Professional Documents
Culture Documents
Working Psro
Working Psro
Length of Stretch in Mtr Designed location Details of Cable Poles & High Mast Details
Details of Length of Total
Details of the of Electrical Under Pass Canopy 10M DA
S.No Circuit Details Start Stretch poles Cable Size Cable 10M SA 10M SA 10M SA 10M DA 30M HM Connected
Location End CH panel & Power From To Luminaire Luminaire 200W+
CH Length connected (Mtr) 180W 200W 250W 250W 400W load in KW
Source 220W
Circuit-1 70100 70250 150 P1 to P4 FP TLB-1 P5 4Cx6Sq.mm Al.Ar 136 0 0 0 0 0 4 0 0 1.00
1 Truck lay bay-1 Circuit-2 70250 70400 150 KM:70+250 LHS P5 to P9 FP TLB-1 P6 4Cx6Sq.mm Al.Ar 170 0 0 0 0 0 5 0 0 1.25
Incomer Source FP TLB-1 4Cx6Sq.mm Al.Ar 50 0 0
Circuit-1 89100 89650 550 A1 to A19 FP-1 A-19 4Cx10Sq.mm Al.Ar 540 0 0 6 0 13 0 0 0 6.54
Circuit-2 89650 89880 230 A20 to A29 FP-1 A-20 4Cx6Sq.mm Al.Ar 260 0 0 10 0 0 0 0 0 1.80
Circuit-2 89880 90120 240 B14 to B23 A-29 B-14 4Cx6Sq.mm Al.Ar 260 0 0 0 9 0 0 0 0 1.80
5 Flyover Circuit-3 89100 89480 380 KM:89+650 RHS B1 to B13 C-1 B-13 4Cx6Sq.mm Al.Ar 416 0 0 0 13 0 0 0 0 2.60
Circuit-3 89480 89650 170 C1 to C7 FP-1 C-7 4Cx6Sq.mm Al.Ar 182 0 0 7 0 0 0 0 0 1.26
Circuit-4 89650 90120 470 C8 to C25 FP-1 C-8 4Cx10Sq.mm Al.Ar 510 0 0 10 0 8 0 0 0 5.16
Incomer Source FP-1 4Cx35Sq.mm Al.Ar 100 0 0
Circuit-1 80600 HM-1 Admin Bld HM-1 4Cx25Sq.mm Al.Ar 200 0 0 0 0 0 0 0 12 4.80
Circuit-2 80850 HM-2 Admin Bld HM-2 4Cx25Sq.mm Al.Ar 75 0 0 0 0 0 0 0 12 4.80
Circuit-3 80730 HM-3 Admin Bld HM-3 4Cx25Sq.mm Al.Ar 150 0 0 0 0 0 0 0 14 5.60
P1 to P11 +
Circuit-4 80160 80500 340 (P23,25,26,27 FP-2 P11 4Cx25Sq.mm Al.Ar 941 0 0 0 0 0 6 11 0 7.00
,28,29)
6 Toll Plaza KM:80+650 RHS
P12 to P22 +
Circuit-5 80930 81290 360 FP-2 P12 4Cx25Sq.mm Al.Ar 699 0 0 0 0 0 3 11 0 6.25
(P30,31,24)
Supply Installation
S.No Description of Work/Item UOM Qty Total Amount
Rate Rate
POLES & MAST
SINGLE ARM POLE ON EXISTING CIVIL
FOUNDATION -
Supply & Installation of Hot Dip Galvanized
Octagonal Pole Suitable for 39m/s wind speed
This Includes the
Following items
i)Foundation Bolts and
1
Accessories.
ii)Single arm bracket (Tilt & Length
as per Lighting design).
iii)Internal
Junction box, which includes 6mm thick Hylam Sheet,
63A 4P Heavy Duty Connector, DIN rail Mounting
arrangement, 10A SP MCB 1Nos
1.a 10 Mtr Pole Nos 96 13,192 950 1,357,632
ii)Supply of
Fe415/500 grade TMT Bars, M20 grade Concrete and
required water.
