Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 4

%trianglefunction

function y=triangl(t)
y=(1-abs(t)).*(t>=-1).*(t<1);
end

%(ExampleDSBdemfilt.m)
ts =1.e-4;
t=-0.04:ts:0.04;
Ta=0.01;

m_sig=triangl((t+0.01)/0.01)-triangl((t-0.01)/0.01);
Lm_sig=length(m_sig);
Lfft=length(t);
Lfft=2^ceil(log2(Lfft));
M_fre=fftshift(fft(m_sig,Lfft));
freqm=(-Lfft/2:Lfft/2-1)/(Lfft*ts);
B_m=150; %Bandwidth of the signal is B_m Hz.
h=fir1(40,B_m*ts);

ts =1.e-4;
t=-0.04:ts:0.04;
Ta=0.01;fc=300;
s_dsb=m_sig.*cos(2*pi*fc*t);
Lfft =length(t);
Lfft=2^ceil(log2(Lfft));
S_dsb=fftshift(fft(s_dsb,Lfft));
freqs=(-Lfft/2:Lfft/2-1)/(Lfft*ts);

%Demodulation begins by multiplying with the carrier


s_dem=s_dsb.*cos(2*pi*fc*t)*2;
S_dem=fftshift(fft(s_dem,Lfft));
%Using an ideal LPF with bandwidth 150Hz
s_rec=filter(h,1,s_dem);
S_rec=fftshift(fft(s_rec,Lfft));

Trange=[-0.025 0.025 -2 2];


figure(1)
subplot(221);td1=plot(t,m_sig);
axis(Trange);
set(td1,'Linewidth',1.5);
title('message signal');
subplot(222);td2=plot(t,s_dsb);
axis(Trange);set(td2,'Linewidth',1.5);
title('DSB_SC modulated signal');
subplot(223);td3=plot(t,s_dem);
axis(Trange);set(td3,'Linewidth',1.5);
subplot(224);td4=plot(t,s_rec);
axis(Trange);set(td4,'Linewidth',1.5);
title('Recovered signal');

Frange=[-700 700 0 200];


figure(2)
subplot(221);
fd1=plot(freqm,abs(M_fre));
axis(Frange);set(fd1,'Linewidth',1.5);
title('message spectrum');
subplot(222);fd2=plot(freqs,abs(S_dsb));
axis(Frange);set(fd2,'Linewidth',1.5);
title('DSB_SC spectrum');
subplot(223);fd3=plot(freqs,abs(S_dem));
axis(Frange);set(fd3,'Linewidth',1.5);
subplot(224);fd4=plot(freqs,abs(S_rec));
axis(Frange);set(fd4,'Linewidth',1.5);
title('recovered spectrum');

You might also like