Professional Documents
Culture Documents
Price List
Price List
Price List
2019
with reverse
with reverse flame
flame
with WARO
flat pipe technology
cy ronic
f fic ien s h yd h
Hi gh
e r bi - Fi rst o ve s wit g y
c o lle cto C om anks st ol o
s ol ar ge t woo d me tecn
stora s e fla
v e r
re
obligatory:
Adress: _______________ I have taken note of and agree with the data protection provisions
according to valid DSGVO (EU 2016/679) presented on the webpage:
www.wallnoefer.it GTC & Privacy
_______________ optional:
I agree that for the purpose of advice and quoting my address will
Tel.
_______________ be forwarded to local dealers.
optional:
Mail:
_______________ I would like to receive the Wallnöfer newsletter to be kept informed
about new products.
___________________________________________
Notes
_____________________________________________
The solar system is planned for:
Persons: _____
O Hot domestic water
O Hot domestic water and room heating
O Swimming pool Orientation solar field:
O EAST _____°
Inclination of the solar field (f.ex. roof): _________ °
O WEST _____°
Which mounting system is needed: O high snow load (> 1300 a.s.l.)
O Roof mounting system O In - roof system O Tin roof system O Mounting system for flat tiles
O Inclinated frame with inclination of: ____ ° O Frame with adjustable inclination O Wall mounting system 90°
Which boiler / storage tank should be offered: (if desired we make a proposal)
O Boiler O Compact Boiler
Alternative heat source: O Walltherm® Mod: ________________ O to add on the offer O just installed
Whicht heating system is installed: O Floor heating system O Wall heating system O Radiators O ___________
How is the yearly energy demand: _________ kwh/m², Jahr (if available)
O Open air swimming pool Size and depth: ______________ m O Indoor swimming pool Size and depth: ___________ ____m
O Is a cover for the night - time existing O with dehumidification plant
Transport costs: O
info@wallnoefer.it
Solar kits:
I) Kit Solino 300
2 x Solar collector KA88/2020 Standard size (1,8 m²)
K A88
Roof mounting kit for 2 solar collectors in one group
Kit of connection fittings for 2 solar collectors, vertical mounting
/2020
with WARO
flat pipe technology
K A88
output
solar system
2.778 Watt
Stand
3.563.-
ard
10.413.-
Prices in Euro without tax and transport costs.
Errors, changes or additions are reserved. 3
Sun & Wood:
IV) Kit with 7,5 m² of thermal solar
Example:
1”
with WARO
X
flat pipe technology
1/2”
Gas Oil
Walltherm® Vajolet
1”
6/4”
2 6/4” 6/4”
+- 6/4”
1/2”
6/4”
7,5m²
6/4”
2 6/4”
6/4”
+- 1/2”
6/4”
6/4”
1”
max. Power
output
solar system
5.715 Watt
Logix24
600
3 x Solar collectors KA88/2020 Comfort (2,5 m²)
Roof mounting kit for 3 solar collectors in one group
Kit of connection fittings for 3 solar collectors, vertical mounting
Digital controller WAL03 with additional sensor PT1000
Pump unit with high efficiency pump 220 V
Antifreeze liquid (concentrate) 25 lt
Expansion vessel for solar system 35 lt
Kit with 7,5 m² of solar thermal solar Expansion vessel heating system 60 lt
collectors, the hydronic wood stove Storage tank Logix24 Kombi 600 lt
Walltherm® Kaminofen and a storage tank.
with stratification solar heat exchanger in copper 12.113.-
Recommended for an appartement of
approx. 100 m² and 4 - 5 persons.
