Professional Documents
Culture Documents
Item 513F: 3/4 Way High Pressure Ball Valve
Item 513F: 3/4 Way High Pressure Ball Valve
Manufacturer of Valves
ZIPSON'S 513F, 3600 psi, 3/4 way high performance center section is also suitable for thread/ SW/ BW
flanged ball valve was designed for the high pressure ends on 513T type.
industrial pipe line. With T/L/X/I-port for 3/4 way block 513F valve can be with cavity fillers to filled all the
body type, easy to find a suitable flow pattern for any valve cavity over 90%. This will help to keep the
application which is a smart way to save the cost on media from leaving in the cavity for easy cleaning &
pipe line construction and space. With ISO direct anti-sticky of the ball. Of course, the internal body
mounting pad design, 513F is able to assemble the need to be machining first for the service.
actuator directly.
The size range of 513F is now complete from 1/2" to
513F was designed according to ASME B16.34. 513F 2" (DN15 to DN50), and will be ready to expand up to
is with 4 seats, this will help to keep the ball position 4" with Class 600 & Class 900 pressure rating soon.
stable . The trunnion ball/ stem help to stand high TFM/ TFM4215 seat material for Class 600 (DN15 to
working pressure and protect the seat and keep from DN50) and PEEK/ Delrin for Class 900/ 1500 is the
leakage to prolong the life time. The valve is totally standard option.
solid designed for oil & gas application or other high
pressure application for both mixing and diverter Extraordinary material such as Hastelloy C, Monel,
purpose. Alloy 20, Duplex are available, too, for special media
or environment.
End caps can be ASME 600/ 900/ 1500. The same
No.9, Chen Kong 2 St., Minhsiung Industrial Park, Chia-Yi, Taiwan, R.O.C.
Tel : 886-5-220-9374 / Fax : 886-5-221-7018
Manufacturer of Valves
http://www.zipson.com.tw E-mail: loogoon@ms22.hinet.net 2006 ZIPSON ALL RIGHTS RESERVED
Manufacturer of Valves
513F, 3/4-Way High Pressure Ball Valve P.2
SPECIFICATION
* Body & end caps quality investment casting 24
* Construction design follow ASME B16.34 standard G
¡¼H
* Flange connection - ANSI B16.50 F
OPTION
* Automation application
* Cavity filler
* Hastelloy C, Alloy 20, Super Duplex, Monel
* Fire safe design
P
13 14 15 16 17 18 19
4 WAY "LL"(X) PORT
12
B1
11
10
27 26
9
E
8
B
7
6
5
D
C
G
A
4
3
2
1 M-N 1/2"~3/4"
6.4
23 22 21 20 T
L
No.9, Chen Kong 2 St., Minhsiung Industrial Park, Chia-Yi, Taiwan, R.O.C.
Tel : 886-5-220-9374 / Fax : 886-5-221-7018
Manufacturer of Valves
http://www.zipson.com.tw E-mail: loogoon@ms22.hinet.net 2006 ZIPSON ALL RIGHTS RESERVED
Manufacturer of Valves
513F, 3/4-Way High Pressure Ball Valve P.3
FLOW PATTERN
3-WAY 4-WAY
ZP
ZP
L3-90
ZP
L5-180
STANDARD 1 2 1 2
ZP
ZP
T3-90 ZP T5-180 ZP
STANDARD 1 2
1 2
ZP
ZP
T4-90 X-90 ZP
1 1 2
2
ZP
ZP
ZP
T5-90 I-90 ZP
1 2 1 2
ZP
ZP
ZP
T-port 90 operation (T3/ T4/ T5/ T6) can be suitable
T6-90 for 4-way valve.
2
1
ZP
No.9, Chen Kong 2 St., Minhsiung Industrial Park, Chia-Yi, Taiwan, R.O.C.
Tel : 886-5-220-9374 / Fax : 886-5-221-7018
Manufacturer of Valves
http://www.zipson.com.tw E-mail: loogoon@ms22.hinet.net 2006 ZIPSON ALL RIGHTS RESERVED
Manufacturer of Valves
513F, 3/4-Way High Pressure Ball Valve P.4
ly)
" on
" ~3/4
(1/2 Lever
)
nly
2"o
Handle nut
Handle
Lever head
Nut stop
Stem nut
Gasket
Disk washer Stopper
End nut
Blank cap
Gasket
End bolts
Seat
Body Seat
Gasket
Gasket
Flange end
Trunnion bushing
Thrust washer
Gasket
Trunnion pin
PRESSURE/ TEMPERATURE
3600
3400
Delrin PEEK
3200 1/4"~1" 1/4"~1"
3000
Delrin PEEK
2800 1-1/4"~2" 1-1/4"~2"
2600
2400
PRESSURE (P.S.I.)
2200
TFM4215
1/4"~1"
2000
TFM4215
1800 1-1/4"~2"
1600
1400 TFM
1/4"~1"
1200
TFM
1000 1-1/4"~2"
800
600
400
200
No.9, Chen Kong 2 St., Minhsiung Industrial Park, Chia-Yi, Taiwan, R.O.C.
Tel : 886-5-220-9374 / Fax : 886-5-221-7018
Manufacturer of Valves
http://www.zipson.com.tw E-mail: loogoon@ms22.hinet.net 2006 ZIPSON ALL RIGHTS RESERVED
Manufacturer of Valves
513F, 3/4-Way High Pressure Ball Valve P.5
Suggestion!
1. As dismantle the ball valve, don't forget to replace new Repair Kits, especially the gasket to prevent from leaking.
2. Before welding the valves, make sure the ends were dismantled. And welding the dismantled ends. After all the ends
be cool, assemble the ends & use new gasket to prevent from leaking.
No.9, Chen Kong 2 St., Minhsiung Industrial Park, Chia-Yi, Taiwan, R.O.C.
Tel : 886-5-220-9374 / Fax : 886-5-221-7018
Manufacturer of Valves
http://www.zipson.com.tw E-mail: loogoon@ms22.hinet.net 2006 ZIPSON ALL RIGHTS RESERVED