Professional Documents
Culture Documents
10 15 English
10 15 English
and Grading
INTRODUCTION
Contents
10 Drying Samples
Laboratory ovens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hot plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
18
20
Air drier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Microwave oven . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Melting pot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Climatic chambers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Muffle furnaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
11 Weighing Samples
Electronic analytical balances . . . . . . . . . . . . . . . . . . . . . . . . 24
Electronic top loading balances . . . . . . . . . . . . . . . . . . . . . . . 24
Battery operated balances . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Standard calibration masses . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Specific gravity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
15 Sample grading
Sieves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Sieve shakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Wet washing sieves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Bar sieves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Riffle boxes and sample splitters . . . . . . . . . . . . . . . . . . . . . . 37
Drying Samples. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Laboratory ovens
Spare parts
s10-D1396/1
Spare tray for 10-D1396 oven
s10-D1397/1
Spare tray for 10-D1397 oven
10-D1396
10-D1397 s10-D1398/1
Spare tray for 10-D1398 oven
10-D1398
General specifications
Voltages: 230 V, 50-60 Hz, 1 ph. except 10-D1398, 380 V, 50-60 Hz, 3 ph.
General description
These ovens have been specially designed
for the testing laboratories of the construc-
tion industry. The interior is made from zinc
coated steel and the exterior is robustly con-
structed in enamelled steel insulated with
40 to 50 mm thick mineral wool.
Temperature control by precision analogue
or digital thermoregulator/indicator.
Supplied complete with 3 shelves.
The models we propose are available in the
following versions:
- 100 to 400 litres capacity
- Natural or forced convection
- Temperature range from ambient to
200°C 10-D1391/AD
- Analogue or digital thermostat /indica-
tor
- 230 V, 50-60 Hz, 1 ph. General specifications
or 110 V, 60 Hz, 1 ph. on request.
Nominal 100 l 220 l 400 l
capacity models models models
B Dimensions
- internal (mm) 436x435x500 984x435x500 984x435x935
- external (mm) 705x565x700 1235x565x700 1148x715x1320
Available models
M Code Capacity Natural Forced Digital Voltage
litres convec- convec- thermostat/
tion tion indicator
Detail of the digital control panel 10-D1390 100 Yes - - 230V/50-60Hz
10-D1390/AD 100 - Yes Yes 230V/50-60Hz
10-D1391 220 Yes - - 230V/50-60Hz
10-D1391/AD 220 - Yes Yes 230V/50-60Hz
10-D1392/AD 400 - Yes Yes 230V/50-60Hz
Spare parts
s10-D1390/1
Spare tray for 100 l cap. ovens
s10-D1391/1
Spare tray for 220 and 400 l cap. ovens
10-D1390
Drying Samples. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hot plates / Air drier / Melting pot
547x528x339 mm approx.
tion switch. 230 V, 50-60 Hz, 1 ph. 1100 W, 230 V, 50 Hz, 1 ph.
A Weight approx.: 26 kg
M 10-D1402/A Used to dry small quantities of soil and
Hot plate, 160 mm dia., bimetallic aggregate particles and useful for other
thermostat. 230 V, 50-60 Hz, 1 ph. general laboratory purposes. Specifically
used in the surface drying of aggregates.
Used in the laboratory for a large variety of
applications. Two versions available: tempe- A Weight approx.: 1.5 kg
rature control by a multiposition switch
(10-D1402) or by bimetallic thermostat
(10-D1402/A).
10-D1424
M 10-D1424 M 10-D1403
Digital microwave oven, 30 litres Melting pot. 230 V, 50-60 Hz, 1 ph.
capacity. 230 V, 50 Hz, 1 ph.
Used to melt wax and similar materials. The
Particularly suitable for high speed drying temperature is set and maintained at the
applications in the laboratory, such as desired value. Adjustable electronic ther-
drying, conditioning, pre-heating and moi- moregulator and pilot lamp fully isolated
sture determination. They provide a fast conforming to CE requirements. Supplied
and accurate drying action. complete with cover.
M 10-D1401/E
Digital hot plate, 300x400 mm, alu-
minium alloy/stainless steel plate.
230 V, 50-60 Hz, 1 ph.
10-D1401/E
General specifications
400x300x142 mm (lxwxh)
10-D1401/D A Weight approx.: 18 kg 10-D1403
Accessories
M 10-D1429/REC
Upgrade of the cabinet controller with
internal data recording facility, data
10-D1429
output port and dedicated PC software.