and fresh water heat exchanger in stainless steel
Walltherm® Vajolet with pump unit and thermal mixing valve
with WARO
flat pipe technology
Logix24
10m² 1.000 Logix24
max. Power
output
solar system
7.620 Watt
4 x Solar collectors KA88/2020 Comfort (2,5 m²)
Roof mounting kit for 4 solar collectors in one group
Kit of connection fittings for 4 solar collectors, vertical mounting
Digital controller WAL03 with additional sensor PT1000
Walltherm® Vajolet
KA88/2020 Comfort
Big size 2,5 m²
with aluminium case
2020
KA88/2020 INOX
Big size 2,5 m²
with stainless steel case
Height: 88 mm
Absorbing surface in
Width: 1050 mm
copper with absorbance of: Length: 2350 mm
Surface: 2,47 m²
95 % 10 years of guarantee for solar collectors
Absorber surface: 2,31 m²
Volume absorber: 0,6 l/m²
with stainless steel case
Weight without liquid/m²: 19,45 kg/m²
5 years of guarantee for solar collectors Weight without liquid/coll.: 48 kg
with aluminium case
Operating pressure: max. 6 bar
max. test pressure: 9 bar
max. stagnation temp.: 250°C
Copper heat exchanger: Keymark certified
Solar glass:
Solarglass with 92 % transparency
Rate of flow:
Top Performance: -0 = 0,84 if high flow 50l/m²,h
if low-flow 30 l/m²,h
heat exchanger
made completely
in copper KA88/2020 Standard 1,8 m²
with stainless steel case
with WARO
C I E NC flat pipe technology Height: 88 mm
F FI
Width: 920 mm
Y
E
-0 =
K A88 Length: 1940 mm
Surface: 1,80 m²
SW2002 665,00.-
Absorbing surface in
copper with absorbance of:
95 %
*by reason of the patented
Waro - Flat pipe technology 10 years guarantee
A quality product from South Tyrol
20 mm
10x more contact surface than with standard absorbers. 2 mm (contact surface)
*Info: If the installation is planned in horizontal position on a wall with an angle of 90°, the lateral openings
for aeration has to protected with separeted covers deliverd from Wallnöfer.
SW0106 SW0106G
verticale installation
110,00 115,00
Price per collector
verticale installation
with additional rail, SW0106-S SW0106G-S
recommended in
areas high altitude 160,00 165,00
a.s.l. 1300 m Price per collector
Intermediate cover
Standard size Big size
SW0170 SW0170G
This installation kit for solar collectors vertical
get delivered with special brackets 110,00 115,00
for roofs with flat tiles.
SW0171 SW0171G
horizontal
154,00 168,00
Price per collector
Prices in Euro without tax and transport costs.
Errors, changes or additions are reserved. 7
Installation possibilities: B
Product group
SW0262 SW0262G
horizontal
95,50 110,00
Price per collector
Aluminium frame
Price per collector
Customized aluminium
frame
SW0023 SW0023G
We need informations and a drawing of
your aluminium frame.
vertical 188,00 210,00
Example for a drawing: Price per collector
This frame made with aluminium profiles allows to adjust the inclination
from: 30° - to - 60°
SW0022 SW0022G
273,00 295,00
vertical
Price per collector
orientation
SW0296 SW0296G
horizontal
orientation 300,00 325,00
Price per collector
1 x SW0860 1 x SW0099
1 x SW0137
1 x SW0820
1 x SW0099
1 x SW0104
1 x SW0099 1 x SW0820
1 x SW0137
4 x SW0099
2 x SW0094
2 x SW0820
Diameter: Thread:
DN16 (1/2") = 3/4"
DN20 (3/4") = 1"
DN25 (1") = 1 1/4"
All threads are plan with seal and
TWIN applicable to connect the Twin solar pipes.
Solar pipes
DN20: Compression fitting
22 mm - 1" Ext. thread
SW0097
14,50.-
3 pc. Reinforcement bush
Compression elbow tube - tube 22 - 22 necessary
22 - 22 mm 18,90.-
2 pc. Reinforcement bush 2 pc. Reinforcement bush
necessary necessary
Kit compression fittings with manual Kit compression fittings without air
air bleeder for horizontal collector connection bleeder for horizontal collecor connection
SW0140 SW0141
58,00.- 43,00.-
- 2 elbows
X X - corrugated X X
X
X
manual air
bleeder 38,00.-
Tee with probe for the collector Straight cylindrical 2 pc. Reinforcement bush necessary
sensor pipe/male with plain
ends and o-ring
2 pc. Reinforcement bush 22 mm - 1" Ext. th. X X
necessary X X
SW0860 9,50.-
SW0195
Cross compression fitting with
35,00.- probe and manual air bleeder 3 way valve for solar systems 1”
convenient for direct with returning spring
connection to
TWIN solar pipe DN20 Without electricity
AB - B open.
