This document provides provisional standards for various materials used in construction projects including aggregates, asphalts, concretes, pipes, and other related products. It lists over 80 individual standards giving the code page number, title, and publication date for each standard. The standards cover materials for hydraulic cement concrete, bituminous paving mixtures, masonry mortar, asphalt binders and mixtures, pipes, culverts, manholes, drainage, and other construction applications.
This document provides provisional standards for various materials used in construction projects including aggregates, asphalts, concretes, pipes, and other related products. It lists over 80 individual standards giving the code page number, title, and publication date for each standard. The standards cover materials for hydraulic cement concrete, bituminous paving mixtures, masonry mortar, asphalt binders and mixtures, pipes, culverts, manholes, drainage, and other construction applications.
This document provides provisional standards for various materials used in construction projects including aggregates, asphalts, concretes, pipes, and other related products. It lists over 80 individual standards giving the code page number, title, and publication date for each standard. The standards cover materials for hydraulic cement concrete, bituminous paving mixtures, masonry mortar, asphalt binders and mixtures, pipes, culverts, manholes, drainage, and other construction applications.
M 6-13 3 Fine Aggregate for Hydraulic Cement Concrete M 17-11 9 Mineral Filler for Bituminous Paving Mixtures M 43-05 15 Sizes of Aggregate for Road and Bridge Construction M 45-15 19 Aggregate for Masonry Mortar M 80-13 23 Coarse Aggregate for Hydraulic Cement Concrete M 195-11 28 Lightweight Aggregates for Structural Concrete M 327 35 Processing Additions for Use in the Manufacture of Hydraulic Cements M 81-92 44 Cutback Asphalt (Rapid-Curing Type) M 82-75 47 Cutback Asphalt (Medium-Curing Type) M 140-13 50 Emulsified Asphalt Requirements for Mixing Plants for Hot-Mixed, Hot Laid Bituminous M 156-13 52 Paving Mixtures M 208-01 60 Cationic Emulsified Asphalt M 226-80 64 Viscosity-Graded Asphalt Cement M 303-89 68 Lime for Asphalt Mixtures M 316-13 72 Polymer-Modified Cationic Emulsified Asphalt M 320-10 75 Performance-Graded Asphalt Binder M 323-13 83 Superpave Volumetric Mix Design M 325-08 96 Stone Matrix Asphalt (SMA) Performance-Graded Asphalt Binder Using Multiple Stress M 332-14 102 Creep Recovery (MSCR) Test R 5-13 110 Selection and Use of Emulsified Asphalts R 15-00 112 Asphalt Additives and Modifiers R 26-01 120 Certifying Suppliers of Performance-Graded Asphalt Binders R 28-12 131 Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV) R 29-15 142 Grading or Verifying the Performance Grade (PG) of an Asphalt Binder R 30-02 148 Mixture Conditioning of Hot Mix Asphalt (HMA) R 35-15 153 Superpave Volumetric Design for Asphalt Mixtures R 46-08 182 Designing Stone Matrix Asphalt (SMA) R 47-14 195 Reducing Samples of Hot Mix Asphalt (HMA) to Testing Size Determination of Low-Temperature Performance Grade (PG) of Asphalt R 49-09 203 Binders Recovery of Asphalt Binder from R 59-11 222 Solution by Abson Method Developing Dynamic Modulus R 62-13 232 Master Curves for Asphalt Mixtures R 66-15 241 Sampling Asphalt Materials R 67-15 249 Sampling Asphalt Mixtures after Compaction (Obtaining Cores) R 68-15 253 Preparation of Asphalt Mixtures by Means of the Marshall Apparatus M 36 260 Corrugated Steel Pipe, Metallic-Coated, for Sewers and Drains M 86-15 282 Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, M 167-14 291 Pipe-Arches, and Arches M 170-15 305 Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe M 170-15 328 Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe [Metric] M 175-05 352 Perforated Concrete Pipe M 176-07 357 Porous Concrete Pipe
ENG. ABBAS HAMZA
0547209959 - 0533217325 ENG.ABBASS@OUTLOOK.COM M 178-07 365 Concrete Drain Tile M 190-04 377 Bituminous-Coated Corrugated Metal Culvert Pipe and Pipe-Arches M 196-92 384 Corrugated Aluminum Pipe for Sewers and Drains M 197-06 400 Aluminum Alloy Sheet for Corrugated Aluminum Pipe M 199-14 406 Precast Reinforced Concrete Manhole Sections M 206-15 424 Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe M 207-15 439 Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe Steel Sheet, Zinc-Coated (Galvanized), for Corrugated M 218-03 460 Steel Pipe Corrugated Aluminum Alloy Structural Plate M 219-92 468 for Field-Bolted Pipe, Pipe-Arches, and Arches M 242 476 Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe Field-Applied Coating