Professional Documents
Culture Documents
Design Guide Ovens: Icb Revised 5/ 2019
Design Guide Ovens: Icb Revised 5/ 2019
IC B R EVISED 5 / 2 0 1 9
TA B L E O F C O N T E N T S
M S E R I E S B U I L T- I N O V E N S
32 MICROWAVE OVENS
38 WARMING DRAWERS
B U I L T- I N O V E N S
M Series Built-In Ovens
Four striking looks are just the beginning. Superior perfor- M S ER I ES O V EN S
mance features include our advanced Dual VertiCross™ TRAN SITION A L
convection fan system, touch-screen controls, convenient
preset cooking programs and improved interior lighting.
There is more usable space inside for deliciousness on a
grand scale. M series ovens can be installed in a standard
or flush inset application.
ICBSO30TM/S/TH
ICBDO30TM/S/TH
P ROFESSION A L
ICBSO30PM/S/PH
ICBDO30PM/S/PH
C ON TEMP ORARY
ICBSO30CM/S
ICBDO30CM/S
ICBSO30CM/B
ICBDO30CM/B
subzero-wolf.com.au | 3
M S ER IES O VENS
B U I L T- I N O V E N S
22 218 46 mm
mm mm
51 mm
36 mm
723 CONDUIT 686
mm CHANNEL mm
759 mm 65 584 mm
mm BEHIND FRAME OPEN OVEN DOOR 543
mm
22 218 46 mm
mm mm
51 mm
36 mm
CONDUIT
CHANNEL
1291 1254
mm mm
759 mm 65 584 mm
mm BEHIND FRAME
4 | English
M S ER IES O VENS
B U I L T- I N O V E N S
M Series Built-In Ovens
P RO F ES S IO NAL SINGL E OVE N
22 218 46 mm
mm mm
51 mm
36 mm
723 CONDUIT 686
mm CHANNEL mm
759 mm 83 584 mm
mm BEHIND FRAME OPEN OVEN DOOR 543
mm
22 218 46 mm
mm mm
UPPER OVEN LOWER OVEN
51 mm
36 mm
CONDUIT
CHANNEL
1291 1254
mm mm
759 mm 83 584 mm
mm BEHIND FRAME
subzero-wolf.com.au | 5
M S ER IES O VENS
B U I L T- I N O V E N S
22 218 46 mm
mm mm
51
mm
36 mm
723 CONDUIT 686
mm CHANNEL mm
759 mm 584 mm
BEHIND FRAME OPEN OVEN DOOR 543
mm
22 218 46 mm
mm mm
51
mm
36 mm
CONDUIT
CHANNEL
1291 1254
mm mm
759 mm 584 mm
BEHIND FRAME
6 | English
M S ER IES O VENS
B U I L T- I N O V E N S
M Series Built-In Ovens
C ONT EMPO R ARY SINGL E OVE N—BL ACK GLAS S
25 218 46 mm
mm mm
51 mm
36 mm
723 CONDUIT 686
mm CHANNEL mm
759 mm 584 mm
BEHIND FRAME OPEN OVEN DOOR 543
mm
25 218 46 mm
mm mm
51 mm
36 mm
CONDUIT
CHANNEL
1291 1254
mm mm
759 mm 584 mm
BEHIND FRAME
subzero-wolf.com.au | 7
M S ER IES O VENS
B U I L T- I N O V E N S
Planning Information
The M series oven can be installed in a standard or flush ELEC TR I C AL
inset application. If a cooktop is being installed above an
Installation must comply with all applicable electrical codes
oven, a minimum of 6 mm is required between units. Loca-
and be properly grounded (earthed).
tion of the electrical supply within the oven opening may
require additional cabinet depth. Locate the electrical supply flush with the back wall and
within the shaded area shown in the illustration for your spe-
Finish the edges of the opening. They may be visible when
cific installation on the following pages. For ease of instal-
the door is open.
lation, the electrical supply for the oven can be placed in an
For standard installations, face trim will overlap stiles and adjacent cabinet within reach of the conduit.
rails. Refer to the chart below.