Drying Samples. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Muffle furnaces
M 10-D1418/A
Muffle furnace 1200°C max. tem-
perature. 230 V, 50-60 Hz, 1 ph.
M 10-D1418/AZ
Same as above but 110 V, 60 Hz, 1 ph.
q STANDARD
EN 196-2
10-D1418
Max. temperature: 1200°C
Accuracy: ± 4°C
Inside dimensions:
muffle furnaces 210x280x145 mm (lxwxh)
Power: 4.2 kW
B Outside dimensions: 510x650x650 mm 10-D1419
M 10-D1418
Muffle furnace 1100°C max. A Weight approx.: 70 kg
M 10-D1419
temperature. 230 V, 50-60 Hz, 1 ph.
Muffle furnace 1100°C max.
M 10-D1418/P temperature. High capacity, floor
Muffle furnace 1100°C max. mounting model.
temperature with temperature 220-380 V, 50-60 Hz, 3 ph.
programmer. 230 V, 50-60 Hz, 1 ph.
Specifications
M 10-D1418/AP
Max. temperature: 1100°C
Same as above but 110 V, 60 Hz, 1 ph.
Inside dimensions:
300x220x500 mm (wxhxd)
General description and specifications
Electronic thermoregulator and 24
Used for high temperature heating and hour timer
drying.
Accuracy: ± 4°C
Power: 9 kW
Max. temperature: 1100°C
B Outside dimensions:
A Weight approx.: 89 kg
Introduction
Balances are a general pur- How to select balances Minimum mass of sample
pose laboratory apparatus used either for sieve analysis (1)
Where not specified by the relevant stan-
for soil, aggregates, cement, concrete dards, the tables given below may be used to Nominal size Minimum mass
and asphalt testing. Controls supply select the appropriate balance conforming of material of sample
a wide range of electronic models to the general specification for balances mm kg
suitable for different applications given in the ASTM D4753-95, BS 1377:Part
ranging from the central labora- 1, and EN 932-5. 63 50
50 35
tories field use, educational etc. Very often a single specification requires
40 15
Battery operated models are balances having a readability and tole- 28 5
particularly suitable for field use. We rance of 0.1% of the specimen mass to be 20 2
also propose a range of accessories measured which is another suitable choice 14 1
criteria. 10 0.5
and calibration weights to periodi-
Other standards covering aggregates and 6 0.2
cally check the balances. granular materials in general give informa- 5 0.2
tion about the quantity of aggregate to be 3 0.2
tested depending upon its size (UNI 8520 <3 0.1
part 5, BS 812: part 1, BS 598 etc.). The dif-
ferent standards give practically the same (1) BS 812:1
recommendation so we have included this
information in a separate table.
Weighing samples. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Electronic analytical balances
Electronic precision top loading balances
11-D0613/B
General specifications
Capacity: 205 g
Readability: 0.1 mg
Tolerance: ± 0.3 mg
Tare range: by subtraction up to full
11-D0629 11-D0628
capacity
Display: LCD seven segments
Data interface: bi-directional RS 232,
selectable baud rate
Facility for weighing underneath the
M Code
Capacity Readability Pan Weight 110 V, 60 Hz
balance and dimension approx. adapter
Power supply: 230 V AC, 50-60 Hz tolerance code
Pan dia.: 80 mm 11-D0628 330 g 0.001 g 110 mm dia. 6.5 kg 11-D0628/3
B Dimensions: 194x325x315 mm
11-D0629 2200 g 0.01 g 160 mm dia. 6.5 kg 11-D0628/3
11-D0629/A 4100 g 0.01 g 160 mm dia. 6.5 kg 11-D0628/3
A Weight approx.: 8.5 kg approx. 11-D0630/AA 6000 g 0.1 g 150x170 mm 2 kg 11-D0630/3
11-D0630/BB 8000 g 0.1 g 150x170 mm 2 kg 11-D0630/3
11-D0631/B 12000 g 0.1 g 320x210 mm 8 kg 11-D0628/3
Accessories 11-D0631/EE 15000 g 1 g 340x240 mm 7 kg 11-D0630/3
11-D0631/F 16000 g 0.1 g 320x210 mm 8 kg 11-D0628/3
M 11-D0628/3 11-D0631/CC 30000 g 1 g 340x240 mm 7 kg 11-D0630/3
AC adapter for 110 V, 60 Hz, 1 ph.