of Corrugated Metal Structural Plate M 243-96 490 for Pipe, Pipe-Arches, and Arches M 245-00 493 Corrugated Steel Pipe, Polymer- Precoated, for Sewers and Drains Steel Sheet, Metallic-Coated and Polymer-Precoated, for M 246-15 511 Corrugated Steel Pipe M 252-09 519 Corrugated Polyethylene Drainage Pipe Precast Reinforced Concrete Box Sections for Culverts, M 259-11 530 Storm Drains, and Sewers Precast Reinforced Concrete Box Sections for Culverts, Storm M 259-11 558 Drains, and Sewers [Metric] M 262-11 588 Concrete Pipe and Related Products Precast Reinforced Concrete Box Sections for Culverts, M 273-11 596 Storm Drains, and Sewers with Less Than 2 ft of Cover Subjected to Highway Loadings Precast Reinforced Concrete Box Sections for Culverts, M 273-11 611 Storm Drains, and Sewers with Less Than 2 ft of Cover Subjected to Highway Loadings M 274-87 626 Steel Sheet, Aluminum-Coated (Type 2), for Corrugated Steel Pipe M 278-15 633 Class PS46 Poly(Vinyl Chloride) (PVC) Pipe M 289-91 644 Aluminum-Zinc Alloy Coated Sheet Steel for Corrugated Steel Pipe Corrugated Polyethylene Pipe, 300- to 1500-mm (12- to 60-in.) M 294-15 651 Diameter Poly(Vinyl Chloride) (PVC) Profile M 304 668 Wall Drain Pipe and Fittings Based on Controlled Inside Diameter M 306 678 Drainage, Sewer, Utility, and Related Castings Polyethylene (PE) Liner Pipe, 300- M 326-08 684 to 1600-mm Diameter, Based on Controlled Outside Diameter M 330-13 696 Polypropylene Pipe, 300- to 1500-mm (12- to 60-in.) Diameter
R 63-13 710 for Non-Pressure Applications Used for the Protection of Power and Telecommunications Cables
M 154-12 726 Air-Entraining Admixtures for Concrete
M 157 728 Ready-Mixed Concrete M 182 742 Burlap Cloth Made from Jute or Kenaf and Cotton Mats M 194-13 746 Chemical Admixtures for Concrete ENG. ABBAS HAMZA 0547209959 - 0533217325 ENG.ABBASS@OUTLOOK.COM M 205-11 748 Molds for Forming Concrete Test Cylinders Vertically Use of Apparatus for the Determination of Length Change M 210-14 750 of Hardened Cement Paste, Mortar, and Concrete M 224-91 759 Use of Protective Sealers for Portland Cement Concrete Boiled Linseed Oil Mixture for Treatment of Portland M 233-86 766 Cement Concrete M 241 769 Concrete Made by Volumetric Batching and Continuous Mixing M 295-11 771 Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete M 302-15 777 Slag Cement for Use in Concrete and Mortars R 39 787 Making and Curing Concrete Test Specimens in the Laboratory R 60-12 801 Sampling Freshly Mixed Concrete Sampling and Fabrication of 50-mm (2-in.) Cube Specimens R 64 806 Using Grout (Non-Shrink) or Mortar R 23 811 Chemical, Biological, and Physical Analysis of Water R 24 819 Collection and Preservation of Water Samples M 180 828 Corrugated Sheet Steel Beams for Highway Guardrail M 181 480 Chain-Link Fence M 269 858 Turnbuckles and Shackles M 279 885 Metallic-Coated, Steel Woven Wire Fence Fabric M 280 896 Metallic-Coated (Carbon) Steel Barbed Wire M 281 906 Steel Fence Posts and M 85 914 Portland Cement M 240 928 Blended Hydraulic Cement M 307 952 Silica Fume Used in Cementitious Mixtures High-Reactivity Pozzolans M 321 965 for Use in Hydraulic-Cement Concrete, Mortar, and Grout M 33 971 Preformed Expansion Joint Filler for Concrete (Bituminous Type) Preformed Sponge Rubber and Cork Expansion Joint Fillers for M 153 977 Concrete Paving and Structural Construction Preformed Expansion Joint Fillers for Concrete Paving and Structural M 213 981 Construction (Nonextruding and Resilient Bituminous Types) M 251 985 Plain and Laminated Elastomeric Bridge Bearings M 297 1002 Preformed Polychloroprene Elastomeric Joint Seals for Bridges Geosynthetic Reinforcement of the Aggregate Base Course of R 50 1004 Flexible Pavement Structures M 102 1009 Steel Forgings, Carbon and Alloy, for General Industrial Use M 103 1022 Steel Castings, Carbon, for General Application M 105 1029 Gray Iron Castings M 111 1040 Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products Castings, Iron-Chromium, Iron- Chromium-Nickel, Corrosion M 163 1054 Resistant, for General Application M 169 1066 Steel Bars, Carbon and Alloy, Cold-Finished M 202 1078 Steel Sheet Piling M 227 1081 Steel Bars, Carbon, Merchant Quality, Mechanical Properties M 232 1087 Zinc Coating (Hot-Dip) on Iron and Steel Hardware M 255 1095 Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties M 270 1103 Structural Steel for Bridges M 277 1117 Wire Rope and Sockets for Movable Bridges M 285 1129 Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service
ENG. ABBAS HAMZA