Connection 1 pc. Reinforcement bush
kit with necessary SW0015
SW0193 A
automatic B
air bleeder 46,00.- 139,00.-
X
AB
SW0216 15,50.-
Pump unit for bigger solar systems:
- inclusive wall mounting system and Pump unit for bigger Pump unit for
flexible pipe for the expansion vessel solar systems with Wilo variable differential pressure: Δp–v
bigger solar systems
- 2 thermometers Yonos PARA ST 7.5 pump constant differential pressure: Δp–c
with Wilo Pico
- 2 valves with non - return flap (Power input 4 - 75 Watt) STG 7,5 pump PWM- speed control
- 2 valves to load or discharge the PWM - speed control
solar circuit (Power input 4 - 75 Watt)
variable differential pressure: Δp–v
- security pressure valve 6 bar
- manometer 0 - 6 bar
constant differential pressure: Δp–c SW1220 590,00.-
- flowmeter 7 - 30 lt/min PWM- speed control
- high efficiency pump
- connecction 1" M for flat seal
Possibility for direct connection to Twin- solar pipe SW0090H
DN20 535,00.- Adjustment of the flowmeter:
Kit compression nuts for pump unit: - high flow: ca. 50l/m²,h
- low flow: ca. 30l/m²,h
Kit with 2 compression nuts 22 mm
SW0155 133,00.-
25 kg
SW0157
Propylen glycol (nontoxic), protection for solar system.
20 kg
Mixture:
% Antifreeze liquid % Water Freezing temp.: 95,00.-
37 63 -20 °C
48 52 -30 °C
.
Refractometer
Diameter in mm Content: lt/m
Measurement of the antifreeze liquid protection temperature.
Content per 18 0,18
22 0,28
meter copper
SW0112 pipe:
28 0,49
35 0,81
75,00.-
Prices in Euro without tax and transport costs.
Errors, changes or additions are reserved.
13
Solar controller: B
Product group
Digital controller
Controller SDS029
with cooling funktion
T1
D
Controller WAL03 Product group*
*valid only for this article
WT0055
Optimized controller for a solar system
with adjustable cooling function (holiday function)
and Walltherm® hydronic stove. 315,00.-
Sensors:
Sensor for
Sensor PT 1000 for controllers:
TR301 (PWM), TR603 mc, controller: SW0052
WAL01-03, WAL-Touch SDS029
& SDS038-H3 22,00.-
SW0283 22,00.-
WT0054
51,00.-
T1 T1
SW0167 T1,T2,T3,P1, P2
SW0282
495,00.- P1 P2 P1
T3
P1
140,00.-
T3 T2 T2
R3
Expansion vessels:
for solar systems: for heating systems:
for hot 24 lt SW0130 62,00.- 24 lt SW0630 49,00.-
domestic 35 lt SW0131 110,00.- 35 lt SW0631 85,00.-
water: 50 lt SW0132 145,00.- 60 lt SW0633 136,00.-
18 lt SW0660 80 lt SW0133 199,00.- 80 lt SW0634 159,00.-
51,00.- 100 lt SW0142 265,00.- 100 lt SW0635 192,00.-
150 lt SW0143 380,00.- 150 lt SW0637 272,00.-
Adjustable thermostat
Pump unit heating circuit SDS038-H3 with sensor
with mixing valve For blocking function of the
heating system
Pump unit for all heating circuits (radiators or
floor heating system) with high efficiency pump Blocking funktion: This function controls if the
and mixing valve. storage tank is in temperature before starting the
pump of the heating system.
SW0164 195,00.-
SW1260
490.-
External heat exchanger:
Kombi storage tank for hot domestic water and technical heating water.
Equipped with generous copper heat exchanger with optimized stratification
and hygienic fresh water heat exchanger for LOGIX24
hot domestic water. 8 5 6
Solar system
el. heating elements
3 Thermometers
1” Gas Öl...