(For use with 11-D0613/B)
M Code
Capacity Readability Pan Weight 110 V, 60 Hz These palm size light weight digital
and dimension approx. adapter printers are ideal either for laboratory
tolerance code or field use. They are available in three
11-D0630/C 600/4500 g 0.01/0.1 g 160 mm dia. 7.5 kg 11-D0628/3 versions:
11-D0630/D 800/5500 g 0.01/0.1 g 160 mm dia. 7.5 kg 11-D0628/3
11-D0631/G 1000/10000 g 0.1/1 g 190x210 mm 7.5 kg 11-D0628/3 M 82-P0172
11-D0631/L 4500/30000 g 0.1/1 g 320x210 mm 8 kg 11-D0628/3 Serial printer mains operated
230 V, 50-60 Hz, 1 ph.
M 82-P0172/Z
Serial printer mains operated
- All models fitted with Data output RS 232 via serialport RS 232 110 V, 60 Hz, 1 ph.
weighing facility and software.
M 82-P0172/A
Serial printer with rechargeable
internal battery or standard battery
M 82-P0172/1
Cable for RS 232 connections
11-D0631/L 82-P0172
General specifications
120x172x100 mm
A Weight approx.: 1 kg
Weighing samples. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Battery operated balances/ Platform balances
These precise, economical and very easy to use balances are ideal for both central and site
laboratories. All models are fitted with RS 232 output so they can be connected to printers
or PC to process data. Using the AC adapter they can also be mains operated.
Strong and robust, fitted with strain gauge cells with large backlit display, they can operate
from 0 to 40°C. Other general specifications are given in the following table.
All models are supplied complete with AC adapter for 230 V, 50-60 Hz.
For 110 V, 60 Hz AC select suitable adapter. See Table. The batteries are not included.
sCode
Capacity Reada- Tolerance Pan dimension Weight 110 V, 60 Hz
bility mains adapter code
11-D0642 600 g 0.01 g ± 0.02 g 120 mm dia. 1.2 kg 11-D0642/1
11-D0641/F 3000 g 0.01 g ± 0.01 g 120 mm dia. 1.2 kg 11-D0642/1
11-D0642/G 6000 g 0.1 g ± 0.1 g 225x300 mm 3.8 kg 11-D0642/1
11-D0643 10000 g 0.5 g ± 1.5 g 250x210 mm 3.5 kg 11-D0643/1
11-D0643/A 15000 g 0.5 g ± 1.5 g 210x210 mm 2.6 kg 11-D0643/A1
11-D0643/B 20000 g 1 g ± 3 g 250x210 mm 3.5 kg 11-D0643/B1
11-D0644 15000 g 0.2 g ± 0.2 g 225x300 mm 3.5 kg 11-D0642/1
11-D0644/B 30000 g 0.5 g ± 0.5 g 225x300 mm 3.5 kg 11-D0642/1
11-D0644/C 65000 g 1 g ± 3 g 340x240 mm 6.5 kg -
11-D0644/CZ 65000 g 1 g ± 3 g 340x240 mm 6.5 kg included
platform balances
Weighing samples
1111
.................................
Standard calibration masses
M 11-D0708/2
Same as above but for 2 kg weight
M 11-D0708/3
Same as above but for 5 kg weight
M 11-D0708/4
11-D0648/B fitted with vertical support Same as above but for 10 kg weight
Note. These weights are supplied with manufacturer’s certificate of conformity speci-
fying characteristics class and tolerances. The certificate is traceable to SIT standard.
Weighing samples. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Specific gravity / Density baskets
Specific gravity
- Immediate calculation
q STANDARD and display of specific
gravity at the
EN 12390-7 / BS 812:2, 1881:114 touch of a button
M 11-D0612/A
Specific gravity frame
s11-D0631/F
Digital top pan balance 16 kg x 0.1 g
capacity
s11-D0631/C
Digital top pan balance 30 kg x 1 g
capacity
11-D0612 11-D0611/3
Sample grading
1511
...................................
Testing sieves
Introduction
Specifications
a) European b) American
Conforming to the new European EN The sieves are conforming to the following
standards all sieves for the construction standards:
industry are specified by the following
standards: ASTM E11
Wire-cloth sieves for testing purposes.