Performance may be compromised if the electrical supply is
For flush inset installations, a minimum 3 mm reveal is less than 220 volts.
required on all sides. To ensure consistent reveals, each
The oven is supplied with a single phase and 3-phase
corner of the opening must be exactly 90°.
convertible power inlet box. The wiring diagram covering the
control circuit is provided with the oven.
INSTALLATION REQUIREMENTS
B A S E S U P P O RT MIN
ELECTRICAL REQUIREMENTS
Single Oven 115 kg
SIN GL E OVEN SIN GL E PH A SE 3- P H A S E
Double Oven 181 kg
Required Power Supply 220-240 V AC 380-415 V AC
TRIM OVERLAP
50/60 Hz 50 Hz
Top 25 mm Maximum Connected Load 4.2– 4.8 kW 3.0–3.6 kW
Bottom 0 mm
D OU BL E OVEN SIN GL E P H A SE 3- P H A S E
Sides 18 mm
Required Power Supply 220-240 V AC 380-415 V AC
50/60 Hz 50 Hz
Maximum Connected Load 8.4– 9.6 kW 4.2–4.8 kW
D U AL INS TALLATION
8 | English
M S ER IES O VENS
B U I L T- I N O V E N S
M Series Single Oven
S TANDAR D INS TAL L ATION
591 mm
OPENING
DEPTH
TOP VIEW
127 E
mm
102
mm
699 mm
OPENING W
HEIGHT OPENING WIDTH
NOTE: Location of electrical supply within opening may require additional cabinet depth.
OPENING WIDTH W
76 cm Model 724 mm
subzero-wolf.com.au | 9
M S ER IES O VENS
B U I L T- I N O V E N S
591 mm
OPENING
DEPTH
TOP VIEW
127 E
mm
102
mm
1267 mm
OPENING W
HEIGHT OPENING WIDTH
E
432 mm
TYPICAL
NOTE: Location of electrical supply within opening may require additional cabinet depth.
OPENING WIDTH W
76 cm Model 724 mm
10 | English
M S ER IES O VENS
B U I L T- I N O V E N S
M Series Single Oven
F LUS H INS ET INSTAL L ATION
22 mm 610 mm
OR FLUSH INSET
25 mm** DEPTH
FINISHED
CLEATS*
TOP VIEW
W
FLUSH INSET WIDTH***
127
28 mm mm E
102
mm
729 mm
FLUSH INSET
HEIGHT***
21 mm E
3 mm E
*25 mm minimum depth. Shaded areas will be visible and should be finished to match cabinetry.
** 22 mm for transitional, professional and contemporary stainless steel models and 25 mm for contemporary black glass model.
***Dimension provides minimum reveals.
NOTE: Location of electrical supply within opening may require additional cabinet depth.
76 cm Model 765 mm
subzero-wolf.com.au | 11
M S ER IES O VENS
B U I L T- I N O V E N S
22 mm 610 mm
OR FLUSH INSET
25 mm** DEPTH
FINISHED
CLEATS*
TOP VIEW
W
FLUSH INSET WIDTH***
127
28 mm mm E
102
mm
1297 mm
FLUSH INSET
HEIGHT***
21 mm E
3 mm E
432 mm
TYPICAL
*25 mm minimum depth. Shaded areas will be visible and should be finished to match cabinetry.
** 22 mm for transitional, professional and contemporary stainless steel models and 25 mm for contemporary black glass model.
***Dimension provides minimum reveals.
NOTE: Location of electrical supply within opening may require additional cabinet depth.
