Professional Documents
Culture Documents
Slim Body With Automatic Sensitivity Setting: Compact Size With Advanced Sensing Technology
Slim Body With Automatic Sensitivity Setting: Compact Size With Advanced Sensing Technology
FX-7
Slim Body with Automatic Sensitivity Setting
SERIES
FZ-10
Technology
FX-10
FX-11A
CX-20
Marked
Conforming to EMC directive
CX-30
FX-7 amplifiers save space. sensing range of 600mm. just pressing buttons. Even if its power is
turned off, the EEPROM memory saves
Thru-beam mode your set sensitivity.
Only 100mm wide with 10 units
M4 standard • long sensing range fiber FT-B8 Press the “ON” button with an object
EX-10
600mm
Amplifier Built-in Type
14.5m
Press the “OFF” button with no object
Reflective mode
W10H31.5D59mm
M6 standard • long sensing range fiber FD-B8
EQ-30
160mm
Sensitivity : 8 Times Higher than Before Sensitivity Shift Stability Margin Indication
The FX-7 amplifier performs precise If either one of the Light state or the The number of blinks of the stability
EX-40
and accurate sensing 8 times greater Dark state is unstable but the other is indicator represents the stability margin
than a conventional model. It can be stationary, the threshold level can be that you have set the sensitivity.
used not only to detect the presence of shifted from the center between the set Number of blinks 0 1 2 3 4 5
an object, but also to discriminate ON and OFF levels to the stationary Margin (%) 15 30 45 60
color, or find a thin film overlap. side. Margin near by Under to to to to Over
RX
( threshold level ) 15 30 45 60 75 75
Complicated and sophisticated appli-
cation needs are relied on the FX-7.
The FX-7 series also provides the
RX-LS200
PHOTOELECTRIC SENSOR
APPLICATIONS
FZ-10
surface. chamber with air-tightness. ually.
FX-7
Fiber Sensor
FT-J6
FD-L42
FT-KV2
FV-BR1
FX-10
Detecting clock hands Presence of glass board Seam on can
The FD-EG1 fiber and the FX-MR3 The FD-L41 securely detects the The FD-AFM2E array fiber accurately
FX-11A
spot lens produce the smallest nearest glass board only. detects a seam on a can because of
projection area of 0.3mm diameter. its line focusing.
Glass board cassette
CX-20
FD-AFM2E
Glass board
CX-30
FD-EG1
FX-MR3 FD-L41
CX-ND300R
External Synchronization (FX-75 only) Test Input (FX-75 only) Remote Sensitivity Adjustment (FX-77 only)
The FX-75 is incorporated with the trig- The FX-75 is incorporated with the test As the sensitivity can be set with two
ger function, either gate or edge trigger input that makes beam emission stop. remote switches from the amplifier,
EX-10
Amplifier Built-in Type
is available. It is useful to check for the operability your production change-over becomes
With only a synchronizing sensor before start-up. smooth.
directly connected to the FX-75, the <When using thru-beam fiber>
synchronous detection is realized
EQ-20
without any other controller.
<For IC orientation detection>
Sensor for
detection
Sensing
EQ-30
output
PLC, switch, etc. PLC, switch, etc.
Pink
Violet Violet
External Blue
synchronization Blue
input
Synchronizing EX-40
sensor
Off-delay Timer (FX-7 & FX-77 only) New Fibers Plug-in Connector Type
Each of the FX-7 and the FX-77 is The FD-L41 for detecting glass The FX-7 amplifier with the plug-in
incorporated with the OFF-delay timer, boards, the FD-L42 for detecting connector on the tail can be connected
RX
for approx. 40ms fixed. wafers or specular objects, the FT-K2 with the SL-BM or the SL-BX of the
It is useful when the output signals are for detecting wafers in a cassette by sensor & wire-saving link system
so quick and short that a connected the sharp beam (opening angle 4), S-LINK; the SL-BMW or the SL-BW of
RX-LS200
device can not take in, for example, and the FT-KV2 as the side-view type the sensor block for simple wiring; or
by slow scanning time of a device or of the FT-K2. the CN-54-C2 or the CN-54-C5 mating
miniature object detection on a fast cable at a touch.
production line. Refer to the details of the S-LINK
ON system on P.582l, the sensor block
Normal
operation OFF for simple wiring on P.626l.
ON
Timer
operation OFF
Approx.
40ms
For general use fibers [Thru-beam mode (One pair of two fibers a set)]
Sensing range (*1) Min. sensing object
Type Shape of fiber head (mm)
[on optimum condition (*2)]
Features Fiber cable Model No.
: Red LED type
: Green LED type [ R : Red LED type
G : Green LED type ] length
FZ-10
Long sensing
Lens applicable M4
600mm R "0.16mm opaque object • Twice longer sensing range Free Cut
range
FT-FM2
FX-7
Fiber Sensor
FT-SFM2
M3
FT-NFM2
Small diameter
Lens applicable M4
90mm R "0.05mm opaque object • Small diameter fiber head
2m
CX-30
Small diameter 6mm G "0.08mm opaque object with coiled cable FT-C4
Lens applicable M4
320mm R "0.08mm opaque object
25mm FT-P80
G "0.08mm opaque object
Flexible
CX-ND300R
Free Cut
Small diameter • Allowable bending radius :
M3
R "0.05mm opaque object R4mm or more
2m
100mm
6mm G "0.08mm opaque object • Bending durability : FT-P40
One million times or more
Small diameter "1.5
120mm R "0.08mm opaque object
7mm G "0.08mm opaque object
1m FT-P2 (*3)
EX-10
Amplifier Built-in Type
Type Shape of fiber head (mm) : Red LED type Features Model No.
: Green LED type [ R : Red LED type
G : Green LED type ] length
Lens applicable M4
FT-H35-M2
• Heat-resistant : 350C
• Cold-resistant : 60C 2m
EQ-30
With sleeve M4
270mm R "0.12mm opaque object FT-H35-M2S6
Heat-resistant
Lens applicable 1m
RX-LS200
200mm )
M4 • Applicable in vacuum
chamber
• Heat-resistant : 120C 1m
100mm R "0.1mm opaque object FT-60V
( Bending
30mm )
R:
(*1) : The free-cut fibers may reduce the sensing ranges 20% lower than the above specified according to how they are cut off.
(*2) : The optimum condition is specified that the sensitivity is adjusted to have the operation indicator exactly light up at a certain distance in the Light-ON mode.
(*3) : Its model No. has been changed because the shorter plug attachments are provided for the FX-7 connection. The specifications including the sensing
range are identical as before.
The vacuum fiber must be used with both the followings.