0547209959 - 0533217325 ENG.ABBASS@OUTLOOK.COM Carbon and Alloy Steel Nuts for M 292 1139 Bolts for High-Pressure or High- Temperature Service, or Both M 314 1159 Steel Anchor Bolts M 333 1169 Detectable Warning Surfaces M 143 1172 Sodium Chloride M 144 1178 Calcium Chloride M 230 1183 Expanded and Extruded Foam Board (Polystyrene) M 235 1187 Epoxy Resin Adhesives R8 1198 Evaluation of Transportation- Related Earthborne Vibrations Definition of Terms Related to Quality and Statistics R 10 1212 as Used in Highway Construction R 16 1240 Regulatory Information for Chemicals Used in AASHTO Tests R 25 1250 Technician Training and Qualification Programs R 34 1266 Evaluating Deicing Chemicals R 44 1268 Independent Assurance (IA) Programs Epoxy Resin Adhesives for Bonding Traffic Markers to M 237 1278 Hardened Portland Cement and Asphalt Concrete M 247 1287 Glass Beads Used in Pavement Markings M 248 1291 Ready-Mixed White and Yellow Traffic Paints White and Yellow Reflective M 249 1298 Thermoplastic Striping Material (Solid Form) Retroreflective Sheeting for Flat and Vertical Traffic M 268 1304 Control Applications M 290 1317 Acrylic Prismatic Reflectors and Embossed Aluminum Frames for Signs M 300 1323 Inorganic Zinc-Rich Primer R 31 1331 Evaluation of Protective Coating Systems for Structural Steel M 328 1352 Inertial Profiler M 331 1362 Smoothness of Pavement in Weigh-in-Motion (WIM) Systems R 36 1373 Evaluating Faulting of Concrete Pavements R 37 1385 Application of Ground Penetrating Radar (GPR) to Highways R 40 1398 Measuring Pavement Profile Using a Rod and Level R 41 1405 Measuring Pavement Profile Using a Dipstick R 43 1413 Quantifying Roughness of Pavements R 48 1419 Determining Rut Depth in Pavements Accepting Pavement Ride Quality When Measured Using Inertial R 54 1425 Profiling Systems R 55 1433 Quantifying Cracks in Asphalt Pavement Surfaces R 56 1439 Certification of Inertial Profiling Systems R 57 1449 Operating Inertial Profiling Systems R9 1458 Acceptance Sampling Plans for Highway Construction Establishing and Implementing a Quality Management System for R 18 1513 Construction Materials Testing Laboratories R 20 1542 Procedures for Measuring Highway Noise R 38 1544 Quality Assurance of Standard Manufactured Materials R 42 1565 Developing a Quality Assurance Plan for Hot Mix Asphalt (HMA) Establishing Requirements for Equipment Calibrations, R 61 1608 Standardizations, and Checks Evaluating the Engineering and R 65 1624 Environmental Suitability of Recycled Materials M 30 1648 Metallic-Coated Steel Wire Rope and Fittings for Highway Guardrail ENG. ABBAS HAMZA 0547209959 - 0533217325 ENG.ABBASS@OUTLOOK.COM M 31 1654 Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement M 32 1665 Steel Wire, Plain, for Concrete Reinforcement M 54 1673 Welded Deformed Steel Bar Mats for Concrete Reinforcement M 55 1678 Steel Welded Wire Reinforcement, Plain, for Concrete M 203 1688 Steel Strand, Uncoated Seven-Wire For Concrete Reinforcement M 204 1697 Uncoated Stress-Relieved Steel Wire for Prestressed Concrete M 221 1704 Steel Welded Wire Reinforcement, Deformed, for Concrete M 225 1713 Steel Wire, Deformed, for Concrete Reinforcement M 254 1723 Corrosion-Resistant Coated Dowel Bars M 275 1728 Uncoated High-Strength Steel Bars for Prestressing Concrete M 322 1737 Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement Stainless Clad Deformed and Plain M 329 1746 Round Steel Bars for Concrete Reinforcement M 57 1759 Materials for Embankments and Subgrades Classification of Soils and Soil-Aggregate M 145 1763 Mixtures for Highway Construction Purposes M 146 1771 Terms Relating to Subgrade, Soil-Aggregate, and Fill Materials Materials for Aggregate and Soil-Aggregate Subbase, Base, M 147 1774 and Surface Courses M 216 1778 Lime for Soil Stabilization M 288 1782 Geotextile Specification for Highway Applications M 318 1804 Glass Cullet Use for Soil-Aggregate Base Course Reclaimed Concrete Aggregate for Unbound M 319 1810 Soil-Aggregate Base Course R 13 1819 Conducting Geotechnical Subsurface Investigations Drilling for Subsurface Investigations—Unexpectedly R 21 1833 Encountering Suspected Hazardous Material R 22 1836 Decommissioning Geotechnical Exploratory Boreholes R 27 1844 Assessment of Corrosion of Steel Piling for Non-Marine Applications R 51 1858 Compost for Erosion/Sediment Control (Filter Berms and Filter Socks) R 52 1866 Compost for Erosion/Sediment Control (Compost Blankets) Dry Preparation of Disturbed R 58 1873 Soil and Soil-Aggregate Samples for Test R 69 1877 Determination of Long-Term Strength for Geosynthetic Reinforcement M 92 1923 Wire-Cloth Sieves for Testing Purposes M 152 1926 Flow Table for Use in Tests of Hydraulic Cement Mixing Rooms, Moist