76 cm Model 765 mm
12 | English
M S ER IES O VENS
B U I L T- I N O V E N S
M Series Single Oven
D U AL S TANDARD INSTAL L ATION
591 mm
OPENING
DEPTH
TOP VIEW
127 E 127 E
mm mm
102 102
mm mm
699 mm
OPENING
HEIGHT W
OPENING WIDTH
E E
NOTE: Location of electrical supply within opening may require additional cabinet depth. A dual installation kit is required for this installation.
subzero-wolf.com.au | 13
M S ER IES O VENS
B U I L T- I N O V E N S
22 mm 610 mm
OR FLUSH INSET
25 mm** DEPTH
FINISHED
CLEATS*
TOP VIEW
W
FLUSH INSET WIDTH***
127 127
28 mm mm E mm E
102 102
mm mm
729 mm
FLUSH INSET
HEIGHT***
21 mm
3 mm E E
*25 mm minimum depth. Shaded areas will be visible and should be finished to match cabinetry.
** 22 mm for transitional, professional and contemporary stainless steel models and 25 mm for contemporary black glass model.
***Dimension provides minimum reveals.
NOTE: Location of electrical supply within opening may require additional cabinet depth. A dual installation kit is required for this installation.
14 | English
E SER IES O VENS
B U I L T- I N O V E N S
E Series Built-In Ovens
Stainless models feature a redesigned stainless steel E S ER I ES O VEN S
touch-action control panel, helping to create great meals TRAN SITION A L
with ease, as well as adding a striking design feature to the
kitchen. Smart technology gives the E series ten cooking
WARM LIGHT TEMP MODE OK TIMER TIME OFF
ICBSO30TE/S/TH
ICBDO30TE/S/TH
P ROFESSION A L
ICBSO30PE/S/PH
ICBDO30PE/S/PH
C ON TEMP ORARY
ICBSO30CE/B/TH
ICBDO30CE/B/TH
subzero-wolf.com.au| 15
E SER IES O VENS
B U I L T- I N O V E N S
60 cm E Series Ovens
I C B SO24TE/S/TH
22 mm 559 mm
597 591
mm mm
597 mm 64 546 mm
mm BEHIND FRAME
460
OPEN OVEN DOOR mm
16 | English
E SER IES O VENS
B U I L T- I N O V E N S
76 cm E Series Ovens
T R ANS IT IO NAL SINGL E OVE N
25 mm 244
mm
76 mm
225
mm
CONDUIT
708 CHANNEL 689
mm mm
718 mm
759 mm 70 603 mm
mm BEHIND FRAME
OPEN OVEN DOOR 559
mm
25 mm 244
mm
76 mm
225
mm
CONDUIT
CHANNEL
1280 1261
mm mm
718 mm
759 mm 70 603 mm
mm BEHIND FRAME
subzero-wolf.com.au | 17
E SER IES O VENS
B U I L T- I N O V E N S
76 cm E Series Ovens
P RO F ES S IO NAL SINGL E OVE N
25 mm 244
mm
76 mm
225
mm
CONDUIT
708 CHANNEL 689
mm mm
718 mm
759 mm 86 603 mm
mm BEHIND FRAME
OPEN OVEN DOOR 559
mm
25 mm 244
mm
76 mm
225
mm
CONDUIT
CHANNEL
1280 1261
mm mm
718 mm
759 mm 86 603 mm
mm BEHIND FRAME
18 | English
E SER IES O VENS
B U I L T- I N O V E N S
76 cm E Series Ovens
C ONT EMPO R ARY SINGL E OVE N
32 mm 244
mm
76 mm
225
mm
CONDUIT
708 CHANNEL 687
mm mm
718 mm
759 mm 76 603 mm
mm BEHIND FRAME
559
OPEN OVEN DOOR mm
32 mm 244
mm
76 mm
225
mm
CONDUIT
CHANNEL
1280 1257
mm mm
718 mm
759 mm 76 603 mm
mm BEHIND FRAME
subzero-wolf.com.au | 19
E SER IES O VENS
B U I L T- I N O V E N S
Planning Information
The E series oven can be installed in a standard or flush ELEC TR I C AL
inset application. If a cooktop is being installed above an
Installation must comply with all applicable electrical codes
oven, a minimum of 6 mm is required between units. Loca-
and be properly grounded (earthed).
tion of the electrical supply within the oven opening may
require additional cabinet depth. Locate the electrical supply flush with the back wall and
within the shaded area shown in the illustration for your
Finish the edges of the opening. They may be visible when
specific installation on the following pages. For ease of
the door is open.
installation, the electrical supply for the oven can be placed
For standard installations, face trim will overlap stiles and in an adjacent cabinet within reach of the conduit. The 76 cm
rails. Refer to the chart below. units are supplied with terminal box convertible to single or
3-phase.