FT-J6 : Outer fibers in the atmosphere (One pair of two fibers a set)
FV-BR1 : Terminal joints (One pair of two joints a set)
PHOTOELECTRIC SENSOR
ORDER GUIDE
For special use fibers [Thru-beam mode (One pair of two fibers a set)]
Sensing range (*1) Min. sensing object
[on optimum condition (*2)] Fiber cable
Type Shape of fiber head (mm) : Red LED type Features Model No.
: Green LED type [ R : Red LED type
G : Green LED type
] length
FZ-10
• Large lenses on the tops of
range with lenses
M14 7,000mm
R "0.5mm opaque object
Long sensing
FX-7
60mm G "0.08mm opaque object
2m
Fiber Sensor
ing range.
Free Cut
an object at any place within
FX-10
Side sensing R Horizontal "0.05mm opaque object the area. 2m
180mm Vertical "0.3mm opaque object
15 20mm G Horizontal "0.03mm opaque object FT-AFM2E
Vertical "0.3mm opaque object
M4 • The fiber head is bent at a
Elbow
Lens applicable
210mm R "0.08mm opaque object Free Cut
right angle of 5mm radius at FT-R80
FX-11A
24mm G "0.08mm opaque object
the neck. 2m
Small "1 85mm R "0.05mm opaque object 1m FT-V22 (*3)
diameter
"2.5
Side-view
0.6
Sleeve part can not be bent. ("2 for FT-V22) 45mm R "0.05mm opaque object • The side-view sensing FT-V41
enables to use in a tight
"1.5 "2.5 space.
Free Cut
CX-20
120mm R "0.05mm opaque object
0.8 2m FT-SFM2SV2
12mm G "0.08mm opaque object
Sleeve part can not be bent.
"0.4 "3 • Ultra-small diameter heads
Ultra-small
diameter
5mm R "0.01mm opaque object produce the sharp beam 500mm FT-E10 (*3)
Sleeve part can not be bent. envelope of "0.125mm.
"0.5 "3 • Ultra-small diameter heads
CX-30
24mm R "0.03mm opaque object produce the sharp beam 1m FT-E20 (*3)
Sleeve part can not be bent. envelope of "0.25mm.
"3 R "0.3mm copper wire
• Beam-opening angle 4
650mm • Equivalent quality as the 1m
45mm G "0.3mm copper wire FT-K2
Narrow beam
laser ray
CX-ND300R
"3
• Beam-opening angle 4
275mm R "0.3mm copper wire 1m
• Side-view type FT-KV2
• The narrow beam-opening
"1 M3
angle, one-sixth of a conven-
120mm R "0.05mm opaque object 1m FT-KM1S2
tional model, reduces cross-
Sleeve part can not be bent. talking.
EX-10
(*1) : The free-cut fibers may reduce the sensing ranges 20% lower than the above specified according to how they are cut off.
EQ-20
Semi-standard fibers (Custom-order made)
The standard fibers can be modified in fiber cable length or in sleeve length based on your request. Select the fiber cable length (symbolized
with ) or the sleeve length (symbolized with ) you need from the below table.
EQ-30
Type Basic model No. Fiber cable length (Unit : m) Sleeve length (Unit : cm) Correlation between attenuation factor of sensing range
and fiber cable length
Standard of threaded FT-FM 3, 4, 5, 10, 15, 20, 25, 30 1.2
head (Free-cut)
The longer the fiber cable
Sensing range attenuation factor
With sleeve FT-FM -S 2 (*1), 3, 4, 5, 10, 15, 20, 25, 30 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12 1.0
is the shorter the sensing
With large diameter lens FT-FM L 20, 30 range becomes. 0.8
M6
Long sensing
FD-5 (*4)
FX-7
Fiber Sensor
"2.5 FD-FM2S4
With sleeve 40mm
M4
FD-NFM2
Small diameter
Small diameter M3
R4mm or more
2m
8mm R "0.01mm gold wire FD-P40
• Bending durability :
One million times or more
Small diameter "1.5
EX-10
• Heat-resistant : 350C
M6 • Cold-resistant : 60C 2m
With sleeve
FD-H35-M2S6
"2.8 R "0.01mm gold wire
With sleeve 60mm
88mm
Heat-resistant
M6 • Heat-resistant : 130°C
R "0.01mm gold wire
• Cold-resistant : 60°C
88mm Free Cut
11mm G "1.45mm stainless steel bar
FD-H13-FM2
RX
• Free-cut type 2m
Vacuum
M6 • Applicable in vacuum
R "0.1mm copper wire 1m
RX-LS200
(*1) : The sensing range is specified with using white non-glossy paper (50 50mm). (FD-B8 : 100100mm, FD-SFM2SV2 : 3030mm, FD-KM1S2 :
1010mm)
(*2) : The free-cut fibers may reduce the sensing ranges 20% lower than the above specified according to how they are cut off.
(*3) : The minimum sensing object is obtainable with the maximum sensitivity, but at the ideal sensing distance within the rated sensing range.
(*4) : Its model No. has been changed because the shorter plug attachments are provided for the FX-7 connection. The specifications including the sensing
range are identical as before.
The vacuum fiber must be used with both the followings.
FT-J6 : Outer fibers in the atmosphere (One pair of two fibers a set)
FV-BR1 : Terminal joints (One pair of two joints a set)
PHOTOELECTRIC SENSOR
ORDER GUIDE
FZ-10
1814 • The optical system cancels
4.5 to 8mm R "0.01mm gold wire affection by color or surface FD-L4
Convergent reflective
2421
Glass board
Free Cut
• Glass board is securely
FX-7
3 to 13mm R "0.2mm copper wire FD-L41
Fiber Sensor
(Center : 8mm) detected. 2m
Wafer or specular
1519
object detection
FX-10
Free Cut
Lens applicable M4 • The coaxial fiber gives FD-G4
High precision
2m
Coaxial 44mm R "0.01mm gold wire precise and symmetrical
sensing. 500mm FD-G500
• The combination with the
FX-11A
Lens applicable
M3 FX-MR3 lens gives the
Coaxial • Small diameter 13mm R "0.01mm gold wire 500mm FD-EG1
smallest spot diameter of
approx. "0.3mm.
Top sensing 20 R Horizontal "0.01mm
gold wire
Vertical "0.05mm • Its wide and flat detection
FD-AFM2
CX-20
Array
CX-30
• The fiber head is bent at a
Elbow
CX-ND300R
"3 15mm R "0.02mm gold wire FD-V41
Side-view
0.7
Sleeve part can not be bent. • The side view sensing
Free Cut
enables to use in a tight
"2 "5 space. 2m
24mm R "0.02mm gold wire
0.8 2mm G "2.1mm stainless steel bar
FD-SFM2SV2
Sleeve part can not be bent.
EX-10
"0.5 M3
Ultra-small
1.5mm
Sleeve part can not be bent.