5.a 10 Mtr Pole Nos 118 3,500 2,500 708,000
LED LUMINAIRES
CABLES
FLEXIBLE COPPER CABLE:
Supply & Running of the following Flexible Copper
11
Cable
EARTHING
14.a For Electrical Panels body earthing (Each 2Nos) Nos 18 2,750 3,250 108,000
14.b For High Mast body earthing (Each 2Nos) Nos 6 2,750 3,250 36,000
Mounting Arrangement:
The above said Lighting Control Panel shall be mounted
on the MS angle iron frame work with bolt & nut
Arrangement. The MS angle frame of size 50mm x
50mm x 6mm (NS) 120 cm long legs out of which 60 cm
for duly grouting in cement concrete 1:2:4 inside the
17
ground. The MS frame work is duly painted with one
coat of red oxide & two coats of superior quality enamel
black colour paint complete etc. as reqd.
Mounting Arrangement:
The above said Lighting Control Panel shall be mounted
on the MS angle iron frame work with bolt & nut
Arrangement. The MS angle frame of size 50mm x
50mm x 6mm (NS) 120 cm long legs out of which 60 cm
for duly grouting in cement concrete 1:2:4 inside the
18
ground. The MS frame work is duly painted with one
coat of red oxide & two coats of superior quality enamel
black colour paint complete etc. as reqd.
Mounting Arrangement:
The above said Lighting Control Panel shall be mounted
on the wall.
19
Supplying & fixing of following accessories /
components in the above said feeder pillar including
connection testing etc. as reqd.
16A, 4P, 10KA, MCB - 1 No. as Incomer.
16A, 3P, AC3 Duty Contactor - 01 Nos.
Single Dial Analog Timer for Automatic Switching
ON/OFF - 01 Nos
10A, 1P, D-Curve MCB - 6 Nos. as outgoing.
Auto/Manual Selector Switch - 01 Nos
Spreader Terminals for incoming MCCB
3P Incoming Terminal block - 1 Set (Suitable to
terminate upto 4cx50 sq.mm Al.Ar Cable)
3P Outgoing Terminal block - 3 Set (Suitable to
terminate upto 4cx35 sq.mm Al.Ar Cable)
CONDUITS
Supply & Installation of PVC Conduit 20mm Nominal
21 dia x 1 Runs. Includes clamps, screws, plugs etc. Mtr 65 20 400 27,300
CABLE TRENCH
Making of Cable Trench 800mm(Depth)x300(Width)
22 Without Sand Cushion & Mtr 5,859 0 85 498,015
Brick/Tile Protection
TOTAL BASIC AMOUNT Rs. 7,509,118
Additional Cost towards freight, handling etc in Hilly area @ 15% on the above Rs. 1,126,368
ii)Supply of
Fe415/500 grade TMT Bars, M20 grade Concrete and
required water.
5.a 10 Mtr Pole Nos 9 3,500 2,500 54,000
LED LUMINAIRES
CABLES
FLEXIBLE COPPER CABLE:
Supply & Running of the following Flexible Copper
11
Cable
EARTHING
14.a For Electrical Panels body earthing (Each 2Nos) Nos 2 2,750 3,250 12,000
14.b For High Mast body earthing (Each 2Nos) Nos 0 2,750 3,250 0
Mounting Arrangement:
The above said Lighting Control Panel shall be mounted
on the MS angle iron frame work with bolt & nut
Arrangement. The MS angle frame of size 50mm x
50mm x 6mm (NS) 120 cm long legs out of which 60 cm
for duly grouting in cement concrete 1:2:4 inside the
17
ground. The MS frame work is duly painted with one
coat of red oxide & two coats of superior quality enamel
black colour paint complete etc. as reqd.