Cabinets, Moist Rooms, and Water Storage M 201 1932 Tanks Used in the Testing of Hydraulic Cements and Concretes M 231 1938 Weighing Devices Used in the Testing of Materials M 261 1944 Rib-Tread Standard Tire for Special-Purpose Pavement Frictional-Property Tests Smooth-Tread Standard Tire for Special-Purpose Pavement M 286 1950 Frictional-Property Tests Calibrating the Load Cell and Deflection Sensors for a Falling R 32 1956 Weight Deflectometer Calibrating the Reference Load Cell Used for Reference R 33 1970 Calibrations for a Falling Weight Deflectometer Installing, Monitoring, and Processing Data of the Traveling R 45 1977 Type Slope Inclinometer M 133 1987 Preservatives and Pressure Treatment Processes for Timber M 168 1994 Wood Products ENG. ABBAS HAMZA 0547209959 - 0533217325 ENG.ABBASS@OUTLOOK.COM PART 1 SPECIFICATION CODE PAGE NO. TITLE T2 2056 Sampling of Aggregates T 11 2058 Materials Finer Than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing T 19 2064 Bulk Density (“Unit Weight”) and Voids in Aggregate T 21 2073 Organic Impurities in Fine Aggregates for Concrete T 27 2077 Sieve Analysis of Fine and Coarse Aggregates T 30 2086 Mechanical Analysis of Extracted Aggregate T 37 2092 Sieve Analysis of Mineral Filler for Hot Mix Asphalt (HMA) T 71 2096 Effect of Organic Impurities in Fine Aggregate on Strength of Mortar T 84 2103 Specific Gravity and Absorption of Fine Aggregate T 85 2113 Specific Gravity and Absorption of Coarse Aggregate Resistance to Degradation of T 96 2123 Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine T 103 2126 Soundness of Aggregates by Freezing and Thawing T 104 2133 Soundness of Aggregate by Use of Sodium Sulfate or Magnesium Sulfate T 112 2143 Clay Lumps and Friable Particles in Aggregate T 113 2147 Lightweight Pieces in Aggregate T 210 2153 Aggregate Durability Index T 248 2168 Reducing Samples of Aggregate to Testing Size T 255 2175 Total Evaporable Moisture Content of Aggregate by Drying T 279 2181 Total Evaporable Moisture Content of Aggregate by Drying T 304 2190 Uncompacted Void Content of Fine Aggregate Uncompacted Void Content of Coarse Aggregate (As Influenced by Particle T 326 2199 Shape, Surface Texture, and Grading) Resistance of Coarse Aggregate to Degradation by Abrasion in T 327 2207 the Micro-Deval Apparatus The Qualitative Detection of Harmful Clays of the Smectite T 330 2216 Group in Aggregates Using Methylene Blue T 335 2221 Determining the Percentage of Fracture in Coarse Aggregate Specific Gravity and Absorption of Aggregate by Volumetric T 354 2226 Immersion Method T 44 2237 Solubility of Bituminous Materials T 48 2242 Flash and Fire Points by Cleveland Open Cup T 49 2247 Penetration of Bituminous Materials T 50 2250 Float Test for Bituminous Materials T 51 2252 Ductility of Asphalt Materials T 53 2254 Softening Point of Bitumen (Ring-and-Ball Apparatus) T 59 2258 Emulsified Asphalts T 72 2305 Saybolt Viscosity T 78 2317 Distillation of Cutback Asphalt Products Flash Point with Tag Open-Cup Apparatus for Use with Material T 79 2325 Having a Flash Point Less Than 93°C (200°F) T 102 2332 Spot Test of Asphaltic Materials T 110 2338 Moisture or Volatile Distillates in Hot Mix Asphalt (HMA) T 111 2348 Mineral Matter or Ash in Asphalt Materials
ENG. ABBAS HAMZA
0547209959 - 0533217325 ENG.ABBASS@OUTLOOK.COM Quantitative Extraction of Asphalt T 164 2351 Binder from Hot Mix Asphalt (HMA) Bulk Specific Gravity (Gmb) of Compacted Hot Mix Asphalt T 166 2373 (HMA) Using Saturated Surface-Dry Specimens T 167 2380 Compressive Strength of Hot Mix Asphalt T 168 2388 Sampling Bituminous Paving Mixtures T 179 2390 Effect of Heat and Air on Asphalt Materials (Thin-Film Oven Test) T 195 2396 Determining Degree of Particle Coating of Asphalt Mixtures T 201 2399 Kinematic Viscosity of Asphalts (Bitumens) T 202 2402 Viscosity of Asphalts by Vacuum Capillary Viscometer Theoretical Maximum Specific Gravity (Gmm) and Density of T 209 2405 Hot Mix Asphalt (HMA) T 228 2421 Specific Gravity of Semi-Solid Asphalt Materials Effect of Heat and Air on a MovingFilm of Asphalt Binder (Rolling T 240 2424 Thin-Film Oven Test) Resistance to Plastic Flow T 245 2436 of Asphalt Mixtures Using Marshall Apparatus Resistance to Deformation and Cohesion of Hot Mix Asphalt (HMA) T 246 2443 by Means of Hveem Apparatus Preparation of Test Specimens ofHot Mix Asphalt (HMA) by Means T 247 2454 of California Kneading Compactor T 269 2461 Percent Air Voids in Compacted Dense and Open Asphalt Mixtures Bulk Specific Gravity (Gmb) of Compacted Hot Mix Asphalt (HMA) T 275 2466 Using Paraffin-Coated Specimens T 283 2471 Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage T 287 2480 Asphalt Binder Content of Asphalt Mixtures by the Nuclear Method T 295 2491 Specific Gravity or API Gravity of Liquid Asphalts by Hydrometer Method T 300 2498 Force Ductility Test of Asphalt Materials T 301 2503 Elastic Recovery Test of Asphalt Materials by Means of a Ductilometer Polymer Content of Polymer-Modified Emulsified Asphalt T 302 2508 Residue and Asphalt Binders T 305 2514 Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) T 308 2520 by the Ignition Method T 309 2530 Temperature of Freshly Mixed Portland Cement Concrete Preparing and Determining the T 312 2534 Density of Asphalt Mixture Specimens by Means of the Superpave Gyratory Compactor Determining the Flexural Creep Stiffness of Asphalt T 313 2548 Binder Using the Bending Beam Rheometer (BBR) Determining the Fracture Properties of Asphalt Binder T 314 2570 in Direct Tension (DT) Determining the Rheological Properties of Asphalt Binder Using T 315 2588 a Dynamic Shear Rheometer (DSR) T 316 2621 Viscosity Determination of Asphalt Binder Using Rotational Viscometer T 319 2627 Quantitative Extraction and Recovery of Asphalt Binder from Asphalt Mixtures Determining the Permanent Shear Strain and Stiffness of Asphalt Mixtures T 320 2642 Using theSuperpave Shear Tester (SST) T 321 2655 Determining the Fatigue Life of Compacted Asphalt
ENG. ABBAS HAMZA
0547209959 - 0533217325 ENG.ABBASS@OUTLOOK.COM Determining the Creep Compliance and Strength of Hot Mix Asphalt T 322 2667 (HMA) Using the Indirect Tensile Test Device T 324 2679 Hamburg Wheel-Track Testing of Compacted Hot Mix Asphalt (HMA) T 329 2690 Moisture Content of Asphalt Mixtures by Oven Method Bulk Specific Gravity (Gmb) and Density of Compacted Hot Mix T 331 2694 Asphalt (HMA) Using Automatic Vacuum Sealing Method Determining Rutting Susceptibility of Hot Mix Asphalt (HMA) Using the T 340 2702 Asphalt Pavement Analyzer (APA) T 342 2717 Determining Dynamic Modulus of Hot Mix Asphalt (HMA) Density of In-Place Hot Mix Asphalt T 343 2735 (HMA) Pavement by Electronic Surface Contact Devices Evaluation of Superpave Gyratory Compactor (SGC) Internal Angle of T 344 2741 Gyration Using Simulated Loading Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder T 350 2749 Using a Dynamic Shear Rheometer (DSR) T 355 2756 In-Place Density of Asphalt Mixtures by Nuclear Methods T 241 2769 Helical Continuously Welded Seam Corrugated Steel Pipe T 249 2775 Helical Lock Seam Corrugated Pipe T 280 2780 Concrete Pipe, Manhole Sections, or Tile T 281 2802 Vitrified Clay Pipe T 341 2810 Determination of Compression Capacity for Profile Wall Plastic T 22 2818 Compressive Strength of Cylindrical Concrete Specimens T 23 2830 Making and Curing Concrete Test Specimens in the Field T 24 2840 Obtaining and Testing Drilled Cores and Sawed Beams of Concrete Flexural Strength of Concrete (Using Simple Beam with Third- T 97 2853 Point Loading) T 119 2860 Slump of Hydraulic Cement Concrete T 121 2867 Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete Compressive Strength of Concrete T 140 2875 Using Portions of Beams Broken in Flexure T 148 2881 Measuring Length of Drilled Concrete Cores T 152 2884 Air Content of Freshly Mixed Concrete by the Pressure Method T 155 2900 Water Retention by Liquid Membrane-Forming Curing Compounds for Concrete T 157 2909 Air-Entraining Admixtures for Concrete T 158 2918 Bleeding of Concrete T 160 2927 Length Change of Hardened Hydraulic Cement Mortar and Concrete T 161 2939 Resistance of Concrete to Rapid Freezing and Thawing T 177 2951 Flexural Strength of Concrete (Using Simple Beam with Center-Point Loading) T 178 2955 Portland Cement Content of Hardened Hydraulic-Cement Concrete T 196 2967 Air Content of Freshly Mixed Concrete by the Volumetric Method T 197 2978 Time of Setting of Concrete Mixtures by Penetration Resistance T 198 2990 Splitting Tensile Strength of Cylindrical Concrete Specimens T 231 2998 Capping Cylindrical Concrete Specimens T 253 3008 Coated Dowel Bars T 259 3015 Resistance of Concrete to Chloride Ion Penetration T 260 3019 Sampling and Testing for Chloride Ion in Concrete and Concrete Raw Materials T 276 3034 Measuring Early-Age Compression Strength and Projecting Later-Age Strength T 277 3045 Electrical Indication of Concrete’s Ability to Resist Chloride Ion Penetration T 285 3060 Bend Test for Bars for Concrete Reinforcement
ENG. ABBAS HAMZA