Coaxial "0.8 M3 • The coaxial fiber gives
13mm R "0.01mm gold wire precise and symmetrical 1m FD-ENM1S1
Sleeve part can not be bent. sensing.
EQ-20
Coaxial • The narrow beam-opening
Narrow-
"2 M5
view
EQ-30
R (Liquid)
affects the sensing.
2m FD-F8Y
2520
Mountable on pipe
The standard fibers can be modified in fiber cable length or in sleeve length based on your request. Select the fiber cable length (symbolized
with ) or the sleeve length (symbolized with ) you need from the below table.
Correlation between attenuation factor of sensing range
Type Basic model No. Fiber cable length (Unit : m) Sleeve length (Unit : cm)
and fiber cable length
Standard of threaded 1.2
head (Free-cut) FD-FM 3, 4, 5, 10, 15, 20
Sensing range attenuation factor
(*1) : The standard fiber features 2m in fiber cable length and 4cm or 9cm in sleeve length.
0 5 10 15 20
Fiber cable length # (m)
Amplifiers
Functions ( : Incorporated)
adjustment
OFF-delay
prevention
Sensitivity
Test input
sensitivity
indication
Crosstalk
synchro-
External
Stability
Remote
nization
margin
Type Appearance Model No. Emitting element Output
FZ-10
timer
shift
FX-7 NPN open-collector transistor
Standard type
Red LED
FX-7
FX-7G NPN open-collector transistor
Green LED
FX-7GP PNP open-collector transistor
FX-10
synchronization
FX-75G Green LED
FX-11A
CX-20
for details.
Amplifier Built-in Type
Protective tube
Designation Model No. Description
EQ-30
FTP-N1000 (1m) M3
FT-NFM2S FD-P40 tube made of
thread
FTP-N1500 (1.5m) FT-NFM2S4 non-corrosive
stainless steel
FDP-500 (0.5m) FD-B8 FD-P80 protects the
For
RX
(*1) : Do not bend the sleeve part of any side-view fiber, ultra-small diameter head fiber, or narrow-view fiber. 20°
(*2) : Refer to P.242l for details of the universal sensor mounting stand. 20°
PHOTOELECTRIC SENSOR
OPTION
Six times longer Sensing range (mm) [Two lenses on both sides]
or more
FZ-10
Applicable amplifier
Fiber Red LED type Green LED type
• Ambient temperature :
60 to350C FT-B8 2,500 230
FT-FM2 2,000 200
FT-T80 2,000 200
Expansion lens FX-LE1
FX-7
FT-C4 2,540 290
Fiber Sensor
FT-P80 2,000 200
FT-H35-M2 1,600 140
FT-H20-M1 1,600 140
FX-10
FT-R80 1,600 190
FX-11A
large aperture Fiber
lenses FT-B8 3,500 (*1) 1,400
• Ambient temperature : FT-FM2 3,500 (*2) 1,700
60 to350C
For thru-beam fiber
CX-20
FT-H20-M1 1,600 (*1) 0,900
FT-H13-FM2 3,500 (*1) 0,800
FT-R80 3,500 (*1) 1,400
CX-30
Beam axis is bent Sensing range (mm) [Two lenses on both sides]
by 90. Applicable amplifier
Fiber Red LED type Green LED type
• Ambient temperature :
60 to300C FT-B8 750 40
CX-ND300R
FT-FM2 400 35
Side-view lens FX-SV1 FT-T80 400 35
FT-C4 120
FT-P80 400 35
EX-10
FT-H35-M2 300 25
Six times longer Sensing range (mm) [Two lenses on both sides]
or more Applicable amplifier
EQ-20
Red LED type
Expansion lens for Fiber
• Ambient temperature :
FV-LE1
vacuum fiber 60 to350C FT-6V 1,200
FT-60V 1,600
EQ-30
Pinpoint spot lens FX-MR1 • Applicable amplifiers : Red LED type • Distance to focal point : 61mm
• Applicable fibers : FD-G4 or FD-G500 • Ambient temperature :60 to300C
Spot diameter
Spot diameter
(*1) : The fiber cable length practically limits the sensing range at 3,500mm long (FT-H20-M1 : 1,600mm).
(*2) : The sensing range can be expanded up to 14.5m with fiber cables 10m long each.
(*3) : The sensing range can be expanded up to 5.5m with fiber cables 3m each.
Fibers
Standard, Small fiber Side-view,
head, Small diameter, Narrow beam, Liquid level detection
Type Flexible, Long sensing Heat-resistant Chemical- Convergent Narrow-view,
FZ-10
R200mm
Fiber Sensor
( )
Allowable bending R30mm or R10mm or FT-K2 and R40mm or more R10mm or
Flexible : R4mm or more, FT-60V :
radius ( Thru-beam of ultra-small diameter : R5mm or more ) more
( R30mm
or more
) more FT-KV2 :
R10mm
or more
Fiber cable :
R15mm or more
more
FX-10
20 to60°C
( )
FT-V41,
40 to70°C 40 to125°C 40 to100°C
Ambient 40 to70°C 60 to350°C 60 to200°C 60 to130°C 40 to115°C 40 to120°C FD-L42 :
FD-V41,
temperature (FD-EG1 : 20 to 60°C) (*1) ( 40 to60°C ) FT-K2, and (*2) (*2)
FX-11A
FT-KV2 :
40 to60°C
Ambient humidity 35 to 85%RH (No dew condensation nor icing allowed)
Fiber core Acrylic Multi-component glass (*3) Acrylic Quartz glass (*3) Acrylic
CX-20
Polyethylene
Thru-beam of urtra- Polyethylene
Sheath
(small diameter and
Flexible except for
FT-C4 and FD-P2 :
Vinyl chloride
) (
Silicone
SUS spiral
tube inside )
Fluorine
resin
Fluorine
resin
(
Reflective of narrow-
view type : Polyurethane,
FT-K2 and FT-KV2 :
Polyolefine
) Polypropylene
CX-30
High precision,
FT-C4,
Threaded part of
thru-beam of
ultra-small diam- Protective
eter, FT-P80, Protective ABS : tube :
Material
tube : Fluorine
Amplifier Built-in Type
FT-SNFM2, FD-KM1S2 :
FD-SNFM2, Brass
FT-SFM2L, Lens of
FT-P40, FT-P2, FT-K2 : Glass
FD-P40, FD-P2, Lens of
Sleeve part of FT-KV2 :
EQ-30
sleeve-attached Acrylic
fiber
ABS : FT-FM10L
(Lens : Acrylic)
EX-40
Threaded head fiber : 2 pcs. of nuts (thru-beam type : 4 pcs.) and 1 pc. of toothed lock washer (thru-beam type : 2pcs.)