Mounting Arrangement:
The above said Lighting Control Panel shall be mounted
on the MS angle iron frame work with bolt & nut
Arrangement. The MS angle frame of size 50mm x
50mm x 6mm (NS) 120 cm long legs out of which 60 cm
for duly grouting in cement concrete 1:2:4 inside the
18
ground. The MS frame work is duly painted with one
coat of red oxide & two coats of superior quality enamel
black colour paint complete etc. as reqd.
Mounting Arrangement:
The above said Lighting Control Panel shall be mounted
on the wall.
19
Supplying & fixing of following accessories /
components in the above said feeder pillar including
connection testing etc. as reqd.
16A, 4P, 10KA, MCB - 1 No. as Incomer.
16A, 3P, AC3 Duty Contactor - 01 Nos.
Single Dial Analog Timer for Automatic Switching
ON/OFF - 01 Nos
10A, 1P, D-Curve MCB - 6 Nos. as outgoing.
Auto/Manual Selector Switch - 01 Nos
Spreader Terminals for incoming MCCB
3P Incoming Terminal block - 1 Set (Suitable to
terminate upto 4cx50 sq.mm Al.Ar Cable)
3P Outgoing Terminal block - 3 Set (Suitable to
terminate upto 4cx35 sq.mm Al.Ar Cable)
CONDUITS
Supply & Installation of PVC Conduit 20mm Nominal
21 dia x 1 Runs. Includes clamps, screws, plugs etc. Mtr 0 20 400 0
CABLE TRENCH
Making of Cable Trench 800mm(Depth)x300(Width)
22 Without Sand Cushion & Mtr 356 0 85 30,260
Brick/Tile Protection
TOTAL BASIC AMOUNT Rs. 374,807
Additional Cost towards freight, handling etc in Hilly area @ 15% on the above Rs. 56,221
ii)Supply of
Fe415/500 grade TMT Bars, M20 grade Concrete and
required water.
5.a 10 Mtr Pole Nos 8 3,500 2,500 48,000
LED LUMINAIRES
CABLES
FLEXIBLE COPPER CABLE:
Supply & Running of the following Flexible Copper
11
Cable
EARTHING
14.a For Electrical Panels body earthing (Each 2Nos) Nos 2 2,750 3,250 12,000
14.b For High Mast body earthing (Each 2Nos) Nos 0 2,750 3,250 0
Mounting Arrangement:
The above said Lighting Control Panel shall be mounted
on the MS angle iron frame work with bolt & nut
Arrangement. The MS angle frame of size 50mm x
50mm x 6mm (NS) 120 cm long legs out of which 60 cm
for duly grouting in cement concrete 1:2:4 inside the
17
ground. The MS frame work is duly painted with one
coat of red oxide & two coats of superior quality enamel
black colour paint complete etc. as reqd.
Mounting Arrangement:
The above said Lighting Control Panel shall be mounted
on the MS angle iron frame work with bolt & nut
Arrangement. The MS angle frame of size 50mm x
50mm x 6mm (NS) 120 cm long legs out of which 60 cm
for duly grouting in cement concrete 1:2:4 inside the
18
ground. The MS frame work is duly painted with one
coat of red oxide & two coats of superior quality enamel
black colour paint complete etc. as reqd.
Mounting Arrangement:
The above said Lighting Control Panel shall be mounted
on the wall.
19
Supplying & fixing of following accessories /
components in the above said feeder pillar including
connection testing etc. as reqd.
16A, 4P, 10KA, MCB - 1 No. as Incomer.
16A, 3P, AC3 Duty Contactor - 01 Nos.
Single Dial Analog Timer for Automatic Switching
ON/OFF - 01 Nos
10A, 1P, D-Curve MCB - 6 Nos. as outgoing.
