Professional Documents
Culture Documents
Awwa Flanges: General Specifications
Awwa Flanges: General Specifications
GENERAL SPECIFICATIONS
AWWA AWWA C207 FLANGES
FLANGES
1. Standard Finishes for Contact Face of AWWA Flange
Grneral Specifications
Class B & D Flanges
Flanges of all classes shall be flat faced-that is, without projection or raised face. The dimensions given for
Table 2 thickness are minimum. the flanges shall be faced smooth or may have a serrated finish of approximately 32
Class D Flanges serrations per inch, approximately 1/64 in. deep. Serrations may be either spiral or concentric.
Table 3
Class E Flanges
Table 4 2. Dimensional Tolerances for AWWA Flanges
Dimension Tolerance in
Bore +1/16 -0
Outside diameter ±1/8
Thickness 18 in and smaller +1/8 -0
20 in and smaller +3/16 -0
Length through Hub +3/16 -1/16
Bolt Circle Diameter ±1/16
Note; For other dimensional tolerances, see ANSI B16.5, page 49.
3. Bolting
Bolts and nuts shall be carbon steel ASTM A307, Grades A or B. Bolts shall have regular unfinished square
or hexagonal heads, and nuts shall have regular square or hexagonal dimensions all in accordance with
ANSI B 18.21 for wrench head bolts and nuts and wrench openings.
All bolts and nuts shall be threaded in accordance with ANSI B1.1 for screw threads, coares-thread series,
Class 2A and 2B fit.
M E T A L - K O R E A F L A N G E S 4. Gaskets
These standards are predicated on the user of either a cloth-inserted rubber gasket 1/16 in. thick or an
absestos ring gasket that is either 1/16 in. or 1/8 in. thick, at the purchaser's option; The gasket shall
extend from the inside diameter or the flange to at least the inside edge of the bolt holes, or it may.
84 METAL-KOREA METAL-KOREA 85
4 9 4.57 5/8 5/8 71/2 8 3/4 3/4 4 9 4.57 1/2 7/8 55/16 71/2 8 3/4 3/4
5 10 5.66 5/8 5/8 81/2 8 3/4 7/8 5 10 5.66 9/16 11/4 65/16 81/2 8 3/4 7/8
6 11 6.72 11/16 11/16 91/2 8 3/4 7/8 6 11 6.72 9/16 11/4 79/16 91/2 8 3/4 7/8
8 131/2 8.72 11/16 11/16 113/4 8 3/4 7/8 8 131/2 8.72 9/16 11/4 911/16 113/4 8 3/4 7/8
10 16 10.88 11/16 11/16 141/4 12 3/4 1 10 16 10.88 11/16 11/4 12 141/4 12 3/4 1
12 19 12.88 11/16 13/16 17 12 3/4 1 12 19 12.88 11/16 11/4 143/8 17 12 3/4 1
14 21 14.19 11/16 15/16 183/4 12 7/8 11/8 14 21 14.19 3/4 11/4 153/4 183/4 12 7/8 11/8
16 231/2 16.19 11/16 1 211/4 16 7/8 11/8 16 231/2 16.19 3/4 11/4 18 211/4 16 7/8 11/8
18 25 18.18 11/16 11/16 223/4 16 7/8 11/4 18 25 18.18 3/4 11/4 197/8 223/4 16 7/8 11/4
20 271/2 20.19 11/16 11/8 25 20 7/8 11/4 20 271/2 20.19 3/4 11/4 22 25 20 7/8 11/4
22 291/2 22.19 3/4 13/16 271/4 20 7/8 13/6 22 291/2 22.19 1 13/4 241/4 271/4 20 7/8 13/8
24 32 24.19 3/4 11/4 291/2 20 7/8 13/8 24 32 24.19 1 13/4 261/8 291/2 20 7/8 13/8
26 341/4 26.19 13/16 15/16 313/4 24 7/8 13/8 26 341/4 26.19 1 13/4 281/2 314/3 24 7/8 13/8
28 361/2 28.19 7/8 15/16 34 28 7/8 13/8 28 361/2 28.19 1 13/4 301/2 34 28 7/8 13/8