X - heating
Complementary systems
storage tank - domestic
water
1/2” 1”
1
6/4”
2 6/4” 6/4”
4
+- 6/4”
1/2”
6/4”
Info:
6/4”
Walltherm
New positions
2 6/4” for the
6/4”
+- 1/2”
6/4”
different
connections.
6/4” 1 solar system
1” 2 el. heating element
5 radiators
3 Oil - Gas boiler
6 floor heating system
Solar heat exchanger 4 Biomass -
with stratification case 7 7 cold domestic water
hydronic wood stove
8 hot domestic water
(Walltherm®)
Fresh water
heat exchanger
Storage tank: S235JR Output of hot domestic water in liter: 410 780 1050
Fresh water heat exch.: stainless steel with completely heated storage tank on 60°C (temp. hot dom. water min. 40 °C):
Pressure test fr. water exch.: 10 Bar
max. operating pressure:
Fresh water heat exchanger (stainless steel) in m²: 4,5 7,5 10
hot domestic water 6 Bar
max. operating pressure
technical heating water: 3 Bar Solar heat exchanger (copper) in m²: 3,9 3,9 3,9
Solar heat exchanger: Copper
Insulation: 100 mm Fleece Content solar heat exchanger in lt: 3,2 3,2 3,2
Fire protection class: B1
Guarantee: 5 Years Energy efficiency class: C C C
Logix24
PUFFER SOLAR 600 1000 1300
Content in Liter: 600 950 1290
6/4”
Thermometer 6/4”
El. heating elements
Complementary storage tank 2
6/4”
+- 6/4”
6/4”
Thermometer
El. heating elements
1”
Complementary storage tank
Fresh water 7
heat exchanger
LOGIX24 Logix24
Logix24 Hot water
Hot water 600 1000 1300 Solar system
El. heating elements
Thermometer
Content in Liter: 600 950 1290 EL heating
Th. elements
Complementary
Width without insulation in mm: 700 790 950 storage tank
Heating sys. Heating sys.
Width with insulation in mm: 900 990 1150 Hot domestic water Hot domestic water
1 1/2”
SW1750M SW1751M SW1752M SW1754M
fresh water
cold heat exchanger Euro: 1.850.- 1.999.- 2.270.- 3.150.-
w. 1"
Niro R1
with fresh water heat exchanger
Niro R1 1 pc. heat exchanger 600 800 1000 1500
X 1”
Width without insulation in mm: 650 790 790 1000
hot w.
1" Width with insulation in mm: 850 990 990 1200
1 1/2”
connections 1 1/2" Height with insulation in mm: 1940 1930 2110 2240
FF 1" Sensors 1/2" Heat exchanger m² and lt: 2 m² 11,4 lt 2,5 m² 14,2 lt 3 m² 16,6 lt 3,5 m² 20,5 lt
Niro R2
Niro R2 with fresh water heat exchanger
X 1”
2 pc. heat exchanger 600 800 1000 1500
Width without insulation in mm: 650 790 790 1000
hot w.
1"
1 1/2” Width with insulation in mm: 850 990 990 1200
FF 1" connections 1 1/2"
Height with insulation in mm: 1940 1930 2110 2240
1 1/2” heat exchanger
Diagonal measure in mm: 1960 1970 2145 2290
RF 1" +-
el. heating element 1 1/2" Fresh water heat exchanger in m²:
1 1/2” 5,1 6,4 7,6 8,9
FF 1" sensors 1/2"
Upper heat exchanger m² and lt: 2 m² 11,4 lt 2 m² 11,8 lt 2 m² 11,8 lt 3m² 19 lt
heat exchanger Lower heat exchanger m² and lt: 2 m² 11,4 lt 2,5 m² 14,2 lt 3 m² 16,6 lt 3,5 m² 20,5 lt
1 1/2”
RF 1"
fresh water C C C C
cold heat exchanger Energy efficiency class:
w. 1"
Weight in kg: 220 270 315 390
Material storage tank: S235JR
Fresh water heat exchanger: stainless steel 316 L SW1750R2 SW1751R2 SW1752R2 SW1754R2
max. operation pressure san.: 6 bar
max. operation pressure tank: 3 bar 2.050.- 2.280.- 2.550.- 3.550.-
heat exchanger solar ...: S135JR
Insulation : 100 mm Fleece Prices in Euro without tax and transport costs.