0547209959 - 0533217325 ENG.ABBASS@OUTLOOK.COM Accelerated Detection of Potentially Deleterious T 303 3063 Expansion of Mortar Bars Due to Alkali-Silica Reaction T 318 3070 Water Content of Freshly Mixed Concrete Using Microwave Oven Drying Estimating the Strength of Concrete in Transportation T 325 3076 Construction by Maturity Tests T 332 3083 Determining Chloride Ions in Concrete and Concrete Materials by Specific Ion Probe T 334 3097 Estimating the Cracking Tendency of Concrete T 336 3103 Coefficient of Thermal Expansion of Hydraulic Cement Concrete T 345 3113 Passing Ability of Self-Consolidating Concrete (SCC) by J-Ring T 347 3118 Slump Flow of Self-Consolidating Concrete (SCC) Air-Void Characteristics of Freshly Mixed Concrete T 348 3122 by Buoyancy Change T 349 3134 Filling Capacity of Self- Consolidating Concrete Using the Caisson Test T 351 3141 Visual Stability Index (VSI) of Self-Consolidating Concrete (SCC) Determining Formwork Pressure of Fresh Self-Consolidating Concrete T 352 3147 (SCC) Using Pressure Transducers Determining Air Content of T 356 3152 Hardened Portland Cement Concrete by High-Pressure Air Meter Predicting Chloride Penetration of Hydraulic Cement Concrete by the T 357 3164 Rapid Migration Procedure T 358 3179 Surface Resistivity Indication of Concrete’s Ability to Resist Chloride Ion Penetration T 98 3189 Fineness of Portland Cement by the Turbidimeter T 105 3203 Chemical Analysis of Hydraulic Cement Compressive Strength of Hydraulic Cement Mortar (Using 50-mm or T 106 3262 2-in. Cube Specimens) T 107 3280 Autoclave Expansion of Hydraulic Cement T 127 3286 Sampling and Amount of Testing of Hydraulic Cement Amount of Water Required for Normal Consistency of Hydraulic T 129 3297 Cement Paste T 131 3302 Time of Setting of Hydraulic Cement by Vicat Needle T 132 3314 Tensile Strength of Hydraulic Cement Mortars T 133 3323 Density of Hydraulic Cement T 137 3328 Air Content of Hydraulic T 153 3334 Fineness of Hydraulic Cement by Air Permeability Apparatus T 154 3350 Time of Setting of Hydraulic Cement Paste by Gillmore Needles Mechanical Mixing of Hydraulic Cement Pastes and Mortars of T 162 3357 Plastic Consistency T 185 3362 Early Stiffening of Hydraulic Cement (Mortar Method) T 186 3370 Early Stiffening of Hydraulic Cement (Paste Method) Evaluation by Freezing and Thawing of Air-Entraining Additions T 188 3377 to Hydraulic Cement T 192 3380 Fineness of Hydraulic Cement by the 45-μm (No. 325) Sieve Determining the Shear Strength at the Interface of Bonded Layers T 323 3385 of Portland Cement Concrete Particle Size Analysis of Hydraulic Cement and Related T 353 3391 Materials by Light Scattering T 42 3399 Preformed Expansion Joint Filler for Concrete Construction Mass [Weight] of Coating on Iron and Steel Articles with Zinc or T 65 3402 Zinc-Alloy Coatings ENG. ABBAS HAMZA 0547209959 - 0533217325 ENG.ABBASS@OUTLOOK.COM T 213 3411 Mass [Weight] of Coating on Aluminum-Coated Iron or Steel Articles T 243 3421 Sampling Procedure for Impact Testing of Structural Steel T 244 3429 Mechanical Testing of Steel Products T 337 3512 Non-Instrumental Determination of Metallic Zinc in Zinc-Rich Primers Analysis of Structural Steel Coatings for Hindered Amine T 338 3517 Light Stabilizer (HALS) T 339 3521 Analysis of Structural Steel Coatings for Isocyanate Content T 256 3525 Pavement Deflection Measurements Instrumental Photometric T 257 3537 Measurements of Retroreflective Materials and Retroreflective Devices T 143 3560 Sampling and Testing Calcium Chloride for Roads and Structural Applications T 237 3565 Testing Epoxy Resin Adhesive T 250 3579 Thermoplastic Traffic Line Material T 333 3592 Linear Coefficient of Shrinkage on Cure of Adhesive Systems T 346 3597 Glass Beads Used in Pavement Markings T 242 3604 Frictional Properties of Paved Surfaces Using a Full-Scale Tire T 278 3615 Surface Frictional Properties Using the British Pendulum Tester Calibrating a Wheel Force or T 282 3624 Torque Transducer Using a Calibration Platform (User Level) T 317 3632 Prediction of Asphalt-Bound Pavement Layer Temperatures T 88 3638 Particle Size Analysis of Soils T 89 3659 Determining the Liquid Limit of Soils T 90 3671 Determining the Plastic Limit and Plasticity Index of Soils Moisture-Density Relations of Soils Using a 2.5-kg (5.5-lb) Rammer and T 99 3677 a 305-mm (12-in.) Drop T 100 3691 Specific Gravity of Soils T 134 3699 Moisture-Density Relations of Soil-Cement Mixtures T 135 3708 Wetting-and-Drying Test of Compacted Soil-Cement Mixtures T 136 3716 Freezing-and-Thawing Tests of Compacted Soil-Cement Mixtures T 146 3724 Wet Preparation of Disturbed Soil Samples for Test Plastic Fines in Graded Aggregates T 176 3729 and Soils by Use of the Sand Equivalent Test Moisture-Density Relations of Soils Using a 4.54-kg (10-lb) Rammer and T 180 3743 a 457-mm (18-in.) Drop T 190 3757 Resistance R-Value and