Auto/Manual Selector Switch - 01 Nos
Spreader Terminals for incoming MCCB
3P Incoming Terminal block - 1 Set (Suitable to
terminate upto 4cx50 sq.mm Al.Ar Cable)
3P Outgoing Terminal block - 3 Set (Suitable to
terminate upto 4cx35 sq.mm Al.Ar Cable)
CONDUITS
Supply & Installation of PVC Conduit 20mm Nominal
21 dia x 1 Runs. Includes clamps, screws, plugs etc. Mtr 0 20 400 0
CABLE TRENCH
Making of Cable Trench 800mm(Depth)x300(Width)
22 Without Sand Cushion & Mtr 288 0 85 24,480
Brick/Tile Protection
TOTAL BASIC AMOUNT Rs. 332,596
Additional Cost towards freight, handling etc in Hilly area @ 15% on the above Rs. 49,889
ii)Supply of
Fe415/500 grade TMT Bars, M20 grade Concrete and
required water.
5.a 10 Mtr Pole Nos 15 3,500 2,500 90,000
LED LUMINAIRES
CABLES
FLEXIBLE COPPER CABLE:
Supply & Running of the following Flexible Copper
11
Cable
EARTHING
14.a For Electrical Panels body earthing (Each 2Nos) Nos 2 2,750 3,250 12,000
14.b For High Mast body earthing (Each 2Nos) Nos 0 2,750 3,250 0
Mounting Arrangement:
The above said Lighting Control Panel shall be mounted
on the MS angle iron frame work with bolt & nut
Arrangement. The MS angle frame of size 50mm x
50mm x 6mm (NS) 120 cm long legs out of which 60 cm
for duly grouting in cement concrete 1:2:4 inside the
17
ground. The MS frame work is duly painted with one
coat of red oxide & two coats of superior quality enamel
black colour paint complete etc. as reqd.
Mounting Arrangement:
The above said Lighting Control Panel shall be mounted
on the MS angle iron frame work with bolt & nut
Arrangement. The MS angle frame of size 50mm x
50mm x 6mm (NS) 120 cm long legs out of which 60 cm
for duly grouting in cement concrete 1:2:4 inside the
18
ground. The MS frame work is duly painted with one
coat of red oxide & two coats of superior quality enamel
black colour paint complete etc. as reqd.
Mounting Arrangement:
The above said Lighting Control Panel shall be mounted
on the wall.
19
Supplying & fixing of following accessories /
components in the above said feeder pillar including
connection testing etc. as reqd.
16A, 4P, 10KA, MCB - 1 No. as Incomer.
16A, 3P, AC3 Duty Contactor - 01 Nos.
Single Dial Analog Timer for Automatic Switching
ON/OFF - 01 Nos
10A, 1P, D-Curve MCB - 6 Nos. as outgoing.
Auto/Manual Selector Switch - 01 Nos
Spreader Terminals for incoming MCCB
3P Incoming Terminal block - 1 Set (Suitable to
terminate upto 4cx50 sq.mm Al.Ar Cable)
3P Outgoing Terminal block - 3 Set (Suitable to
terminate upto 4cx35 sq.mm Al.Ar Cable)
CONDUITS
Supply & Installation of PVC Conduit 20mm Nominal
21 dia x 1 Runs. Includes clamps, screws, plugs etc. Mtr 0 20 400 0
CABLE TRENCH
Making of Cable Trench 800mm(Depth)x300(Width)
22 Without Sand Cushion & Mtr 482 0 85 40,970
Brick/Tile Protection
TOTAL BASIC AMOUNT Rs. 579,287
Additional Cost towards freight, handling etc in Hilly area @ 15% on the above Rs. 86,893
ii)Supply of
Fe415/500 grade TMT Bars, M20 grade Concrete and
required water.
