Professional Documents
Culture Documents
Manitou ANGLE GEARBOX 15930-15932
Manitou ANGLE GEARBOX 15930-15932
Manitou ANGLE GEARBOX 15930-15932
15930 / 15932
Repair manual
MANITOU BF
B.P 249 - 44158 ANCENIS Cedex Tél. 33 (0) 2 40 09 10 11
Fax commercial France : 02 40 09 10 96 // Export : 33 2 40 09 10 97
www.manitou.com
647058EN 1st Date of Issue :
20 / 11 / 2008
ISSUES OBSERVATION
THE TEXTS AND PICTURES IN THIS DOCUMENT CANNOT BE REPRODUCED, EITHER PARTLY OR TOTALLY.
CONTROL AND ADJUSTMENT
ANGLE GEAR BOX TRANSMISSION
pages
(20/11/2008)
2 Angle gear box
RECOMMENDED LUBRICANTS
Capacity
2.5 l
For good lubrication and a good operating temperature, it is very important to use an specified
oil and to maintain the correct lever.
Oil replacing
It is recommended to change the oil in the following working periods :
After first 50 hours services.
Every 800 hours max.
Many factors having an influence on the oil changing require to increase the oil changing
frequency.
Oil level
The level must be checked with the oil gauge dipstick, the oil must be located between both
mini. and maxi marks.
* Do not fill above the maxi. level , then this could lead to an increase in temperature, because
of the oil splash lubrication by the drive gears (emulsion and destruction of oil). This could also
provoke outer leaks.
The purpose of drains is also to eliminate metallic particles of intern components, these
metallic particles being the result of normal use.
(20/11/2008)
Angle gear box 3
(20/11/2008)
4
Type : 15932
22 Réf : 222 758
14 24
15
torque 39 - 58 N. m
torque : 12
25
39 - 58 N. m 13
29
1
2 1
3
5 32
6 33
8 13 20
9
47 19 34
17 47
18 2nd assembly
4 torque :
31
torque : 210 - 240 N. m
7 20 - 30 N. m
torque : A PARTIR DU RENVOI D'ANGLE
95 - 120 N. m AB DER ZAHNRADVORGELEGE 40a
A PARTIR DEL REENVIO DE ANGULO
FROM ANGLE RETURN
41
A PARTIR DEL RINVIO D'ANGOLO
37
(20/11/2008)
38 39
1st assembly
couple de serrage :
200 - 230 N. m
Angle gear box 5
1 - Shim 27 - Seal
2 - Flange 29 - Bearing
3 - Screw 31 - Flange
4 - Bearing 32 - Screw
5 - Seal 33 - Bearing
6 - Coupling flange 34 - Seal
7 - O ring 35 - Flange
8 - Washer 36 - O ring
9 - Screw 37 - Flange
12 - Bearing 38 - Washer
13 - Bevel gear assy 39 - Screw
14 - Key 40 - Washer
15 - Axle 40a - Lock washer
16 - Housing 41 - Nut
17 - Sludge door 42 - Bevel gear
18 - Screw 43 - Gauge
19 - Plug 44 - O ring
20 - Seal 45 - Plug
21 - Plug 46 - Seal
22 - Seal 47 - Gauged strut
23 - Air breather
24 - Key
25 - Drive shaft
26 - Roller bearing
(20/11/2008)
6 Angle gear box
DISASSEMBLY
-1-
-2-
-3-
-4-
(20/11/2008)
Angle gear box 7
-5-
-6-
-7-
-8-
(20/11/2008)
8 Angle gear box
-9-
- 10 -
- 11 -
- 12 -
(20/11/2008)
Angle gear box 9
- 13 -
- 14 -
- 15 -
- 16 -
(20/11/2008)
10 Angle gear box
- 17 -
- 18 -
- 19 -
Rondelle frein - 20 -
(20/11/2008)
Angle gear box 11
- 21 -
- 22 -
- 23 -
- 24 -
(20/11/2008)
12 Angle gear box
- 25 -
- 26 -
- 27 -
(20/11/2008)
Angle gear box 13
INFORMATIONS GÉNÉRALES
- 28 -
- 29 -
- 30 -
- 31 -
(20/11/2008)
14 Angle gear box
REMONTAGE
- 32 -
- 33 -
- 34 -
Measurement A :
- 35 -
(20/11/2008)
Angle gear box 15
- 36 -
- 37 -
- 38 -
- 39 -
(20/11/2008)
16 Angle gear box
- 40 -
- Lightly coat the flutings of the shaft with some
fixing agent 649; Réf.- 562227.
- Torque : 95-120 Nm
- 41 -
- 42 -
- 43 -
(20/11/2008)
Angle gear box 17
- 44 -
Measurement B :
- 45 -
- 46 -
- 47 -
Measurement C :
(20/11/2008)
18 Angle gear box
- 48 -
- 49 -
- 50 -
- 51 -
(20/11/2008)
Angle gear box 19
- 52 -
- 53 -
- Lightly coat the flutings of the shaft with some
fixing agent 649; Réf.- 562227.
- 54 -
- 55 -
- 56 -
- 57 -
- 58 -
Measurement D :
- 59 -
(20/11/2008)
Angle gear box 21
- 60 -
- 61 -
- 62 -
Measurement E :
- 63 -
(20/11/2008)
22 Angle gear box
- 64 -
Measurement F :
(20/11/2008)
Angle gear box 23
- For this formula the mounting dimensions marked on gears will be called (See fig. 28).
• Input gear Cote A = Cote B
Measurement G
• Output gear= Measurement H
• Picture 34 = measurement A
• Picture 58 = measurement D
• Picture 62 = measurement E
• Picture 28 = measurement G
• Picture 44 = measurement B
• Picture 47 = measurement C
• Picture 64 = measurement F
• Picture 28 = measurement H
(20/11/2008)
24 Angle gear box
- 65 -
- 66 -
(20/11/2008)
Angle gear box 25
- 67 -
- 68 -
- 69 -
Note : - Oil seal lips should be lubricated with a light grease on assembly.
- Bearings should be lubricated with an appropriate oil on assembly.
- Drain, filler, and oil level plugs should be torqued to 20 - 30 Nm.
(20/11/2008)
26 Angle gear box
(20/11/2008)