For flush inset installations, a minimum 3 mm reveal is
required on all sides. To ensure consistent reveals, each The wiring diagram covering the control circuit is provided
corner of the opening must be exactly 90°. with the oven.
20 | English
E SER IES O VENS
B U I L T- I N O V E N S
60 cm E Series Oven
S TANDAR D INS TAL L ATION
572 mm
OPENING
DEPTH
TOP VIEW
E E
H
OPENING
HEIGHT
562 mm
OPENING WIDTH
OPENING HEIGHT H
subzero-wolf.com.au | 21
E SER IES O VENS
B U I L T- I N O V E N S
610 mm
OPENING
DEPTH
TOP VIEW
127 E
mm
102
mm
692 mm
OPENING 724 mm
HEIGHT OPENING WIDTH
NOTE: Location of electrical supply within opening may require additional cabinet depth.
Dashed line represents profile of unit.
22 | English
E SER IES O VENS
B U I L T- I N O V E N S
76 cm E Series Double Oven
S TANDAR D INS TAL L ATION
610 mm
OPENING
DEPTH
TOP VIEW
127 E
mm
102
mm
1264 mm
OPENING 724 mm
HEIGHT OPENING WIDTH
E
432 mm
TYPICAL
NOTE: Location of electrical supply within opening may require additional cabinet depth.
Dashed line represents profile of unit.
subzero-wolf.com.au | 23
E SER IES O VENS
B U I L T- I N O V E N S
60 cm E Series Oven
F LUS H INS ET INSTAL L ATION
584 mm
FLUSH
INSET
22 mm DEPTH
FINISHED
CLEATS*
TOP VIEW
E 10 mm E
H
FLUSH INSET
HEIGHT**
24 mm
6 mm
603 mm
FLUSH INSET WIDTH**
24 | English
E SER IES O VENS
B U I L T- I N O V E N S
76 cm E Series Single Oven
F LUS H INS ET INSTAL L ATION
25 mm 635 mm
OR FLUSH INSET
32 mm** DEPTH
FINISHED
CLEATS*
TOP VIEW
765 mm
FLUSH INSET WIDTH***
127 E
19 mm mm
102
mm
714 mm
FLUSH INSET
HEIGHT***
20 mm E
6 mm E
981 mm
TYPICAL
subzero-wolf.com.au | 25
E SER IES O VENS
B U I L T- I N O V E N S
25 mm 635 mm
OR FLUSH INSET
32 mm** DEPTH
FINISHED
CLEATS*
TOP VIEW
765 mm
FLUSH INSET WIDTH***
127 E
19 mm mm
102
mm
1289 mm
FLUSH INSET
HEIGHT***
20mm E
6 mm E
432 mm
TYPICAL
26 | English
C ONVECT IO N S TE AM OVE NS
B U I L T- I N O V E N S
Convection Steam Ovens
The legacy of the “combination oven” goes back decades, C O N VEC TI O N S TEAM O V EN S
to innovative chefs in America and Europe who embraced TRAN SITION A L
the combination of air movement with superheated steam to
achieve superior results—from breads and roasts to delicate
fishes, seafood and vegetables. Wolf combines the benefits
of convection and steam for the most innovative steam oven
on the market today. Virtually any dish prepared in a con- ICBCSO24TE/S/TH ICBCSO30TM/S/TH ICBCSO30TE/S/TH
ventional oven, range or microwave can also be prepared
in the Wolf convection steam oven—with more control. Two P ROFESSION A L
widths and three distinct styles compliment the look of Wolf
ovens, ranges and cooktops. Convection steam ovens can
be installed in a standard or flush inset application.