Fire protection class: B1
Guarantee: 5 Years
Errors, changes or additions are reserved.
19
Boiler “Compact” Product group
B
Boiler enamelled Anode 1 1/4"
for hot domestic water
with two heat exchanger
with 70 mm insulation Hot water
with pre- installed pump unit FF Oil/Gas
1/2”
with solar controller
with solar expansion vessel Circulation
FF solar
RF solar
1/2”
Flange
Cold water
Ø with insulation
Cold water
Ø with insulation
Pump unit for filling up
solar systems:
Accessories:
Protection
Standard size:
sticker
SW0113 13,00.-
Big size:
SW0113G 15,50.-
In this case the heat transfer medium is air which gets heated up from the sun
during the circulating through the solar air collector.
Tempering function:
SW0185 250,00.-
Frame photovoltaic
2x modul
SW0188 45,00.-
in
igi
al
Pricelist 2019 na
l
al
in
Th
e Orig
Prices in Euro without tax and transport costs. Boiler stoves & stoves
Errors, changes or additions are reserved.
Request for proposal of a Walltherm®:
Name: _______________
Your address:
optional:
Tel.
_______________ I agree that for the purpose of advice and quoting my address will
be forwarded to local dealers.
optional:
Mail:
_______________ I would like to receive the Wallnöfer newsletter to be kept informed
about new products.
___________________________________________
Note:
_____________________________________________
How is the chimney situation: (drawing recommended):
*The recommended chimney
situation:
O Height _______ m
O Insolation: _____________ mm
45°
500
Material of the chimney: O stainless steel mm
O ceramic
O _______________
Combustion air:
O directly from the room O from external air channel O el. air flap 125 mm
Stove type:
O Walltherm AIR
® Controller
for the pump start:
Front panel: (Vajolet & Vajolet Basic stoves):
O stainless steel O Rust effect O black painted O grey painted O Air ventilator
with controller O Thermostat
O WAL03
®
O Walltherm Vajolet O Wal - Touch
Color:
O black O grey O white - black - white O black - red - black O Firepanel O Steel „nature“
®
O Walltherm Vajolet Basic
Handle (fume flap) extension: O Standard frame O Frame with included door
O Yes O stainless steel Frame: O stainless steel O black
O black painted Door: O black O white
>87%
only 12,4 mg/Nm³
of dust
Walltherm® Air
K 6362011T1
Walltherm® Air
Efficiency: >87 %
Norm: EN13240
Art. 15a (2015) BVG (AT)
Energy efficiency class:
Nominal heat output:
A+
12 KW
Walltherm® AIR
Min/max. heat output: 6 - 12 KW
Heat transfer: Radiation and
optional forced hot air (fan)
Scope of delivery:
Cleaning brush (flue channels),
Dust: 12,4 mg/Nm³ fireplace poker, stove broom
Dimensions: height - width- depth: 1300 x 480 x 518 mm and ash shovel.
Volume combustion chamber: 55 lt
Flue gas draught: 12 Pa (gasification flame) - max. 20 Pa
Weight: ca. 300 kg Color: Black Grey
ext. air channel backside: Ø 125 mm
ext. sir channel bottom: Ø 125 mm WT3000S WT3000A
Chimmney connection: Ø 150 mm (internal)
Flue gas mass flow: 10,1 g/s
Temperature fume gas (reverse flame):
Temp. fume gas pre-heating:
~ 179,9 °C
300 - 350 °C
3.950,00.-
Air fan: 0 - 220 m³/h
Air channels backside: 2 x Ø 125 mm
El. power input: 230 V
Combustible: natural wood logs
max. lenght 35 cm - max. humidity <20% Surcharge
for air fan and digital controller
Guarantee*: 5 years stove body (without spare parts)
2 years for electrical parts
WT3010 244,00.-
*For the legal guarantee it is necessary that the first operation Kit air fan and digital controller.
get`s supervised of authorized installers and to send The controllers case is intended for
the first operating protocoll to the producer. flush mounted installation
near the stove.