5.a 10 Mtr Pole Nos 0 3,500 2,500 0
LED LUMINAIRES
CABLES
FLEXIBLE COPPER CABLE:
Supply & Running of the following Flexible Copper
11
Cable
EARTHING
14.a For Electrical Panels body earthing (Each 2Nos) Nos 2 2,750 3,250 12,000
14.b For High Mast body earthing (Each 2Nos) Nos 0 2,750 3,250 0
Mounting Arrangement:
The above said Lighting Control Panel shall be mounted
on the MS angle iron frame work with bolt & nut
Arrangement. The MS angle frame of size 50mm x
50mm x 6mm (NS) 120 cm long legs out of which 60 cm
for duly grouting in cement concrete 1:2:4 inside the
17
ground. The MS frame work is duly painted with one
coat of red oxide & two coats of superior quality enamel
black colour paint complete etc. as reqd.
Mounting Arrangement:
The above said Lighting Control Panel shall be mounted
on the MS angle iron frame work with bolt & nut
Arrangement. The MS angle frame of size 50mm x
50mm x 6mm (NS) 120 cm long legs out of which 60 cm
for duly grouting in cement concrete 1:2:4 inside the
18
ground. The MS frame work is duly painted with one
coat of red oxide & two coats of superior quality enamel
black colour paint complete etc. as reqd.
Mounting Arrangement:
The above said Lighting Control Panel shall be mounted
on the wall.
19
Supplying & fixing of following accessories /
components in the above said feeder pillar including
connection testing etc. as reqd.
16A, 4P, 10KA, MCB - 1 No. as Incomer.
16A, 3P, AC3 Duty Contactor - 01 Nos.
Single Dial Analog Timer for Automatic Switching
ON/OFF - 01 Nos
10A, 1P, D-Curve MCB - 6 Nos. as outgoing.
Auto/Manual Selector Switch - 01 Nos
Spreader Terminals for incoming MCCB
3P Incoming Terminal block - 1 Set (Suitable to
terminate upto 4cx50 sq.mm Al.Ar Cable)
3P Outgoing Terminal block - 3 Set (Suitable to
terminate upto 4cx35 sq.mm Al.Ar Cable)
CONDUITS
Supply & Installation of PVC Conduit 20mm Nominal
21 dia x 1 Runs. Includes clamps, screws, plugs etc. Mtr 65 20 400 27,300
CABLE TRENCH
Making of Cable Trench 800mm(Depth)x300(Width)
22 Without Sand Cushion & Mtr 0 0 85 0
Brick/Tile Protection
TOTAL BASIC AMOUNT Rs. 81,546
Additional Cost towards freight, handling etc in Hilly area @ 15% on the above Rs. 12,232
ii)Supply of
Fe415/500 grade TMT Bars, M20 grade Concrete and
required water.
5.a 10 Mtr Pole Nos 55 3,500 2,500 330,000
LED LUMINAIRES
CABLES
FLEXIBLE COPPER CABLE:
Supply & Running of the following Flexible Copper
11
Cable
EARTHING
14.a For Electrical Panels body earthing (Each 2Nos) Nos 2 2,750 3,250 12,000
14.b For High Mast body earthing (Each 2Nos) Nos 0 2,750 3,250 0
Mounting Arrangement:
The above said Lighting Control Panel shall be mounted
on the MS angle iron frame work with bolt & nut
Arrangement. The MS angle frame of size 50mm x
50mm x 6mm (NS) 120 cm long legs out of which 60 cm
for duly grouting in cement concrete 1:2:4 inside the
17
ground. The MS frame work is duly painted with one
coat of red oxide & two coats of superior quality enamel
black colour paint complete etc. as reqd.
Mounting Arrangement:
The above said Lighting Control Panel shall be mounted
on the MS angle iron frame work with bolt & nut
Arrangement. The MS angle frame of size 50mm x
50mm x 6mm (NS) 120 cm long legs out of which 60 cm
for duly grouting in cement concrete 1:2:4 inside the
18
ground. The MS frame work is duly painted with one
coat of red oxide & two coats of superior quality enamel
black colour paint complete etc. as reqd.
Mounting Arrangement:
The above said Lighting Control Panel shall be mounted
on the wall.
19
Supplying & fixing of following accessories /
components in the above said feeder pillar including
connection testing etc. as reqd.