Expansion Pressure of Compacted Soils T 191 3771 Density of Soil In-Place by the Sand-Cone Method T 193 3778 The California Bearing Ratio T 194 3790 Determination of Organic Matter in Soils by Wet Combustion T 206 3795 Penetration Test and Split-Barrel Sampling of Soils T 207 3805 Thin-Walled Tube Sampling of Soils T 208 3812 Unconfined Compressive Strength of Cohesive Soil Determination of Cement Content in Cement-Treated Aggregate by T 211 3820 the Method of Titration T 215 3826 Permeability of Granular Soils (Constant Head) T 216 3841 One-Dimensional Consolidation Properties of Soils Determination of Moisture in Soils by Means of a Calcium Carbide Gas T 217 3862 Pressure Moisture Tester T 218 3868 Sampling Hydrated Lime T 219 3874 Testing Lime for Chemical Constituents and Particle Sizes T 220 3885 Determination of the Strength of Soil-Lime Mixtures ENG. ABBAS HAMZA 0547209959 - 0533217325 ENG.ABBASS@OUTLOOK.COM Repetitive Static Plate Load Tests of Soils and Flexible Pavement T 221 3898 Components for Use in Evaluation and Design of Airport and Highway Pavements Nonrepetitive Static Plate Load Test of Soils and Flexible T 222 3903 Pavement Components for Use in Evaluation and Design of Airport and Highway Pavements T 223 3913 Field Vane Shear Test in Cohesive Soil T 224 3919 Correction for Coarse Particles in the Soil Compaction Test T 225 3921 Diamond Core Drilling for Site Investigation Triaxial Compressive Strength of Undrained Rock Core T 226 3928 Specimens without Pore Pressure Measurements T 232 3935 Determination of Lime Content in Lime-Treated Soils by Titration T 233 3945 Density of Soil In-Place by Block, Chunk, or Core Sampling T 236 3951 Direct Shear Test of Soils under Consolidated Drained Conditions T 252 3960 Measurements of Pore Pressures in Soils T 258 3969 Determining Expansive Soils T 265 3982 Laboratory Determination of Moisture Content of Soils T 267 3986 Determination of Organic Content in Soils by Loss on Ignition T 273 3997 Soil Suction T 288 4008 Determining Minimum Laboratory Soil Resistivity T 289 4016 Determining pH of Soil for Use in Corrosion Testing T 290 4021 Determining Water-Soluble Sulfate Ion Content in Soil T 291 4031 Determining Water-Soluble Chloride Ion Content in Soil Unconsolidated, Undrained Compressive Strength of Cohesive T 296 4042 Soils in Triaxial Compression Consolidated, Undrained Triaxial Compression Test T 297 4053 on Cohesive Soils T 298 4055 High-Strain Dynamic Testing of Piles T 306 4069 Progressing Auger Borings for Geotechnical Explorations T 307 4075 Determining the Resilient Modulus of Soils and Aggregate Materials In-Place Density and Moisture T 310 4116 Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth) T 311 4130 Grain-Size Analysis of Granular Soil Materials Reclaimed Concrete Aggregate (RCA) for Use as Coarse Aggregate MP 16 4201 in Hydraulic Cement Concrete Determining Aggregate Source PP 64 4210 Shape Values from Digital Image Analysis Shape Properties Determining the Reactivity of Concrete Aggregates and Selecting PP 65 4226 Appropriate Measures for Preventing Deleterious Expansion in New Concrete Construction Determining Aggregate Shape Properties by Means of Digital TP 81 4252 Image Analysis TP 110 4267 Potential Alkali Reactivity of Aggregates and Effectiveness MP 23 4277 Reclaimed Asphalt Shingles for Use in Asphalt Mixtures MP 25 4281 Performance-Graded Bituminous Sealants MP 26 4289 Cotton Duck Fabric Bridge Bearings Preparation of Cylindrical Performance Test Specimens PP 60 4294 Using the Superpave Gyratory Compactor (SGC)
ENG. ABBAS HAMZA
0547209959 - 0533217325 ENG.ABBASS@OUTLOOK.COM Developing Dynamic Modulus Master Curves for Asphalt Mixtures PP 61 4306 Using the Asphalt Mixture Performance Tester (AMPT) PP 71 4315 Certifying Suppliers of Emulsified Asphalt Recovering Residue from Emulsified Asphalt Using Low- PP 72 4323 Temperature Evaporative Techniques Troubleshooting Asphalt Specimen Volumetric Differences between Superpave Gyratory Compactors PP 76 4328 (SGCs) Used in the Design and the Field Management of Superpave Mixtures Materials Selection and Mixture Design of Permeable Friction PP 77 4339 Courses (PFCs) Design Considerations When Using Reclaimed Asphalt Shingles (RAS) PP 78 4348 in Asphalt Mixtures Quantitative Determination of the Percentage of Lime in Hot Mix TP 72 4354 Asphalt (HMA) Determining Asphalt Binder Bond Strength by Means of the Binder TP 91 4359 Bond Strength (BBS) Test TP 78 4373 Detecting the Presence of Phosphorous in Asphalt Binder Determining the Dynamic Modulus and Flow Number for Asphalt TP 79 4377 Mixtures Using the Asphalt Mixture Performance