EN 933-2
Test for geometrical properties of aggre- Note. The sieve specifications are clear-
gates ly marked on the label comprising the
Determination of particle size distribution serial number and other information for
Test sieves, nominal size of apertures the identification and traceability of the
product as requested by the international
ISO 3310-1 specifications. On request each sieve can be
Test sieves of woven wire cloth supplied with a calibration certificate.
Sample grading. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Testing sieves
Sample grading
1511
...................................
Testing sieves
The new European standards also specify that: “Sieves with aperture size of 4 mm and
above shall be perforated plate square hole test sieves(1). Below that size they shall be
woven wire test sieves.”
- Each sieve
is supplied complete
with certificate
of conformity
Sample grading. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Testing sieves
Woven wire cloth sieves (coarse) Woven wire cloth sieves (fine)
Sample grading
1511
...................................
Sieve shakers
Sieve shakers This new and advanced sieve shaker fully Sieve shakers, ELECTROMAGNETIC
satisfy the standards, which require that
for sieves up to 315* mm (12”) dia.
the test material on any given sieve pro-
gresses over the surface of the sieve when M 15-D0407/B
Introduction
it is agitated. Conforming to ISO 3310-1 it Electromagnetic sieve shaker for
We propose three different models which
can hold round sieves up to 315 mm dia. sieves up to 315 mm dia.
differ one to another, for the sieving
The main features of this shaker consists in 230 V, 50-60 Hz, 1 ph.
motion:
the multiple vibration motion:
- Vertical only for the 15-D0407/B - Vertical by the electromagnet
model - Rotational by the three laminated
- Vertical and rotational with conti- suspension springs in both ways.
nuous or intermittent operation and The shaker is provided with a microproces-
adjustable vibration intensity for the sor digital control system with display unit
15-D0409 model for the following functions:
- Vertical, orbital and jarring motion - Timer 0-99 min by 1 min steps or conti-
for the electromechanical model nuous operation
15-D0411. - Continuous or intermittent operation
The 15-D0407/B can also be used, remo- (very important for critical products to
intensify the sieving action reducing the
ving the upper plate, as a vibrating table
duration of operation)
for one concrete specimen. - Adjustable vibration intensity
Specifications
Main features
- Multiple sieving Sieve capacity: up to twelve, 200 mm(8”)
motions
- Microprocessor
and up to eight; 300/315 mm dia. sieves
digital control plus pan and cover
system Power: 400 W approx.
- Continuous
or intermittent B Dimensions: 496x406x946 mm
Sample grading. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sieve shakers
Triple motion Sieve shaker - Vertical two way jarring action high capacity screen shaker
motor operated - Orbital action
- Quick release clamps
- Positive and efficient sieving motion M 15-D0420/A
M 15-D0411 - Sieve timer High capacity mechanical screen
Motorised sieve shaker for sieves up shaker. 230 V, 50 Hz, 1 ph.
to 315 mm diameter.
230 V, 50 Hz, 1 ph. M 15-D0420/AZ
Same as above but 110 V, 60 Hz, 1 ph.
M 15-D0411/Z
Motorised sieve shaker for sieves up Ideal for sizing large quantities of crushed
to 315 mm diameter. stones, sand, gravel, slag, coal, coke, ores,
110 V, 60 Hz, 1 ph. pellets and similar materials. The screen
shaker has a capacity of about 30 litres (1
General description and specifications ft3) of sample. Enabling from two to seven
separations simultaneously. The vibrating
An adaptable sieve shaker designed for use unit consists of interlocking spaces, which
where large batch sizes, large particle sizes support and separate the screen trays. An
or varied sieve sizes are required. equal clearance among trays allows an
This sieve shaker features a unique com- independent removal of each tray. Holds
bination of jarring and orbital action, six screen trays and one dustpan. The
allowing the most positive sieving and screen shaker is supplied complete with
grading. Upper and lower crosshead are one dustpan tray. Screen trays have to be
adjustable to receive and firmly lock the ordered separately
different sizes of sieves. Includes a 30
minute timer and a continuous-stop-timer
Tray dimensions: 457x660x75 mm
operation switch.
Power: 250 W
- Sieve capacity:
15-D0411 with sieves B Dimensions: 584x787x850 mm
Ten 200-203 mm (8”) sieves plus pan and
15-D0400/A1, 15-D0400/A2
Sample grading
1511
...................................