ICBCSO30PM/S/PH ICBCSO30PE/S/PH
C ON TEMP ORARY
subzero-wolf.com.au | 27
C ONVECT IO N S TE AM OVE NS
B U I L T- I N O V E N S
22 mm 538 mm
454 446
mm mm
W 64 546 mm
WIDTH mm BEHIND FRAME
360
OPEN OVEN DOOR mm
WIDTH W
60 cm Transitional 597 mm
76 cm Transitional 759 mm
P R O F ES S IO NAL
22 mm 538 mm
454 446
mm mm
759 mm 83 546 mm
mm BEHIND FRAME
360
OPEN OVEN DOOR mm
C O NT EMPO R ARY
22 mm 538 mm
454 446
mm mm
759 mm 64 546 mm
mm BEHIND FRAME
360
OPEN OVEN DOOR mm
28 | English
C ONVECT IO N S TE AM OVE NS
B U I L T- I N O V E N S
Planning Information
The convection steam oven can be installed in a standard ELEC TR I C A L
or flush inset application. The electrical supply for the oven
Installation must comply with all applicable electrical codes
must be located in an adjacent cabinet.
and be properly grounded (earthed).
Finish the edges of the opening. They may be visible when
Locate the electrical supply as shown in the illustrations
the door is open.
on the following pages. A separate circuit, servicing only
For standard installations, face trim will overlap stiles and this appliance is required. A ground fault circuit interrupter
rails. Refer to the chart below. (GFCI) is not recommended and may cause interruption of
operation.
For flush inset installations, a minimum 3 mm reveal is
required on all sides. To ensure consistent reveals, each Performance may be compromised if the electrical supply is
corner of the opening must be exactly 90°. less than 220 volts.
subzero-wolf.com.au | 29
C ONVECT IO N S TE AM OVE NS
B U I L T- I N O V E N S
548 mm
OPENING
DEPTH
TOP VIEW
E E
448 mm
OPENING
HEIGHT
W
OPENING WIDTH
OPENING WIDTH W
60 cm Model 562 mm
76 cm Model 562 mm
30 | English
C ONVECT IO N S TE AM OVE NS
B U I L T- I N O V E N S
Convection Steam Oven
F LUS H INS ET INSTAL L ATION
584 mm
FLUSH INSET
25 mm DEPTH
FINISHED
CLEATS*
TOP VIEW
E E
8 mm
460 mm
FLUSH INSET
A
HEIGHT**
3 mm
W
FLUSH INSET WIDTH**
60 cm Model 603 mm 21 mm
76 cm Model 765 mm 102 mm
subzero-wolf.com.au | 31
M ICR O WAVE O V E NS
B U I L T- I N O V E N S
Microwave Ovens
As true cooking instruments, Wolf microwave ovens have D R O P D O W N D O O R M I C R O WAVES
features that make fast meals better meals. New drop down TRAN SITION A L
door microwaves feature a door that hinges at the bottom.
Drop down door microwaves are designed to match Wolf
transitional, professional and contemporary products.