480 480
240 240 78 1 Hot plate
2 Cover flue gas channels
3 3 Hot air exit upside
81
189
518
I Ø150
*Adapter Ø 125 mm
A Ø155
for air channels
(combustion air and also hot air channels)
480 mm 480 mm
240 240 90 90
103
25
WT0156S WT0156A
Ø1
black 53,00.-
grey
Price per pc.
4
Hot air exit with white cover
and internal flap
1300
1180
(Ø 125 mm)
Walltherm
WT0535 83,00.-
Price per pc.
25 5
Ø1
Air entry
hot air heat
exchanger
395 85
Black Edition
(right stove side)
Surcharge if orderd with the stove
WT0103 95,00.-
Design- Panel:
The Walltherm® Air can be provided with following
design- panels:
5 cm
50 cm
75 cm
black
Front panel in black
WT0091S-AIR
WT0194S
132,00.- 105,00.-
Rust effect Stainless steel
Example:
1”
with WARO
X
flat pipe technology
1/2”
Gas Oil
Walltherm® Vajolet
1”
6/4”
2 6/4” 6/4”
+- 6/4”
1/2”
6/4”
7,5m²
6/4”
2 6/4”
6/4”
+- 1/2”
6/4”
6/4”
1”
max. Power
output
solar system
5.715 Watt
Logix24
600
3 x Solar collectors KA88/2020 Comfort (2,5 m²)
Roof mounting kit for 3 solar collectors in one group
Kit of connection fittings for 3 solar collectors, vertical mounting
Digital controller WAL03 with additional sensor PT1000
Pump unit with high efficiency pump 220 V
Antifreeze liquid (concentrate) 25 lt
Expansion vessel for solar system 35 lt
Kit with 7,5 m² of solar thermal solar Expansion vessel heating system 60 lt
collectors, the hydronic wood stove Storage tank Logix24 Kombi 600 lt
Walltherm® Kaminofen and a storage tank.
with stratification solar heat exchanger in copper 12.113.-
Recommended for an appartement of
ca. 100 m² and 4 - 5 persons.
and fresh water heat exchanger in stainless steel
Walltherm® Vajolet with pump unit and thermal mixing valve
with WARO
flat pipe technology
Logix24
10m² 1.000 Logix24
max. Power
output
solar system
7.620 Watt
4 x Solar collectors KA88/2020 Comfort (2,5 m²)
Roof mounting kit for 4 solar collectors in one group
Kit of connection fittings for 4 solar collectors, vertical mounting
Digital controller WAL03 with additional sensor PT1000
Walltherm® Vajolet
Example:
X
Gas Oil
1" 1"
2
+-
Walltherm® Vajolet
with pump unit and thermal mixing valve
controller WAL03
Expansion vessel 60 lt 8.101.-
Storage tank Niro R2 800 lt
with two heat exchangers and fresh water heat exchanger
®
VII) Walltherm hydronic wood stove
with storage tank ALFA designed for heat pumps
and fresh water station:
Kit with hydronic wood stove Walltherm® and storage tank Alfa designed for heat pumps
with dividing plat for two seperated temperature areas
with fresh water station for hygienic hot water preparation.
The Walltherm® is
Possibility to get combinated with a heat pump or other heating sources.
Recommended for an appartement of approx. 100 m² and 4 - 5 persons. the perfect
addition to an
air/water heat pump
X
Walltherm® Vajolet
with pump unit and thermal mixing valve
controller WAL03 Heat
pump
Expansion vessel 60 lt
Storage tank ALFA 800 lt
Info: The heat pump, the pump units for
Fresh water station heating circuits, it`s controller and the security
8.431.- systems aren`t included in this kit.