High capacity screen shaker
Screen trays ASTM E11* Intermediate series ISO 3310-1 Screen trays
Woven wire cloth
Woven wire cloth type sCode Sieve Alterna-
op. tive
mm sCode Nominal
aperture
15-D0425 Coarse series
15-D0426/01 4.00 No. 5 15-D0427/E02 80 µm
sCode Sieve Alterna- 15-D0426/02 3.36 No. 6 15-D0427/E04 100 µm
op. mm tive 15-D0426/03 2.83 No. 7 15-D0427/E08 160 µm
15-D0426/04 2.38 No. 8 15-D0427/E10 200 µm
15-D0425/01 101.6 4” 15-D0426/05 2.00 No. 10 15-D0427/E12 250 µm
15-D0425/02 90.5 3H” 15-D0426/06 1.68 No. 12 15-D0427/E14 315 µm
15-D0425/03 76.1 3” 15-D0427/E15 355 µm
15-D0426/07 1.41 No. 14
15-D0425/04 64.0 2H” 15-D0427/E16 400 µm
15-D0425/05 53.8 2.12” 15-D0427/E20 630 µm
Fine series 15-D0427/E22 800 µm
15-D0425/06 50.8 (•) 2”
15-D0427/E26 1.25 mm
15-D0425/07 45.3 1I” sCode Sieve Alterna- 15-D0427/E28 1.6 mm
15-D0425/08 38.1 (•) 1H” op. tive 15-D0427/E34 3.15 mm
15-D0425/09 32.0 1I” mm
15-D0425/10 26.9 1.06”
15-D0427/01 1.19 No. 16 ISO 3310-2 Screen trays
15-D0425/11 25.4 (•) 1” 15-D0427/02 1.00 No. 18
15-D0425/12 22.6 7/8” 15-D0427/03 0.841 No. 20 of perforated metal plate
15-D0425/13 19.0 (•) 3/4” 15-D0427/04 0.707 No. 25
15-D0425/14 16.0 5/8” 15-D0427/05 0.595 No. 30 sCode Nominal
15-D0427/06 0.50 No. 35 aperture mm
15-D0425/15 13.5 .530”
15-D0425/16 12.7 (•) 1/2” 15-D0427/07 0.420 No. 40
15-D0427/08 0.354 No. 45 15-D0425/E05 5.6
15-D0425/17 11.2 7/16” 15-D0425/E08 7.1
15-D0427/09 0.297 No. 50
15-D0425/18 9.51 3/8” 15-D0425/E09 8
15-D0427/10 0.250 No. 60
15-D0425/19 8.0 5/16” 15-D0427/11 0.210 No. 70 15-D0425/E12 10
15-D0425/20 6.73 .265” 15-D0427/12 0.177 No. 80 15-D0425/E13 11.2
15-D0425/21 6.35 1/4” 15-D0427/13 0.149 No. 100 15-D0425/E14 12.5
15-D0425/E16 14
15-D0425/22 5.66 No.3H”
15-D0425/E17 16
15-D0425/23 4.76 No. 4 Fine series with reinforcement mesh 15-D0425/E18 18
(•) Standard set recommended by ASTM 15-D0425/E19 20
sCode Sieve Alterna- 15-D0425/E20 22.4
op. mm tive 15-D0425/E24 31.5
15-D0425/E26 40
15-D0428/01 0.125 No. 120 15-D0425/E28 50
15-D0428/02 0.105 No. 140 15-D0425/E30 56
15-D0428/03 0.088 No. 170 15-D0425/E31 63
15-D0428/04 0.074 No. 200 15-D0425/E33 80
- Can separate up
to 30 dm3 (1 ft3)
of aggregate (65 kg. approx)
- Fine mesh trays reinforced
Sample grading. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sieves brushes/ Wet washing/ Ultrasonic cleansing
M 15-D0160/1
Wet washing sieve 200 mm dia. by
100 mm high
15-D0405
M 86-D1685/G
Accessories
Double ended nylon sieve brush
s15-D0405/3 Cleansing liquid 5l can.
q STANDARD M 15-D0430
EN 933-3, BS 812:1, 1377:2, 1924:1 / ASTM C702 Large capacity sample splitter.