Free-cut type, flexible coiled fiber, chemical-resistant fiber and liquid level detection fiber : 1 pc. of FX-CT1 (Fiber cutter)
RX
Small diameter of free-cut fiber, convergent reflective fiber, high precision of free-cut fiber, FD-F4 and FD-F9 : 2 sets of plug attachments
Accessories
(FD-L41, FD-L42, FD-F4 and FD-F9 : 1 set of attachments)
FD-F4 and FD-F9 : 4 pcs. of tying bands and 2 pcs. of anti-slip tubes
FD-L4 : 2 pcs. of M2.612mm screws with washers and 2 pcs. of nuts
RX-LS200
(*1) : If the fiber is used under30C, its resistable maximum temperature drops to200C. If the side-view lens FX-SV1 is put on the fiber head, the allowable
maximum temperature comes down to300C. (The ambient temperature range of the FX-SV1 is from60 to300C.)
(*2) : With the liquid level detection fiber, also make sure of the temperature of the liquid in which the fiber is immersed.
(*3) : Keep the fiber composed of multi-component glass or quarts glass from vibration or impact.
PHOTOELECTRIC SENSOR
SPECIFICATIONS
Amplifiers
NPN output PNP output
Type
Standard type External synchronization input type Remote sensitivity adjustment type Standard type
FZ-10
Item Model No. FX-7 FX-7G FX-75 FX-75G FX-77 FX-77G FX-7P FX-7GP
Supply voltage 12 to 24V DC 10% Ripple P-P 10% or less
Current consumption 30mA or less
PNP open-collector transistor
• Maximum source current : 100mA
FX-7
NPN open-collector transistor
Fiber Sensor
• Maximum sink current : 100mA • Applied voltage : 30V DC or less
Sensing output • Applied voltage : 30V DC or less • Residual voltage : 2.0V or less
• Residual voltage : 1.0V or less (at 100mA sink current) (at 100mA source current)
0.4V or less (at 16mA sink current) 1.0V or less
(at 16mA source current)
FX-10
Utillization category DC-12 or DC-13
Selectable either Light-ON or Dark-ON with the order of pressing ON and OFF buttons
Output operation (Selectable with the external inputs on the FX-77 or the FX-77G)
FX-11A
Short-circuit protection Incorporated
PNP open-collector transistor
NPN open-collector transistor • Maximum source current : 50mA
• Maximum sink current : 50mA • Applied voltage : 30V DC or less
Self-diagnosis output • Applied voltage : 30V DC or less • Residual voltage : 2.0V or less
• Residual voltage : 1.0V or less (at 50mA sink current)
CX-20
(at 50mA source current)
0.4V or less (at 16mA sink current) 1.0V or less
(at 16mA source current)
ON under the unstable sensing condition and it is restored automatically after approx. 40ms; also ON if the sensing output is
Output operation short-circuited until it is removed
(The remote sensitivity adjustment type makes it turned ON for approx. 40ms after the remote sensitivity input is received.)
CX-30
Short-circuit protection
Response time 0.5ms or less (0.7ms or less when the crosstalk prevention function is used)
Operation indicator Red LED (lights up when the sensing output is activated)
CX-ND300R
Green LED “RUN” mode : Lights up at the stable Light condition or the stable Dark condition
Green LED
( “SET” mode : Blinks twice when the difference between ON and OFF levels is greater than the hysteresis, but 15 times
when it is equal to or less than the hysteresis after the completion of the sensitivity setting. Also blinks
twice after the crosstalk prevention is set
“SET” moden“SIF” or “RUN” mode : Blinks from 0 to 5 times according to the operation margin
)
EX-10
Amplifier Built-in Type
Test input function Incorporated
Incorporated
External synchronization function
( Either
trigger is selectable )
gate or edge
EQ-20
Remote sensitivity adjustment function Incorporated
Sensitivity shift function Shifts the sensitivity setting level
Crosstalk prevention function Incorporated
EQ-30
Fixed OFF-delay timer approx. 40ms
switchable either effective Fixed OFF-delay timer approx. 40ms
Timer function
(or ineffective ) (switchable either effective or ineffective)
Voltage withstandability 1,000V AC for one min. between all terminals connected and encloure (*1)
Insulation resistivity 20MΩ or more at 250V DC Megger between all terminals connected and enclosure (*1)
Vibration-proof 10 to 150Hz frequency, 0.75mm amplitude, and X, Y, and Z directions each for two hours (unenergized)
RX-LS200
Shock-proof 98m/s2 acceleration (approx. 10G), and X, Y, and Z directions each for five times (unenergized)
Emitting element Red LED (modulated) Green LED (modulated) Red LED (modulated) Green LED (modulated) Red LED (modulated) Green LED (modulated) Red LED (modulated) Green LED (modulated)
Material Enclosure : Heat-resistant ABS, Case cover : Polycarbonate, Fiber lock lever : PPS
Cable Cabtyre cable 2m long with six 0.15mm2 conductors (FX-7, FX-7G, FX-7P or PX-7GP : four 0.2mm2 conductors)
Cable extension Maximum extension is 100m overall with an equivalent cable with conductors 0.3mm2 or more
Weight Approx. 65g
Accessory MS-DIN-2 (Mounting bracket) : 1pc.
(*1) : The voltage withstandability and the insulation resistivity described in the above table are inherent in the amplifier only.
FX-7 FX-7G
FX-7J FX-7GJ Standard type NPN output
I/O circuit diagram Wiring diagram
FZ-10
Load
Sensing output 12 to 24V DC
Tr1
Load 12 to 24V DC 10%
ZD2 100mA max.
10%
Orange
FX-7
Black
Load
D (Brown)V
5V 10kΩ (Pink) External synchronization input Orange
Sensor circuit
Blue
or
Symbol . . . D : Reverse polarity protection diode
ZD1, ZD2 : Surge absorption zener diode Low : 0 to 1V
Tr1, Tr2 : NPN output transistor High : 4.5 to 30V or Open
FX-77G
EX-10
FX-77G
Brown
I/O circuit diagram Wiring diagram
Load
Color code Black
Load
EQ-20
D (Brown)V
5V 10kΩ (Pink) Remote sensitivity ON input Orange
Sensor circuit
ZD2
Tr1 (Orange) Self-diagnosis output
50mA max.