Microwave ovens can be installed in a standard or flush
inset application. ICBMDD24TE/S/TH ICBMDD30TM/S/TH ICBMDD30TE/S/TH
P ROFESSION A L
ICBMDD30PM/S/PH ICBMDD30PE/S/PH
C ON TEMP ORARY
ICBMDD30CM/B/TH
32 | English
M ICR O WAVE O V E NS
B U I L T- I N O V E N S
Drop Down Door Microwave Ovens
T R ANS IT IO NAL
22 mm 538 mm
454 446
mm mm
W 64 546 mm
WIDTH mm BEHIND FRAME
360
OPEN OVEN DOOR mm
WIDTH W
60 cm Model 597 mm
76 cm Model 759 mm
P RO F ES S IO NAL
22 mm 538 mm
454 446
mm mm
759 mm 83 546 mm
mm BEHIND FRAME
360
OPEN OVEN DOOR mm
22 mm 538 mm
454 446
mm mm
759 mm 64 546 mm
mm BEHIND FRAME
360
OPEN OVEN DOOR mm
subzero-wolf.com.au | 33
M ICR O WAVE O V E NS
B U I L T- I N O V E N S
34 | English
M ICR O WAVE O V E NS
B U I L T- I N O V E N S
Drop Down Door Microwave Oven
S TANDAR D INS TAL L ATION
548 mm
OPENING
DEPTH
TOP VIEW
E
448 mm
OPENING
HEIGHT
W
OPENING WIDTH
OPENING WIDTH W
60 cm Model 562 mm
76 cm Model 562 mm
subzero-wolf.com.au | 35
M ICR O WAVE O V E NS
B U I L T- I N O V E N S
584 mm
FLUSH INSET
25 mm DEPTH
FINISHED
CLEATS*
TOP VIEW
E 8 mm
460 mm
FLUSH INSET
A
HEIGHT**
3 mm
W
FLUSH INSET WIDTH**
60 cm Model 603 mm 21 mm
76 cm Model 765 mm 102 mm
36 | English
WAR MING DR AWE RS
B U I L T- I N O V E N S
Warming Drawers
Wolf warming drawers are designed to take care of pre- WA R M I N G D R AW ER FR O N TS
pared foods until it’s time to serve them. You can adjust the M | E SERIES
temperature, keeping moist foods moist and crisp foods
crisp. Warming drawers are ideal for proofing dough. Drawer
fronts are available to match the look of Wolf ovens and
sealed burner rangetops. The integrated drawer front allows TRANSITIONAL PROFESSIONAL CONTEMPORARY
CUSTOM PANEL
subzero-wolf.com.au | 37
WAR MING DR AWE RS
B U I L T- I N O V E N S
Warming Drawers
D RAWER F R O NT OPTIONS D I MEN S I O N S
DRAWER FRONT
MOD EL W
76 cm Drawer Front 759 mm
91 cm Drawer Front 911 mm
M SERIES A B
Transitional | Professional 22 mm 83 mm
Contemporary 25 mm 86 mm
E SERIES A B
Transitional | Professional 29 mm 89 mm
Professional (51 mm thick) 54 mm 114 mm
Contemporary 35 mm 95 mm
38 | English
WAR MING DR AWE RS
B U I L T- I N O V E N S
Planning Information
The warming drawer must be installed with a Wolf drawer ELEC TR I C AL
front, available through an authorized Wolf dealer. Specific
Installation must comply with all applicable electrical codes
installation instructions are included with the drawer front.
and be properly grounded (earthed). A 10A power is
The warming drawer can be installed in a standard or flush needed.
inset application.
Locate the electrical supply flush with the back wall and
For a standard installation, the drawer collar and front panel within the shaded area shown in the illustrations on the
sit proud of the cabinet face frame. A recessed installation following pages. For ease of installation, the electrical
requires the cabinetry be recessed by 5 mm so the collar is supply for the warming drawer can be placed in an adjacent
flush with the cabinet face frame but the drawer front will cabinet within reach of the power cord.
sit proud. A flush inset installation requires the drawer collar
and front panel be recessed to be flush with surrounding ELECTRICAL
Electrical SupplyREQUIREMENTS 220-240 V AC, 50/60 Hz
cabinetry. Refer to illustrations on the following pages for Service 850 W
minimum cabinet dimensions for your specific installation.
Receptacle grounding-type (earthed)
Finish the edges of the opening. They may be visible when Power Cord .9 m
the drawer is open.
For standard installations, face trim will overlap stiles and
rails. Refer to the chart below.
For flush inset installations, a minimum 3 mm reveal is
required on all sides. To ensure consistent reveals, each
corner of the opening must be exactly 90°.