UNI, NF and CNR model
sCode Max. size Slot width No. of slots Capacity Weight
sample (mm) (mm) (dm3) (kg) Specifications
15-D0438 5 7 12 0.24 1.5
15-D0438/A 10 15 12 2 5 For aggregate up to 150 mm size
15-D0438/B 20 30 10 4.6 19 Adjustable openings from: 12.5 mm
15-D0438/C 40 50 8 14 23.5 with 12.5 mm increments
15-D0438/D 13 19 10 3 5.5
15-D0438/E 20 25 10 3.9 19 Clam shell hopper 26 dm3 capacity
15-D0438/F 25 38 8 9.6 19 Complete with two pans
15-D0438/G 50 64 8 21 27
B Dimensions: Overall height: 991 mm
15-D0438/H 40 45 8 11.3 23.5
Hopper size: 737 mm long x 483 mm wide
Each riffle box is supplied with 3 metal pans A Weight approx.: 50 kg
Spare parts
s15-D0430/1
Spare material pan. Weight 2.3 kg
15-D0438 – D0438/H
M 15-D0431
Mini sample splitter No. 16x5 mm
chutes. Stainless steel.
Weight 1.4 kg approx. 15-D0430
Accessories
Contents
16 Field classification, sampling, and preparation
Soil sampling - Augers and samplers . . . . . . . . . . . . . . . . . . 40
Water level indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Pocket penetrometers and vane testers . . . . . . . . . . . . . . . . 42
Field inspection kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Dynamic penetrometers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Extruders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Soil lathe and trimmers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Sample mixers and soil cutter . . . . . . . . . . . . . . . . . . . . . . . . 48
19 Moisture content
Moisture determination balance . . . . . . . . . . . . . . . . . . . . . . 49
Desiccators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Universal carbide meters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Speedy moisture testers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
22 Laboratory Classification
Specific gravity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Liquid, Plastic and shrinkage limits . . . . . . . . . . . . . . . . . . . . 53
Sedimentation / Hydrometer and pipette methods . . . . . . . 55
24 Chemical Tests
pH Papers and meters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Chloride and Sulphate content determination . . . . . . . . . . . 57
pH Meters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Water test kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Soil colour charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Soil sampling
q STANDARD
ASTM D420, D1452 / AASHTO T86, T202 /
CNR a. VI n. 25
s
16-T0005/A Hand auger head 80 mm dia. s16-T0010/6 Stainless steel sample
tubes dia. 38x230 mm (No. 6 pieces)
16-T0010
s16-T0006/A Hand auger head 100 mm
dia. s16-T0010/7 Plastic end caps for sam-
ple tubes dia. 38x230 mm (No. 12 pieces) Used to take undisturbed soil sample in soft
s16-T0007/A Hand auger head 150 mm and fine soils. The apparatus comprises T-
dia. s16-T0010/3 Jarring link handle, Extension rod, Jarring link, Stainless
s16-T0010/8 Hand extruder for sample steel sample tube dia. 38x230 mm length.
tubes dia. 38x230 mm The sample is obtained by percussion, lif-
ting all the upper assembly which slides
s16-T0005/2 Extension rods, 1 m long inside the jarring link and forces the sample
(No. 6 pieces)
tube into the soil.
s16-T0005/1 “T” handle
s16-T0005/5 A Weight approx.: 7 kg
Stillson wrenches (No. 2 pieces)
M 16-T0009/C
Auger power head, 1.5 kW
M 16-T0009/D
Auger power head, complete with
reversing gear. 4.2 kW
A Weight approx.:
8.5 kg for model 16-T0009/C and 22.5 kg
for model 16-T0009/D
Accessories
marked at 1 cm intervals.
Battery operated: 9 V DC
A Weight approx.: 6 kg
16-T0009/C
Pocket penetrometers
Dial Penetrometers
Specifications
(1) Used for evaluating the angle of internal friction “ϕ” of sandy soils and the cohesion
“c” in clay soils. Dual scale: 0-6 kgf/cm2 for 6.35 mm dia. plunger and 0-11 kg.
16-T0171
16-T0163
M 16-T0163
Heavy duty pocket penetrometer Pocket hand vane testers
Used to obtain quickly and easily an appro- M 16-T0174/B
ximate measure of the shear strength of
cohesive and semicohesive soils. The special Hand vane tester
feature of this model is the design of the
penetration rod, which allows a relatively q STANDARD
deep penetration into the soil (up to 6 cm) ASTM D2573
thus reducing errors and uncertainties typi-
cal of shallow measures, which are often A simple and portable instrument for use 16-T0174/B
affected by remoulding, drying, etc.Three by the geotechnical engineer to determine
different sizes of penetration tips are availa- in-situ shear strength of cohesive soils.
ble: the small one for hard soils, the medium The device consists of a torque head with
one for soft and medium soil, and the large direct reading scale into which is fitted
one for soft soil.