30 383/4 30.19 7/8 13/8 36 28 1 13/8 30 383/4 30.19 1 13/4 321/2 36 28 1 13/8
32 413/4 32.19 15/16 11/2 381/2 28 1 15/8 32 413/4 32.19 11/8 13/4 343/4 382/1 28 1 15/8
34 433/4 34.19 15/16 11/2 401/2 32 1 15/8 34 433/4 34.19 11/8 13/4 363/4 402/1 32 1 15/8
36 46 36.19 1 15/8 423/4 32 1 15/8 36 46 36.19 11/8 13/4 383/4 423/4 32 1 15/8
38 483/4 38.19 1 15/8 451/4 32 1 15/8 38 483/4 38.19 11/8 13/4 403/4 451/4 32 1 15/8
40 503/4 40.19 1 15/8 471/4 36 1 15/8 40 503/4 40.19 11/8 13/4 43 471/4 36 1 15/8
42 53 42.19 11/8 13/4 491/2 36 11/8 15/8 42 53 42.19 11/4 13/4 45 492/1 36 11/8 15/8
44 551/4 44.19 11/8 13/4 513/4 40 11/8 15/8 44 551/4 44.19 11/4 21/4 47 513/4 40 11/8 15/8
46 571/4 46.19 11/8 13/4 533/4 40 11/8 15/8 46 571/4 46.19 11/4 21/4 49 533/4 40 11/8 15/8
48 591/2 48.19 11/4 13/4 56 44 11/8 15/8 48 591/2 48.19 13/8 21/2 51 56 44 11/8 15/8
50 613/4 50.19 11/4 2 581/4 44 11/4 17/8 50 613/4 50.19 13/8 21/2 53 581/4 44 11/4 17/8
52 64 52.19 11/4 2 601/2 44 11/4 17/9 52 64 52.19 13/8 21/2 55 601/2 44 11/4 17/8
54 661/4 54.19 13/8 21/6 623/4 44 13/4 17/8 54 661/4 54.19 13/8 21/2 57 623/4 44 13/8 17/8
60 73 60.19 11/2 21/4 691/4 52 13/8 17/8 60 73 60.19 11/2 23/4 63 691/4 52 13/8 17/8
66 80 66.19 15/8 21/2 76 52 13/8 17/8 66 80 66.19 11/2 23/4 69 76 52 13/8 17/8
72 861/2 72.19 13/4 25/8 821/2 60 13/8 17/8 72 861/2 72.19 11/2 23/4 75 821/2 60 13/8 17/8
78 93 78.19 2 23/4 89 64 15/8 21/8 78 93 78.19 13/4 3 811/4 89 64 15/8 21/8
84 993/4 84.19 2 23/4 951/2 64 15/8 21/8 84 993/4 84.19 13/4 3 871/2 951/2 64 15/8 21/8
90 1061/2 90.19 21/4 3 102 68 17/8 23/8 90 1061/2 90.19 2 31/4 933/4 102 68 17/8 23/8
96 1131/4 96.19 21/4 3 1081/2 68 17/8 23/8 96 1131/4 96.19 2 31/4 100 1081/2 72 21/8 25/8
102 120 102.19 21/2 31/4 1141/2 72 21/8 25/8 102 120 102.19 21/4 31/2 1053/4 1141/2 72 21/8 25/8
108 1263/4 108.19 21/2 31/4 1203/4 72 21/8 25/8 108 1263/4 108.19 21/4 31/2 1111/2 1203/4 72 21/8 25/8
114 1331/2 114.19 23/4 31/2 1263/4 76 23/8 27/8 114 1331/2 114.19 21/2 33/4 1173/4 1263/4 76 23/8 27/8
120 1401/4 120.19 23/4 31/2 1323/4 76 23/8 27/8 120 1401/4 120.19 21/2 33/4 124 1323/4 76 23/8 27/8
Notes: Notes:
(1) The 'Bore' (B) shall be 3/16 in. larger than the nominal outside diameter of the pipe, unless otherwise specified. (1) For standard finishes for contact face, refer to apge 48.
(2) For Slip-on Flanges, (Hub Type Flanges), the hubs can be shaped either vertical from base to top or tapered within the limits of 7 degrees.
(3) The 'Bore' (B) shall be 3/16 in. larger than the nominal outside diameter of the pipe, unless otherwise specified.
86 METAL-KOREA
SLIP-ON
DRILLING
Nominal Outside Bore Thickness Length Diam. of
Pipe Diam. Through Hub Bolt Number
Hub Diam. of
Size at Base Circle Diam. of Holes
Bolt Holes
D B t T X C
Notes:
(1) The 'Bore' (B) shall be 3/16 in. larger than the nominal outside diameter of the pipe, unless otherwise specified.