Tr2 (Blue) 0V Develop short-circuit with a contact or Violet
Furnish a switch to control NPN open-collector transistor
effectiveness of setting switch
Internal circuit Users’ circuit
Blue
or
EX-40
FX-7P FX-7GP
FX-7PJ FX-7GPJ Standard type PNP output
RX
D (Brown)V
Tr1 Black
Sensor circuit
PHOTOELECTRIC SENSOR
SENSING FIELDS (TYPICAL)
FZ-10
Red LED type• Green LED type Red LED type• Green LED type
100 100
50 50
FX-7
Excess gain
Excess gain
Fiber Sensor
10 10
Green LED type
5 5
Red LED type Red LED type
FX-10
Green LED type
1 1
0 100 200 300 400 500 0 50 100 150 200 250
Setting distance L (mm) Setting distance L (mm)
FX-11A
Parallel deviations
FT-FM2 FT-FM2S FT-FM2S4
FT-B8 Thru-beam FT-SFM2 FT-T80 Thru-beam
CX-20
Red LED type Green LED type Red LED type Green LED type
800 400 40
40
600 300
Sensing range L (mm)
CX-30
Fiber Fiber
head head
# 20 #
400 200
L Fiber L
Fiber 20 Fiber head
Fiber
head
# head head
# 10
CX-ND300R
200 L 100
Fiber L
head Fiber
head
0 0 0 0
200 100 0 100 200 20 10 0 10 20 200 100 0 100 200 20 10 0 10 20
Left Center Right Left Center Right Left Center Right Left Center Right
#
Operational point (mm) Operational point #(mm) #
Operational point (mm) Operational point #(mm)
EX-10
Amplifier Built-in Type
FT-NFM2 FT-NFM2S
FT-NFM2S4 FT-SNFM2 Thru-beam FT-C4 Thru-beam
Red LED type Green LED type Red LED type Green LED type
8 8
EQ-20
Fiber
head
#
100 100 L
Setting distance L (mm)
6 Fiber 6
head
EQ-30
4 4
50 50
Fiber Fiber Fiber
head head head
# 2 # 2 #
L L L
Fiber Fiber Fiber
0
head
0
head
0 0
head
EX-40
100 50 0 50 100 10 5 0 5 10 20 10 0 10 20 4 2 0 2 4
Left Center Right Left Center Right Left Center Right Left Center Right
#
Operational point (mm) Operational point #(mm) #
Operational point (mm) Operational point #(mm)
Red LED type Green LED type Red LED type Green LED type
400 40 8
RX-LS200
100
Setting distance L (mm)
300 30 6
Fiber
head
#
200 20 L 4
Fiber Fiber
head 50 Fiber Fiber
# head head head
#
100 L 10 # 2 L
Fiber L
head Fiber
Fiber head
head
0 0 0 0
100 50 0 50 100 20 10 0 10 20 40 20 0 20 40 10 5 0 5 10
Left Center Right Left Center Right Left Center Right Left Center Right
#
Operational point (mm) Operational point #(mm) Operational point #(mm) Operational point #(mm)
Parallel deviations
FT-H35-M2 FT-H35-M2S6
FT-P2 Thru-beam FT-H20-M1 Thru-beam
FZ-10
Red LED type Green LED type Red LED type Green LED type
8 400
100 20
300
FX-7
Fiber Sensor
4 200
Fiber
50 head 10
Fiber Fiber Fiber
head head head
# 2 # 100 # #
L
FX-10
L L L
Fiber Fiber Fiber Fiber
head head head head
0 0 0 0
100 50 0 50 100 10 5 0 5 10 200 100 0 100 200 20 10 0 10 20
Left Center Right Left Center Right Left Center Right Left Center Right
Operational point #(mm) Operational point #(mm) Operational point #(mm) Operational point #(mm)
FX-11A
400 2,000
Horizontal
&
vertical
directions
30 300
Setting distance L (mm)
300 1,500
Fiber
head
#
CX-30
20 1,000 L 200
200
Fiber Fiber Vertical Horizontal
head head direction direction
Fiber #
head Fiber head
# # #
100 10 500 100 L
L L
L Fiber
CX-ND300R
6,000
Setting distance L (mm)
4,000
Fiber
EQ-30
Red LED type Green LED type Red LED type Green LED type
800 80 40
RX-LS200
200
Setting distance L (mm)
600 60 30
400 40 20
100
Fiber Fiber Fiber Fiber
head head head head
200 # 20 # # 10 #
L L L L
Fiber Fiber Fiber Fiber
head head head head
0 0 0 0
200 100 0 100 200 20 10 0 10 20 200 100 0 100 200 20 10 0 10 20
Left Center Right Left Center Right Left Center Right Left Center Right
Operational point #(mm) Operational point #(mm) Operational point #(mm) Operational point #(mm)
PHOTOELECTRIC SENSOR
SENSING FIELDS (TYPICAL)
Parallel deviations
FZ-10
Red LED type Green LED type Red LED type Green LED type
Vertical Vertical
direction direction
200 20 200 20
FX-7
Horizontal Horizontal
Fiber Sensor
direction direction
FX-10
direction direction
0 0 0 0
200 100 0 100 200 20 10 0 10 20 200 100 0 100 200 20 10 0 10 20
(Down)Left Center Right(Up) (Down)Left Center Right(Up) (Down)Left Center Right(Up) (Down)Left Center Right(Up)
Operational point #(mm) Operational point #(mm) Operational point #(mm) Operational point #(mm)
FX-11A
FT-V22 Thru-beam FT-V41 Thru-beam FT-SFM2SV2 Thru-beam
Red LED type Red LED type Red LED type Green LED type
20
CX-20
100 40 100
15
Horizontal Horizontal
Horizontal Horizontal &
& & & vertical
vertical vertical vertical directions
CX-30
directions directions directions 10
Vertical Vertical Vertical Vertical Horizontal
50 direction Horizontal 20 direction Horizontal 50 direction Horizontal direction direction
direction # direction
# # direction #
Fiber Fiber head Fiber head Fiber head
head # # 5 #
L L L L
L Fiber L Fiber L L Fiber
#
CX-ND300R
Fiber head Fiber head Fiber Fiber Fiber head Fiber
head Fiber head Fiber head head Fiber head head
head head head
0 0 0 0
100 50 0 50 100 40 20 0 20 40 100 50 0 50 100 10 5 0 5 10
(Down)Left Center Right(Up) (Down)Left Center Right(Up) (Down)Left Center Right(Up) (Down)Left Center Right(Up)
Operational point #(mm) Operational point #(mm) Operational point #(mm) Operational point #(mm)
EX-10
FT-E10 FT-E20 FT-K2
EQ-20
20 40
Setting distance L (mm)
Setting distance L (mm)
Setting distance L (mm)
Setting distance L (mm)
6 600
Fiber
head
#
4 L 400
EQ-30
Fiber 10 Fiber Fiber 20 Fiber
head head head head
# # #
2 200