in
E
igi
Y
al
91% na
l
al
only 13,2 mg/Nm³
Walltherm® STE
EL
in
of dust
S r
Th
e Orig
IN LES
ha mbe
Vajolet S TA ustion c
Com
b Trust the Original
Efficiency:
91%
Power output min/max.: 8 - 15 KW
Nominal power output: 10 KW
Energy efficiency class: A+
Heat distribution: up to 80% water side
& 20 % radiation
Dust: 13,2 mg/Nm³
Heigh / Width / Depth: 1373 mm / 531 mm / 635 mm
Volume combustion chamber ~55 lt
Flue gas draught (without draught generator) 12 Pa (max. 20 Pa)
Weight ca. 300 kg (without water content)
Water content ca. 80 lt
Operating pressure max. 2,5 bar
ext. combustion air backside/bottom: Ø 125 mm
Chimney connection: Ø 150 mm (innen)
Flue gas mass flow: 8,8 g/s
Temperature fume gases (reverse flame): ca. 120 - 160 °C
Temp. fume gases pre- heating: ca. 250 - 400 °C
Combustible: natural wood logs
max. lenght 35 cm - max. humidity <20%
Walltherm® Vajolet in
black Norms: EN13240 / Art. 15a (2015) BVG
Safety distance to flammable parts:
laterally / backside / front 10 cm / 10 cm / 100 cm
Walltherm® Vajolet in
grey
®
Walltherm Mod. Vajolet
High efficiency pump
inclusive Pump unit Energy efficiency class: A
Surcharge
Surcharge on stoves price:
Surcharge on stoves price: on stoves price: WT0930
WT0921 125,00.- 155,00.-
WT0925 Info for steel „nature“:
On this natural steel covers
185,00.- can be some marks of the
bending tools.
Black- Edition
Walltherm® Vajolet
The doors of the stoves
black with
Walltherm® Vajolet & Vajolet Basic
Black Edition
can be delivered black coated.
doors
Doors
Black Edition
Surcharge for + colors
doors in version black ,
Black Edition:
red , black
WT1200
95,00.-
Surcharge for
the combination:
black, red, black: WT0900 145,00.-
Prices in Euro without tax Surcharge for
and transport costs. the doors in vers. WT1200 95,00.-
Black Edition:
Errors, changes or additions are reserved.
29
Optionals:
C
Product group
WT0030 86,00.-
Important:
The left door handels must be ordered
at the stoves purchase.
WT1100 112,50.-
black WT0991S
grey WT0991A
This optional cover hides white WT0991W
the water connections on the
backside of the stove. 34,00.-
Prices in Euro without tax and transport costs.
Errors, changes or additions are reserved.
30
Optionals: C
Product group
black
black WT0197
WT0192S 97,00.-
87,00.-
grey
steel „nature“ WT0192A Measuring device
for firewood moisture
WT0195 109,00.- 97,00.-
WT0300
35,00.-
E
Product group
Wood deposit with Deposit
two trays for wood logs
Grid - Design
For wood logs: max. lenght 35 cm
This modern
wood deposit
is made for wood
logs with a lenght
of 35 cm.
black
WT0216S
Black WT0181S 235,00.-
grey Info: The door can be
mounted with left or Grey WT0181A 235,00.-
WT0216A right lever.
367,00.-
Prices in Euro without tax and transport costs.
Errors, changes or additions are reserved.
31
Walltherm®
Das Original
The first water heating
wood gasification stove C
Product group
in
igi
al
L na
l
al
Walltherm E
STE
in
SS er Th
e Orig
I NLE h amb
Vajolet Basic S TA ustion c
Co mb Trust the Original
Efficiency:
91%
Power output min/max.: 8 - 15 KW
Nominal power output: 10 KW
Energy efficiency class: A+
Heat distribution: up to 80% waterside
& 20 % radiation
Dust: 13,2 mg/Nm³
Heigh / Width / Depth: 1364 mm / 517 mm / 628 mm
Volume combustion chamber ~55 lt
Flue gas draught (without draught generator) 12 Pa (max. 20 Pa)
Weight ca. 300 kg (without water)
Water content ca. 80 lt
Operating pressure max. 2,5 bar
ext. combustion air backside/bottom: Ø 125 mm
Chimney connection: Ø 150 mm (internal)
Flue gas mass flow: 8,8 g/s
Temperature fume gases (reverse flame): ca. 120 - 160 °C
Temp. fume gases pre- heating: ca. 250 - 400 °C
Combustible: natural wood logs
max. lenght 35 cm - max. humidity <20%
I C I E NC
FF Guarantee*: 5 years for the stoves body
E
1" 1"
WT1800 150.-
Info: The distance between
the stoves covering (ceramic ...)