INSTALLATION REQUIREMENTS
B A S E S U P P O RT MIN
Warming Drawer 90 kg
TRIM OVERLAP
Top, Bottom and Sides 16 mm
subzero-wolf.com.au | 39
WAR MING DR AWE RS
B U I L T- I N O V E N S
Warming Drawer
S TANDAR D INS TAL L ATION
584 mm
OPENING
DEPTH
TOP VIEW
ANTI-TIP BLOCK
232 mm
OPENING
HEIGHT E
727 mm
OPENING WIDTH
NOTE: Location of electrical supply within opening may require additional cabinet depth.
40 | English
WAR MING DR AWE RS
B U I L T- I N O V E N S
Warming Drawer
F LUS H INS ET INSTAL L ATION
A
DRAWER 610 mm
FRONT FLUSH INSET
DEPTH DEPTH
FINISHED
CLEATS*
TOP VIEW
ANTI-TIP BLOCK
270 mm 19 mm
FLUSH INSET
HEIGHT** 19 mm E
19 mm E
765 mm
FLUSH INSET WIDTH**
Transitional | Professional 22 mm 29 mm
Professional (51 mm thick) NA 54 mm
Contemporary 25 mm 35 mm
Custom front panel depth is dependent on panel thickness.
subzero-wolf.com.au | 41
Wolf Appliance International Limited Warranty
FOR RESIDENTIAL USE
For two years from the date of original installation, this Wolf Appliance product warranty covers all parts
and labor to repair or replace, under normal residential use, any part of the product that proves to be
defective in materials or workmanship. All service provided by Wolf Appliance under the above warranty
must be performed by Wolf factory certified service, unless otherwise specified by Wolf Appliance, Inc.
Service will be provided during normal business hours.
For five years from the date of original installation, Wolf Appliance will repair or replace the following parts
that prove to be defective in materials or workmanship: gas burners (excluding appearance), electric
heating elements, blower motors (ventilation hoods), electronic control boards, magnetron tubes and
induction generators. The part(s) will be repaired or replaced, free of charge, with the owner paying for
all other costs including labor. All service provided by Wolf Appliance under the above warranty must be
performed by Wolf factory certified service, unless otherwise specified by Wolf Appliance, Inc. Service will
be provided during normal business hours.
For more information regarding your Wolf product warranty, contact your authorized Wolf dealer. Warran-
ties must comply to all country, state, city, local and or ordinance.
*Stainless steel (doors, panels, handles, product frames and interior surfaces) are covered by a limited
60-day parts and labor warranty for cosmetic defects.
Wolf Appliance International Outdoor Limited Warranty*
FOR RESIDENTIAL USE
For one year from the date of original installation, this Wolf Appliance product warranty covers all parts and
labor to repair or replace, under normal residential use, any part of the product that proves to be defective
in materials or workmanship. All service provided by Wolf Appliance under the above warranty must be
performed by Wolf factory certified service, unless otherwise specified by Wolf Appliance, Inc. Service will
be provided during normal business hours.
For five years from the date of original installation, Wolf Appliance will repair or replace the following parts
that prove to be defective in materials or workmanship: stainless steel briquette trays, gas valves, drip
pans, electronic control boards and electric heating elements. If the owner uses Wolf factory certified
service, the service provider will repair or replace these parts with the owner paying for all other costs,
including labor. If the owner uses non-certified service, the owner must contact Wolf Appliance, Inc. (using
the information below) to receive repaired or replacement parts. Wolf Appliance will not reimburse the
owner for parts purchased from non-certified service or other sources.
For more information regarding your Wolf product warranty, contact your authorized Wolf dealer. Warran-
ties must comply to all country, state, city, local and or ordinance.
*Product must be approved for outdoor use, designated by model and serial number.
**Stainless steel (doors, panels, handles, product frames and interior surfaces) are covered by a limited
60-day parts and labor warranty for cosmetic defects.
subzero-wolf.com.au