L L L
Vertical
direction 100
Setting distance L (mm)
300
200
Fiber
50 head
Vertical Horizontal
direction #
100 direction
# Fiber head L
#
L Fiber
Fiber L Fiber Fiber head
head head head
0 0
10 5 0 5 10 10 5 0 5 10
(Down) Left Center Right (Up) Left Center Right
Operational point #(mm) Operational point #(mm)
Red LED type Green LED type Red LED type Green LED type
4,000
Lens top
# part
L 200 2,000 200
2,000
100 1,000 100
Lens Lens
top Lens top top
1,000 # part # part # part
FX-10
L L L
Lens Lens
top Lens top top
part part part
0 0 0 0
200 100 0 100 200 40 20 0 20 40 400 200 0 200 400 40 20 0 20 40
Left Center Right Left Center Right Left Center Right Left Center Right
Operational point #(mm) Operational point #(mm) Operational point #(mm) Operational point #(mm)
FX-11A
800
600
CX-30
400
50 1,000 Lens 100 Lens
Lens top top
Lens top top part part
# part # #
200 # part
L L L
L
CX-ND300R
FT-H35-M2
FT-R80
Amplifier Built-in Type
1,500
1,000 Lens
top
EQ-30
Red LED type Green LED type Red LED type Green LED type
4,000 2,000 4,000 2,000
RX-LS200
Lens Lens
top part top part
0 0 0 0
400 200 0 200 400 200 100 0 100 200 200 100 0 100 200 100 50 0 50 100
Left Center Right Left Center Right Left Center Right Left Center Right
Operational point #(mm) Operational point #(mm) Operational point #(mm) Operational point #(mm)
PHOTOELECTRIC SENSOR
SENSING FIELDS (TYPICAL)
FZ-10
Red LED type Green LED type Red LED type Green LED type
4,000 2,000 4,000 2,000
FX-7
Lens
Fiber Sensor
L # top part
2,000 1,000 2,000 L
1,000
Lens
top part
Lens Lens
Lens top part
top part # top part
1,000 500 # 1,000 500
L
FX-10
L
Lens Lens
top part top part
0 0 0 0
200 100 0 100 200 100 50 0 50 100 200 100 0 100 200 100 50 0 50 100
Left Center Right Left Center Right Left Center Right Left Center Right
Operational point #(mm) Operational point #(mm) Operational point #(mm) Operational point #(mm)
FX-11A
FT-H35-M2 Thru-beam FT-H20-M1 Thru-beam
Red LED type Green LED type Red LED type Green LED type
4,000 4,000
CX-20
1,000 1,000
Setting distance L (mm)
3,000 3,000
Lens Lens
# top part # top part
CX-30
2,000 2,000
L L
500 500
Lens Lens Lens Lens
top part top part top part
# # top part
1,000 1,000
L L
CX-ND300R
Lens Lens
top part top part
0 0 0 0
200 100 0 100 200 100 50 0 50 100 200 100 0 100 200 100 50 0 50 100
Left Center Right Left Center Right Left Center Right Left Center Right
Operational point #(mm) Operational point #(mm) Operational point #(mm) Operational point #(mm)
EX-10
FT-H13-FM2 FT-FM10 FT-H35-M3
EQ-20
part
1,000 #
15
Setting distance L (mm)
3,000 L 6
Setting distance L (m)
Lens top
part
2,000 10 4
EQ-30
500 Lens
Lens Lens top
# top part top part part
# 5 #
1,000 2 L
L L
Lens
Lens Lens top
top part top part part
0 0 0 0
400 200 0 200 400 100 50 0 50 100 400 200
Left
0
Center
200
Right
400 400 200 0 200 400 EX-40
Left Center Right Left Center Right Left Center Right
Operational point #(mm) Operational point #(mm) Operational point #(mm) Operational point #(mm)
Parallel deviations with FV-LE1 (Vacuum• expansion lens) applied on both sides
1,000
Setting distance L (mm)
600
400
500
Lens Lens top
top part
# part #
200
L L
Lens Lens top
top part
part
0 0
100 50 0 50 100 100 50 0 50 100
Left Center Right Left Center Right
Operational point #(mm) Operational point #(mm)
Red LED type Green LED type Red LED type Green LED type
800
Horizontal
direction
40 400 40
Setting distance L (mm)
directions Horizontal
400 direction Vertical Horizontal
direction direction
20 20 L #
200
Horizontal #
direction Vertical Horizontal Vertical L # Vertical Vertical
200 direction direction direction direction direction
L
FX-10
# # Horizontal #
Vertical
L L direction direction
# L # L L
0 0 0 0
200 100 0 100 200 20 10 0 10 20 200 100 0 100 200 20 10 0 10 20
(Down)Left Center Right(Up) (Down)Left Center Right(Up) (Down)Left Center Right(Up) (Down)Left Center Right(Up)
Operational point #(mm) Operational point #(mm) Operational point #(mm) Operational point #(mm)
FX-11A
Horizontal
direction
100 400 40
Setting distance L (mm)
Horizontal Horizontal
& direction
vertical Vertical
directions Vertical direction
CX-30
direction
50 200 20
Horizontal Vertical Horizontal Vertical Horizontal Vertical
direction direction direction direction direction direction
# # #
CX-ND300R
L # L L # L
#
L L
0 0 0
40 20 0 20 40 100 50 0 50 100 20 10 0 10 20
(Down)Left Center Right(Up) (Down)Left Center Right(Up) (Down)Left Center Right(Up)
Operational point #(mm) Operational point #(mm) Operational point #(mm)
EX-10
FT-H35-M2
Amplifier Built-in Type
FT-H20-M1 Thru-beam
Red LED type Green LED type
Horizontal
EQ-20
direction
400 40
Setting distance L (mm)
Vertical
Vertical direction
direction
#
EQ-30
200 L 20
Horizontal Horizontal
Horizontal direction direction Vertical
direction direction
Vertical #
direction L #
L # L
0 0
EX-40
Sensing fields
FD-5 FD-FM2 FD-FM2S
FD-B8 Reflective Reflective
RX
10
Setting distance L (mm)
150 15 150
White non- White non-
glossy paper glossy paper
# White non-
100 White non- 10 100 glossy paper #
glossy paper L # L
# Fiber 5 Fiber
# head L
L head
Fiber
50 Fiber 5 50 head
head
0 0 0 0
40 20 0 20 40 4 2 0 2 4 40 20 0 20 40 2 1 0 1 2
Left Center Right Left Center Right Left Center Right Left Center Right