310x105 mm
Accessories
s16-T0174/1
Extension rod 500 mm long
Dynamic penetrometers
Dynamic penetrometers
q STANDARD
BS 1377:9
M 16-T0012/A
TRL* Dynamic Cone Penetrometer
(DCP)
B Case dimensions:
1200x350x200 mm approx.
A Weight approx.: 30 kg
Dynamic penetrometers
q STANDARD
DIN 4094
M 16-T0013
Lightweight dynamic penetrometer.
Hand operated
16-T0013/E
Specifications
M 16-T0080
Melting pot
Universal extruder
Mainly used to remove 4” and 6” M 10-D1403
samples from Marshall, Proctor and Melting pot. 230 V, 50-60 Hz, 1 ph.
CBR moulds.
Used to melt wax to seal the soil samples
Capacity: 30 kN 16-T0010/8 with 16-T0010/6 and other materials. The temperature is
Ram travel: set and maintained at the desired value.
197 mm (ram) + 68 mm screw M 16-T0010/8 Adjustable thermostat and pilot lamp fully
isolated conforming to CE requirements.
A Weight approx.: 25 kg Hand extruder Supplied complete with cover.
for 38 mm dia. samples
Accessories
10-D1403
16-T0083/A
Specifications
Soil cutter
Models 65-L0005/2 16-B0072
q STANDARD
NF P94-093
Capacity (litres) 5 10
Planetary 62-125 8 positions from M 16-T0004
speeds (rpm) 50 to 150 rpm
Spindle 140-285 8 positions from Soil cutter 11 l cap.
speeds (rpm) 180 to 540 rpm 230 V, 50 Hz, 1 ph.
Power (W) 120 370
Overall dimensions (mm) 570x340x580 570x340x585 Ideal to disgregate clay lumps to prepare
Weight approx. (kg) 38 32 soil specimens to be compacted. Made in
anodised aluminium and stainless steel.
680x515x430 mm
A Weight approx.: 45 kg
16-L0005/B
16-T0004
48 Testing equipment for the construction industry
Soil Classification
19
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Moisture content
Moisture determination balance / Calcium carbide meters / Desiccators
M 19-T0019
Standard moisture tester
General description
Weight on balance: from 3 to 100 g 86-D1113, 86-D1110/A
Manometer: 0 to 12% range
Set of 4 steel balls Accessories
Balance: Spring type
Standard accessories: s86-D0819 Silica gel (desiccator
- 20 carbide ampoules salts). 1000 g
- 3 test ampoules with 1 g of water for s19-D1113/A Desiccator cabinet.
checking Made from transparent plastic for
19-D0602/B a clear view of content. The unit
- 2 spare seals
includes adjustable shelves. Overall
- 1 set of tools dimensions: 450x480x450 mm. Weight
- 1 metal carrying case approx.: 30 kg
B Dimensions: 520x340x140 mm
A Weight approx.: 8 kg
Spare parts
s19-T0019/1
Spare reagent ampoules. Pack of 100
pieces
19-D1113/A
Moisture content . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Calcium carbide meters method (continued) / Speedy moisture testers
q STANDARD
AASHTO T217
N O T E
When this item is for export there are limi-
tations on the method of transportation.
For export orders the reagent has to be 47-T0023/A with 47-T0021
ordered separately in special packs accor-
ding to international regulations.
Accessories
s47-T0020/B Speedy calibration kit
s47-T0021 Moisture tester reagent. 0.4 kg
47-T0024/A with 47-T0021
76-B0066/1
86-D1112/A, 86-D1110
48-D0441
Accessories
M 48-D0441 s86-D1113/1 Safety cage for glass
Large pyknometer vacuum desiccators
Dessicators
M 86-D1110
Desiccator 200 mm dia. complete
with plate 86-D1113/1
76-B0066/B
M 22-D0445
End-over-end shaker.