Frame black painted: and the steel frame has
to be minimum 1 cm
to avoid the distensions
WT1810 190.- of the stove are causing
cracks.
Frame black
painted with door in black: WT1901 215.-
WT0455
The Firepanels can get painted with
230,00.-
Kit Firepanel
with upside covers in metal
Pull the handle to open
the fume flap. in color:
Push the handle to close
the fume flap. (reverse flame) black WT0950S
grey WT0950A
white WT0950W
WT0011-V 149,00.-
925,00.-
Prices in Euro without tax and transport costs.
Errors, changes or additions are reserved.
33
Controller WAL03 D
developed to regulate the functions of Product group
the hydronic Walltherm® wood stove
and a thermal solar system
Digital Controller for Walltherm® and solar system
with acoustical alert if fume gas temperature exceeds the max. temp.
with regulation of the combustion air flap to avoid thermal loss
Important: with cooling function / holiday function for the solar system
This controller has to be
mounted near the Walltherm®
with 3 water sensors PT 1000 (Storage tank lower and higher side, water temp. of the stove,
the sensor for the solar system has to be ordered separately)
stove in the living room.
Otherwise you can`t use with 1 fume gas sensor
all functions.
WT0055 315,00.-
Possible combinations:
A) only Walltherm® B) only solar system C) Walltherm® + solar system
- stove pump function (60°C + temp. difference of 6°C) - solar pump function (temp. difference of 5 - 20°C) - stove pump function (60°C + temp. difference of 6°C)
- el. comb. air flap - cooling function / holiday function. - el. comb. air flap - acoustic alert max. fume temp.
- acoustic alert max. fume temp. - solar pump function (Temp. difference of 5 - 20°C)
- cooling function / holiday function.
Start button
T4
Air channel 3 m
El. air flap
spring - loaded, in aluminium:
closes the flap
without electricity.
Thermostat with
2000 mm capillary sensor
Thermostat
Alternative for the pump start
for the Walltherm® Vajolet / Vajolet Basic (0 - 90°C)
(0 - 90°C)
Air flap
with flange
WT0025-K
Prices in Euro without tax 43,00.- WT0025
and transport costs.
43,00.-
Errors, changes or additions are reserved.
34
Chimney pipes: D
Product group
Pipe with inspection cover black ø 150 L=750mm (=700 mm) WT0234-I 75,00.-
Pipe with inspection cover grey ø150 L=750mm (=700 mm) WT0235-I 85,00.-
Pipe with inspection cover black ø 150 L=1000mm (=950 mm) WT0236-I 88,00.-
Pipe with inspection cover grey ø150 L=1000mm (=950 mm) WT0237-I 100,00.-
9
15
Seal of the Curve 45° with inspection cover, black ø150 WT0240 45,50.-
265
inspection cover Curve 45° with inspection cover, grey ø150 WT0241 53,00.-
WT0255
50
7,00.-
Chimney muff black ø150 L=150mm WT0242 39,00.-
Chimney muff grey ø150 L=150mm WT0243 43,00.-
H 150 mm
Ø Outside 250 mm
Ø I 158 mm
Ø E 300 mm Rose elliptic in black ø150 WT0250 23,00.-
Rose elliptic in grey ø150 WT0251 25,00.-
H 176 mm
Tele- Muff in black ø150 mm WT0254-TELE 75,00.-
speed controller
Dimensions: Ø I 199 mm - Ø E 303 mm - Height: 686 mm, 10,4 kg,
Power input: 20 - 160 Watt
WT0362I Connection
single wall (male) Connection facet
175,00.- Connection
insulated pipe single wall (female) WT0369I
insulated pipe
500 mm pipe with
7,50.-
WT370I
inspection cover WT0371I
67,50.-
WT0356I-I 67,50.-
M
247,50.-
F
End piece with
WT0364I
condens discharge 75,00.- Prices in Euro without tax and transport costs.
Errors, changes or additions are reserved.
36
Errors, changes or additions are reserved.
Wallnöfer Energiesysteme
Stand 05.2019
Solar heated headquarter in South Tyrol
Prad am Stilfserjoch
Italy
www.wallnoefer.it
www.walltherm.com