Operational point #(mm) Operational point #(mm) Operational point #(mm) Operational point #(mm)
PHOTOELECTRIC SENSOR
SENSING FIELDS (TYPICAL)
Sensing fields
FD-NFM2 FD-NFN2S
FD-T40 Reflective FD-NFM2S4 FD-SNFM2 Reflective
FZ-10
Red LED type Green LED type Red LED type Green LED type
40 4 40
FX-7
Fiber Sensor
glossy paper glossy paper
20 # 2 20 #
L L White non-
Fiber White non- Fiber 1 glossy paper
head glossy paper head #
1 #
10 10 L
FX-10
L Fiber
Fiber head
head
0 0 0 0
10 5 0 5 10 1 0.5 0 0.5 1 10 5 0 5 10 1 0.5 0 0.5 1
Left Center Right Left Center Right Left Center Right Left Center Right
Operational point #(mm) Operational point #(mm) Operational point #(mm) Operational point #(mm)
FX-11A
FD-P80 Reflective FD-P40 Reflective
Red LED type Green LED type Red LED type
8
CX-20
100 10
Setting distance L (mm)
6
Setting distance L (mm)
White non-
glossy paper
#
CX-30
4
White non- L
50 glossy paper White non- 5 Fiber
# glossy paper head
#
L 2
Fiber L
CX-ND300R
head Fiber
head
0 0 0
20 10 0 10 20 2 1 0 1 2 4 2 0 2 4
Left Center Right Left Center Right Left Center Right
Operational point #(mm) Operational point #(mm) Operational point #(mm)
EX-10
FD-H35-M2 FD-H35-M2S6
FD-P2
EQ-20
Approaching
1.0 direction of 80 10
Setting distance L (mm)
15 white non-
glossy paper
White non-
glossy paper
#
10
L
EQ-30
White non- 0.5 White non- 40 White non- 5 Fiber
glossy paper glossy paper glossy paper head
# # #
5
L L L
Fiber Fiber Fiber
head head head
0 0 0 0
4 2 0 2 4 0.4 0.2 0 0.2 0.4 40 20 0 20 40 4 2 0 2 4 EX-40
Left Center Right Left Center Right Left Center Right Left Center Right
Operational point #(mm) Operational point #(mm) Operational point #(mm) Operational point #(mm)
Red LED type Green LED type Red LED type Red LED type
80
RX-LS200
80 10 10
Setting distance L (mm)
60
White non- White non-
glossy paper glossy paper
White non-
# # glossy paper
L L #
40
Fiber Fiber L
40 head 5 head White non- 5 Fiber
glossy paper head
#
20
L
Fiber
head
0 0 0 0
40 20 0 20 40 4 2 0 2 4 20 10 0 10 20 4 2 0 2 4
Left Center Right Left Center Right Left Center Right Left Center Right
Operational point #(mm) Operational point #(mm) Operational point #(mm) Operational point #(mm)
Sensing fields
Red LED type Red LED type (Wafer) Red LED type (Glass board) Red LED type
20 4 4
40
Setting distance L (mm)
direction
Fiber Sensor
Horizontal
direction
10 2 2
Vertical Glass
Horizontal board
direction direction Wafer # Fiber : # Fiber 20 White non-
head head
252 2525 L Approaching L glossy paper
t1.3mm t1.3mm
5 glass board glass board 1 1 direction of #
glass board
FX-10
L
# #
12mm L 3mm L Fiber
head
0 0 0 0
1 0.5 0 0.5 1 0.4 0.2 0 0.4 0.2 0.4 0.2 0 0.4 0.2 10 5 0 5 10
(Down)Left Center Right(Up) Down Center Up Down Center Up Left Center Right
Operational point #(mm) Operational point #(mm) Operational point #(mm) Operational point #(mm)
FX-11A
FD-AFM2
FD-G500 Reflective FD-EG1 Reflective FD-AFM2E Reflective
Red LED type Red LED type Red LED type Green LED type
20
CX-20
80
40 4
Setting distance L (mm)
15
Setting distance L (mm)
60 Horizontal &
vertical directions Horizontal
White non- direction
Vertical glossy
paper
CX-30
direction
10 40 Vertical
direction
20 White non- White non- 2
glossy paper glossy paper Horizontal
Horizontal direction White non-
# 5 # direction
20 glossy paper
L L
CX-ND300R
Fiber
Fiber head Vertical
head direction
0 0 0 0
20 10 0 10 20 4 2 0 2 4 20 10 0 10 20 4 2 0 2 4
Left Center Right Left Center Right (Down)Left Center Right(Up) (Down)Left Center Right(Up)
Operational point #(mm) Operational point #(mm) Operational point #(mm) Operational point #(mm)
EX-10
FD-R80 FD-V41
Amplifier Built-in Type
Reflective Reflective
Red LED type Green LED type Red LED type
80 8 20
EQ-20
60 6 15
Horizontal
&
White non- vertical
glossy paper
directions
40 # 4 10 Horizontal Vertical
EQ-30
L direction direction
Fiber White non- White non-
head glossy paper White non- glossy paper
glossy paper
20 2 # 5 L
L L
Fiber
Fiber head # Fiber
head head #
0 0 0
EX-40
20 10 0 10 20 2 1 0 1 2 10 5 0 5 10
Left Center Right Left Center Right (Down)Left Center Right(Up)
Operational point #(mm) Operational point #(mm) Operational point #(mm)
Red LED type Green LED type Red LED type Red LED type
40 2 20
Vertical
direction
RX-LS200
2
Setting distance L (mm)
Setting distance L (mm)
30 1.5 15
Sensing range L (mm)
Horizontal :
Horizontal direction Approaching
& direction of
vertical white non- White non-
directions glossy paper glossy paper White non-
20 Horizontal Vertical 1 10 glossy paper
Horizontal Vertical #
direction direction direction direction #
White non- 1 White non- L
White non- glossy paper White non- Fiber L
glossy paper
glossy paper glossy paper head Fiber
10 L L 0.5 5 head
L L
Fiber Fiber
head # Fiber head # Fiber
head # head #
0 0 0 0
10 5 0 5 10 0.4 0.2 0 0.2 0.4 1 0.5 0 0.5 1 4 2 0 2 4
(Down)Left Center Right(Up) (Down)Left Center Right(Up) Left Center Right Left Center Right
Operational point #(mm) Operational point #(mm) Operational point #(mm) Operational point #(mm)
PHOTOELECTRIC SENSOR
SENSING FIELDS (TYPICAL)
Sensing fields Sensing fields with FX-MR1 (Pinpoint spot lens) applied
FZ-10
Red LED type Red LED type Red LED type
10 10
6.5
FX-7
Fiber Sensor
:Approaching
direction of 6.0
white non-
5 White non- 5 glossy paper White non- White non-
