Professional Documents
Culture Documents
3.1.4 CO and Mapping SD Lab Com
3.1.4 CO and Mapping SD Lab Com
Semester: VI
Subject Code: NCE -651
Subject Name: Structural Detailing Lab
Course Outcomes:
Upon the Completion of this course, the student will be able to:
Course Knowledge
Statement
Outcome No. Level, KL
Design principle of R.C.C. sections. Limit state method of design
CO1 Loads and stresses to be considered in the design as per I.S. code K1, K2 , K3
provision.
Design & detailing of a i) simply supported R.C.C Beam ii)
CO2 K1, K2 , K3
Continuous T-Beam.
Student should be able to Design & Detailing of columns, isolated
CO3 K1, K2 , K3
and combined footing.
Design of different units: Slab, beam column, roofing and staircase
CO4 from floor plan of a multistoried frame building, typical detailing of a K1, K2 , K3
two way floor slab.
KL- Bloom’s Knowledge Level (K1, K2, K3, K4, K5, K6)
K1- Remember, K2- Understand, K3- Apply, K4- Analyze, K5- Evaluate, K6- Create
CO2 2 2 1 1 3 - - - - 3 2 - 2 - 1
1 2 3 1 3 - - - - 3 2 - 3 1 -
CO3
CO4 1 2 1 1 2 - - - - 3 2 - 2 1 -
Course - - - 2 1.5
1 3 1 2 2.6 - - 2 3 _
(RCE552)