Professional Documents
Culture Documents
Quick-Start Guide: Speedstream 4200 Modem Pppoe Modem Router
Quick-Start Guide: Speedstream 4200 Modem Pppoe Modem Router
Quick-Start Guide: Speedstream 4200 Modem Pppoe Modem Router
Quick-Start Guide
SpeedStream®
4200 Modem
PPPoE Modem
Router
• •
1 SpeedStream® Device
2 Documentation
4 Power supply
5 USB cable
3 4 6 RJ-45 Straight-through
Ethernet cable
5 6 7
Your service provider may include an Ethernet adapter, a line filter, and a wall-mount
filter in your DSL kit. If you received any of these items, follow the instructions
provided in this guide for basic installation. If you need further assistance installing
these items, please contact your service provider.
B Line filter(s)
C Wall-mount filter
A B C
2
Downloaded from www.Manualslib.com manuals search engine
Step 1 >
Install Line Filters
Devices such as fax machines, caller
Stand-alone Line Filter ID boxes, or phones that share
the same phone line as your DSL
account require a line filter, which
prevents noise from disrupting the
1 DSL signal on the phone line. Filters
can be in the form of a stand-alone
line filter or a wall-mount filter.
2
Stand-alone Line Filter
3 For each device that shares the
DSL phone line:
1. Unplug the device’s cord from
the phone jack.
Wall-mount Filter 2. Plug the filter into the
phone jack.
3. Plug the phone cord (or other
device cord) into the filter.
Wall-mount Filter
For a wall-mount phone, install a
1 2 3 wall-mount filter.
1. Remove the phone.
2. Connect the wall-mount filter
to the wall plate.
3. Reconnect the phone.
3
Downloaded from www.Manualslib.com manuals search engine
Step 2 >
Choose an Installation Method
The SpeedStream® device may be connected to either an existing USB port or an Ethernet
port. If you choose to attach the SpeedStream® device via the Ethernet interface, it is only
necessary to complete the steps in Option A. Otherwise, proceed directly to Option B for
USB installation.
Option A >
Ethernet Installation Method
1. Insert the SpeedStream® Installation CD into your CD-ROM drive. This will
automatically start the software installation program. Follow the on-screen
directions to complete the software installation.
2. After the USB driver is installed, continue with PC Configuration Procedures
described on the next page.
If the software installation program does not automatically start, you can manually start it using the
following procedure.
6
Downloaded from www.Manualslib.com manuals search engine
Macintosh Configuration Procedures
Macintosh Configuration
In order to setup the SpeedStream® device, your computer must first be configured to obtain
an IP address from a DHCP server.
Follow the procedure below for OSX: Follow the procedure below for OS9:
1. Click Apple -> System Preferences. 1. Click Apple -> Control Panels -> TCP/IP.
Router Configuration
1. Start your Web browser.
3. Select one of the following from the 2. In the Address box, enter the following:
Show drop-down menu: http://speedstream
• Built–in Ethernet if connecting 3. When prompted for a username and
via Ethernet. password, type admin for the password
• Ethernet Adaptor [en0, en1,...] only (username is not required).
if connecting via USB. 4. Click Login and enter the username
4. Select Using DHCP Server from the and password provided by your
Configure IPv4 drop-down menu. service provider.
5. Click Apply Now and exit out of 5. Click Save.
System Preferences window. 6. If additional configuration is desired,
6. If you have a router, configure the select Setup to configure DHCP, firewall
router using the Router Configuration settings, security options, and also to
procedure that follows. view status and statistical information.
Copyright© 2004 SIEMENS SUBSCRIBER NETWORKS, INC. All rights reserved. Siemens and the Siemens logo
are trademarks of Siemens AG, Germany. All other trademarks are held by their respective companies. Siemens
reserves the right to make changes to product specifications at any time without notice.
8
Downloaded from www.Manualslib.com manuals search engine