glossy paper glossy paper glossy paper
# # 5.5 #
FX-10
L L L
Fiber Lens top
head Lens top
part part
0 0 0
1 0.5 0 0.5 1 1 0.5 0 0.5 1 0.4 0.2 0 0.2 0.4
Left Center Right Left Center Right Left Center Right
Operational point #(mm) Operational point #(mm) Operational point #(mm)
FX-11A
Sensing fields with FX-MR2 (Zoom lens) applied
CX-20
Screw-in depth 7mm Screw-in depth 14mm Screw-in depth 7mm Screw-in depth 14mm
40 80 40 80
CX-30
White non- White non- White non-
glossy paper glossy paper glossy paper
20 White non- 40 # 20 # 40
#
glossy paper
L L L
#
Lens top Lens top
CX-ND300R
Lens top
L part part part
Lens top
part
0 0 0 0
10 5 0 5 10 4 2 0 2 4 2 1 0 1 2 2 1 0 1 2
Left Center Right Left Center Right Left Center Right Left Center Right
Operational point #(mm) Operational point #(mm) Operational point #(mm) Operational point #(mm)
EX-10
Amplifier Built-in Type
FD-G4 Reflective FD-EG1 Reflective
Red LED type Red LED type
EQ-20
10 10
Setting distance L (mm)
EQ-30
5 5
White non- White non-
glossy paper glossy paper
# #
L L
Lens top
part
Lens top
part EX-40
0 0
1 0.5 0 0.5 1 1 0.5 0 0.5 1
Left Center Right Left Center Right
#
Operational point (mm) #
Operational point (mm)
RX
RX-LS200
L 15 # 30
L #
L
FX-7
Fiber Sensor
Screw-in Screw-in
depth 10 20 Screw-in
depth depth
10
5 10
FX-10
Correlation between diameter of an object and sensing field (Red LED type)
FD-5 FD-FM2
FD-B8 Reflective FD-T80 FD-S80 Reflective FD-T40 Reflective FD-NFM2 Reflective
CX-20
40 40
# Gold wire # Gold wire
or copper L or copper
wire "0.5
L wire
Fiber
Fiber head 10 10 "0.32
Setting distance L (mm)
"0.45 head 30
"0.5 "0.45
"0.32
"0.1
CX-30
"0.08 "0.32
20 20 "0.32
"0.1 5 "0.08 5
"0.01
10 "0.01 10 # Gold wire "0.01 # Gold wire
"0.01 or copper or copper
L wire
CX-ND300R
L wire
Fiber Fiber
head head
0 0 0 0
10 5 0 5 10 10 5 0 5 10 4 2 0 2 4 4 2 0 2 4
Left Center Right Left Center Right Left Center Right Left Center Right
Operational point #(mm) Operational point #(mm) Operational point #(mm) Operational point #(mm)
EX-10
Amplifier Built-in Type
wire wire
Fiber Fiber "0.32 "0.32
head "0.5 head
"0.5
Setting distance L (mm)
30 6 6 7
"0.32 "0.08
"0.1
"0.01
20 4 4 6
"0.32 "0.1
EQ-30
"0.1
10 2 2 "0.01 5 # Gold wire
"0.01 # Gold wire or copper
"0.01 Lor copper
L wire
wire
Fiber Fiber
head head
0 0 0 0
EX-40
10 5 0 5 10 2 1 0 1 2 2 1 0 1 2 1 0.5 0 0.5 1
Left Center Right Left Center Right Left Center Right Left Center Right
Operational point #(mm) Operational point #(mm) Operational point #(mm) Operational point #(mm)
FD-G4
Reflective FD-EG1 Reflective FD-AFM2 Reflective
RX
FD-G500
Gold 40 40
"0.5 # wire or Horizontal direction Vertical direction
copper "0.5
L wire "0.5 Gold wire
RX-LS200
Fiber 30 30 or copper
"0.32 wire
head "0.32
"0.32
"0.1
20 20 "0.1
"0.1 "0.1
10 5
"0.05
"0.01 "0.01
# Gold wire 10 "0.01 10
L or copper
wire
Fiber
head
0 0 0 0
10 5 0 5 10 2 1 0 1 2 10 5 0 5 10 10 5 0 5 10
Left Center Right Left Center Right Left Center Right Left Center Right
Operational point #(mm) Operational point #(mm) Operational point #(mm) Operational point #(mm)
PHOTOELECTRIC SENSOR
SENSING FIELDS (TYPICAL)
Correlation between diameter of an object and sensing field (Red LED type)
FZ-10
Gold wire
"0.45
L or copper "0.5
"0.32 # wire
20 10 Fiber
"0.32
4 L Gold wire
or copper
"0.1
FX-7
"0.08
Fiber Sensor
wire
10 Fiber#
5
Gold
head
"0.01 # wire or
copper "0.015 "0.02
L wire
2
Fiber
head
FX-10
0 0 0
10 5 0 5 10 2 1 0 1 2 4 2 0 2 4
Left Center Right Left Center Right Left Center Right
Operational point #(mm) Operational point #(mm) Operational point #(mm)
FX-11A
FD-EN500S1 Reflective FD-ENM1S1 Reflective FD-KM1S2 Reflective
8
"0.5 Gold "0.5
# wire or "0.32
copper
CX-20
1 "0.32 10 L wire
"0.5
Setting distance L (mm)
CX-30
Gold
"0.01 # wire or
copper "0.01 2 # Gold wire
L wire "0.02 or copper
L wire
Fiber Fiber
head head
0
CX-ND300R
0 0
1 0.5 0 0.5 1 2 1 0 1 2 1 0.5 0 0.5 1
Left Center Right Left Center Right Left Center Right
Operational point #(mm) Operational point #(mm) Operational point #(mm)
EX-10
• The following graphs are specified that two sensors are set at the same emitting frequency. If they are set at the distinct
EQ-20
Horizontal direction Vertical direction
6,000 300 200 200
Setting distance L (mm)
Setting distance L (mm)
EQ-30
Possible setting area Possible setting area Possible setting area
Possible setting area
3,000 150 100 100
Emitter Receiver Emitter Receiver Emitter Receiver
Emitter Receiver
#
# # #
Possible
600 Crosstalk area setting 100 600
Setting distance L (mm)
15mm
FX-7
Fiber Sensor
L
0 50 100 150 200
FX-11A
Distance between
#
fibers (mm)
Possible Possible
setting Crosstalk area
setting
CX-30
# # #
L L L
Amplifier
This product is not a safety sensor. Its use is not How to connect fiber cables
• The set of fiber cables is connected at a touch.
EQ-30
1 Hook the rear part to the attach- iber cables until fully deepend.
Stopper
ed mounting bracket (MS-DIN-2) 2 3 Snap the fiber lock
or DIN rail. lever up until a “click”
2 Press the amplifier down on the is heard.
2 Fiber lock lever
bracket or DIN rail.
RX
front side.
NON
RUN
OFD
OFF
SET
FX-77
SIF
ON
OUT
STB
1
2 Mode selection switch Operation indicator
Timer operation mode switch (Red)
(*1)
Stability
Sensitivity setting ON button indicator (Green)
buttons OFF button