230 V, 50 Hz, 1 ph.
M 22-D1132
Gas jar
Glass, 1 litre capacity, supplied complete
with rubber bung and glass cover. Weight:
1.3 kg approx. 22-D2050 with pycnometers
B Dimensions: 920x590x1880 mm
A Weight approx.: 40 kg
Accessories
Cone penetrometers
Used to determine the moisture content
at which clay soils pass from a plastic to a
liquid state and used also for the determi-
nation of undrained shear strenght ( CEN
ISO/TS 17892-12). Two versions available:
the standard one and the semiautomatic
one where the cone is allowed to free fall
for a period of 5 seconds. The apparatus
features:
A cast iron base with levelling feet
Digital penetration measurement
gauge 0.01 mm precision
Micrometer vertical adjustment device
Automatic zeroing
Electronic release mechanism
(22-T0029/AD, model only)
A Weight approx.: 8.5 kg 22-T0029/D with 22-T0029/1 and 22-T0029/3 22-T0029/AD with 22-T0029/1 and 22-T0029/2
Laboratory classification. . . . . . . . . . . . . . . . . . . . . . . . . . .
Liquid limit: Casagrande method
sCode
Standards Grooving tool sCode
22-T0040/4, 86-D1171/A,
22-T0030/E BS 1377:2 22-T0032/P 86-D1329, 86-D1630,
22-T0030/F ASTM D4318 22-T0032/AP 86-D1631, 86-D1537
and UNE 7377 22-T0032/A
22-T0030/F UNI 10014 22-T0033
22-T0030/G NF P94-051 22-T0032/A
Note. Grooving tool models 22-T0032/P and 22-T0032/AP are made of plastic
and supplied in pack of 10.
sCode
Standards Voltage Grooving tool sCode
22-T0031/E BS 1377:2 230 V, 50 Hz, 1 ph. 22-T0032/P 22-T0040/4, 86-D1631,
22-T0031/F ASTM D4318 230 V, 50 Hz, 1 ph. 22-T0032/AP 86-D1172, 82-D1231,
and UNE 7377 86-D1537, 86-D1346
22-T0031/F UNI 10014 230 V, 50 Hz, 1 ph. 22-T0033
22-T0031/FZ ASTM D4318 110 V, 60 Hz, 1 ph. 22-T0032/AP
22-T0032/A
22-T0031/G NF P94-051 230 V, 50 Hz, 1 ph. 22-T0032/A
A Weight: 10,5 kg
22-T0062/1,
22-T0062/2,
22-T0058/A,
22-T0062/3
22-T0041
Laboratory classification. . . . . . . . . . . . . . . . . . . . . . . . . . .
Particle size analysis by the hydrometer method
s22-T0060/31
Rubber bung for 22-D1006/A jar
s22-T0060/A
(1)
s86-D0802
Sodium hexametaphosphate 1000 g
s86-D1073
Beaker 250 cc
s22-T0060/B (1)
Soil hydrometer 152 H - 5 to 60 g/l
( alternative to 22-T0060/A)
22-T0059/A
200x100x600 mm approx.
M 24-D0448/B A Weight approx.: 5 kg
Magnetic stirrer.
Mixing capacity 2.5 l 48-D0543, D0543/A Accessories
230 V, 50-60 Hz, 1 ph.
M 48-D0543 s24-D1840/1
Used for titration and stirring. Variable Ion exchange resin 500 g
speed. Magnetic teflon coated follower Quantab chloride titrator, type
included. 1175 (711195), range 0.005% to
0.1% Na Cl. Pack of 50 strips
B Dimensions:
A Weight approx.: 10 g
24-D0448
24-D1840
Chemical tests. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Ph Meters
pH Meters
q STANDARD
BS 1377:3, ASTM D1067
M 24-D1845
Laboratory pH / mV / °C meter.
Battery and mains operated
24-D1846
M 24-D1846
Portable pH / mV / °C meter.
Battery operated
M 24-D1847
Pocket electronic pH tester.
Battery operated
24-D1847
24-D1845 with magnetic stirrer
Specifications
* Note. For use with 110 V ask for the 24-D1845/1 Adapter
B Dimensions: 260x120x60 mm
B Dimensions: 200x120x60 mm
Used by civil engineers, agronomists, soil
scientists etc. for the determination of soil
24-D1870/A
A Shipping weight: 460 g colour.
For 24-D1860/A the set consists of 7
constant hue charts showing 196 colours.
M 24-D1870/C Chart and diagram are fitted in a pocket
Hardness test kit size binder.
For 24-D1860/T the set consists of 2 charts
which can be fitted into the binder of 24-
In history, water hardness was defined by
D1860/A.
the capacity of water to precipitate soap.
The ionic species in the water causing the
precipitation was later found to be calcium B Dimensions: 140x190 mm approx.
B Dimensions: 200x120x60 mm
24-D1860/A