Tester (AMPT) Bulk Specific Gravity (Gmb) of Compacted Bituminous Mixtures TP 82 4398 Using Water Displacement Measured by Pressure Sensor Apparent Viscosity of Hot-Poured Bituminous Crack Sealant Using TP 85 4402 Brookfield Rotational Viscometer RV Series Instrument Accelerated Aging of Bituminous Sealants and Fillers Using a TP 86 4411 Vacuum Oven Measuring Low-Temperature Flexural Creep Stiffness of TP 87 4418 Bituminous Sealants and Fillers by Bending Beam Rheometer (BBR) Evaluation of the Low-Temperature Tensile Property of Bituminous TP 88 4429 Sealants by Direct Tension Test TP 89 4440 Measuring Adhesion of Hot-Poured Crack Sealant Using Direct Measuring Interfacial Fracture Energy of Hot-Poured Crack TP 90 4454 Sealant Using a Blister Test TP 92 4469 Determining the Cracking Temperature of Asphalt Binder Estimating Fatigue Resistance of Asphalt Binders Using the TP 101 4483 Linear Amplitude Sweep TP 102 4492 Evaluation of Asphalt Release Agents Determining the Fracture Energy of Asphalt Mixtures TP 105 4500 Using the Semicircular Bend Geometry (SCB) Determining the Damage Characteristic Curve of Asphalt TP 107 4514 Mixtures from Direct Tension Cyclic Fatigue Tests TP 108 4562 Abrasion Loss of Asphalt Mixture Specimens TP 113 4567 Determination of Asphalt Binder Resistance to Ductile Failure TP 114 4577 Determining the Interlayer Shear Strength (ISS) of Asphalt Pavement Layers Determining the Quality of Tack Coat Adhesion to the TP 115 4584 Surface of an Asphalt Pavement in the Field or Laboratory Rutting Resistance of Asphalt Mixtures Using Incremental TP 116 4590 Repeated Load Permanent Deformation (iRLPD) TP 117 4598 Determination of the Voids of Dry Compacted Filler ENG. ABBAS HAMZA 0547209959 - 0533217325 ENG.ABBASS@OUTLOOK.COM MP 20 4606 Steel-Reinforced Polyethylene (PE) Ribbed Pipe, 300- to 1500-mm Fiber-Reinforced Polymer Composite Materials for Highway MP 22 4620 and Bridge Structures PP 63 4624 Pipe Joint Selection for Highway Culvert and Storm Drains PP 54 4642 Match Curing of Concrete Test Specimens Static Segregation of Hardened Self-Consolidating Concrete PP 58 4647 (SCC) Cylinders Nonlinear Impact Resonance Acoustic Spectroscopy (NIRAS) TP 109 4655 for Concrete Specimens with Damage from the Alkali-Silica Reaction (ASR) Characterization of the Air-Void System of Freshly Mixed Concrete TP 118 4662 by the Sequential Pressure Method TP 119 4674 Electrical Resistivity of a Concrete Cylinder Tested in a Uniaxial Resistance Test Uncoated, Corrosion-Resistant, Deformed and Plain Chromium MP 18 4686 Alloyed, Billet-Steel Bars for Concrete Reinforcement and Dowels TP 84 4717 Evaluation of Adhesive Anchors in Concrete under Sustained Loading Conditions PP 80 4735 Continuous Thermal Profile of Asphalt Mixture Construction PP 81 4742 Intelligent Compaction Technology for Embankment and Asphalt Pavement Applications TP 96 4766 Protective Sealers for Portland Cement Concrete TP 103 4800 Detectable Warning Systems MP 24 4854 Waterborne White and Yellow Traffic Paints Determination of Size and Roundness of Glass Beads Used PP 74 4861 in Traffic Markings by Means of Computerized Optical Method Determination of Heavy Metal Content of Glass Beads Using TP 106 4872 X-Ray Fluorescence (XRF) Measuring Retroreflectivity of TP 111 4877 Pavement Marking Materials Using a Mobile Retroreflectivity Unit Quantifying Cracks in Asphalt Pavement Surfaces from PP 67 4886 Collected Images Utilizing Automated Methods PP 68 4893 Collecting Images of Pavement Surfaces for Distress Detection Determining Pavement Deformation Parameters PP 69 4898 and Cross Slope from Collected Transverse Profiles PP 70 4904 Collecting the Transverse Pavement Profile Measurement of Tire/Pavement Noise Using the On-Board Sound TP 76 4909 Intensity (OBSI) Method PP 79 4925 High-Friction Surface Treatment for Asphalt and Concrete Pavements Determining the Influence of Road Surfaces on Vehicle TP 98 4937 Noise Using the Statistical Isolated Pass-By (SIP) Method Determining the Influence of Road Surfaces on Traffic Noise Using TP 99 4958 the Continuous-Flow Traffic Time-Integrated Method (CTIM) Quality Assurance, Job Site Quality Control, and Reapplication of PP 73 4979 Protective Sealers for Portland Cement Concrete PP 59 5000 Coal Combustion Fly Ash for Embankments PP 75 5007 Vacuum Drying Compacted Asphalt Specimens TP 100 5011 Deep Foundation Elements under Bidirectional Static Axial Compressive Load TP 104 5026 Rapid Axial Compressive Load Testing of Deep Foundation Units Determining In-Place Density and Moisture Content of Soil and Soil- TP 112 5042 Aggregate Using Complex Impedance Methodology