16A, 4P, 10KA, MCB - 1 No. as Incomer.
16A, 3P, AC3 Duty Contactor - 01 Nos.
Single Dial Analog Timer for Automatic Switching
ON/OFF - 01 Nos
10A, 1P, D-Curve MCB - 6 Nos. as outgoing.
Auto/Manual Selector Switch - 01 Nos
Spreader Terminals for incoming MCCB
3P Incoming Terminal block - 1 Set (Suitable to
terminate upto 4cx50 sq.mm Al.Ar Cable)
3P Outgoing Terminal block - 3 Set (Suitable to
terminate upto 4cx35 sq.mm Al.Ar Cable)
CONDUITS
Supply & Installation of PVC Conduit 20mm Nominal
21 dia x 1 Runs. Includes clamps, screws, plugs etc. Mtr 0 20 400 0
CABLE TRENCH
Making of Cable Trench 800mm(Depth)x300(Width)
22 Without Sand Cushion & Mtr 2,268 0 85 192,780
Brick/Tile Protection
Additional Cost towards freight, handling etc in Hilly area @ 15% on the above Rs. 422,071
ii)Supply of
Fe415/500 grade TMT Bars, M20 grade Concrete and
required water.
5.a 10 Mtr Pole Nos 31 3,500 2,500 186,000
LED LUMINAIRES
CABLES
FLEXIBLE COPPER CABLE:
Supply & Running of the following Flexible Copper
11
Cable
EARTHING
14.a For Electrical Panels body earthing (Each 2Nos) Nos 8 2,750 3,250 48,000
14.b For High Mast body earthing (Each 2Nos) Nos 6 2,750 3,250 36,000
Mounting Arrangement:
The above said Lighting Control Panel shall be mounted
on the MS angle iron frame work with bolt & nut
Arrangement. The MS angle frame of size 50mm x
50mm x 6mm (NS) 120 cm long legs out of which 60 cm
for duly grouting in cement concrete 1:2:4 inside the
17
ground. The MS frame work is duly painted with one
coat of red oxide & two coats of superior quality enamel
black colour paint complete etc. as reqd.
Mounting Arrangement:
The above said Lighting Control Panel shall be mounted
on the MS angle iron frame work with bolt & nut
Arrangement. The MS angle frame of size 50mm x
50mm x 6mm (NS) 120 cm long legs out of which 60 cm
for duly grouting in cement concrete 1:2:4 inside the
18
ground. The MS frame work is duly painted with one
coat of red oxide & two coats of superior quality enamel
black colour paint complete etc. as reqd.
Mounting Arrangement:
The above said Lighting Control Panel shall be mounted
on the wall.
19
Supplying & fixing of following accessories /
components in the above said feeder pillar including
connection testing etc. as reqd.
16A, 4P, 10KA, MCB - 1 No. as Incomer.
16A, 3P, AC3 Duty Contactor - 01 Nos.
Single Dial Analog Timer for Automatic Switching
ON/OFF - 01 Nos
10A, 1P, D-Curve MCB - 6 Nos. as outgoing.
Auto/Manual Selector Switch - 01 Nos
Spreader Terminals for incoming MCCB
3P Incoming Terminal block - 1 Set (Suitable to
terminate upto 4cx50 sq.mm Al.Ar Cable)
3P Outgoing Terminal block - 3 Set (Suitable to
terminate upto 4cx35 sq.mm Al.Ar Cable)
CONDUITS
Supply & Installation of PVC Conduit 20mm Nominal
21 dia x 1 Runs. Includes clamps, screws, plugs etc. Mtr 0 20 400 0
CABLE TRENCH
Making of Cable Trench 800mm(Depth)x300(Width)
22 Without Sand Cushion & Mtr 2,465 0 85 209,525
Brick/Tile Protection
TOTAL BASIC AMOUNT Rs. 3,327,075
Additional Cost towards freight, handling etc in Hilly area @ 15% on the above Rs. 499,061