Professional Documents
Culture Documents
2011 LR English
2011 LR English
2011 LR English
PRECISE
Each gage is hand fitted to insure
Precision hubs for sensitive accuracy and exceeding
gaging accuracy .0001" (.003mm).
PROVEN
Since 1918, over 75,000 satisfied
customers have been saving time and
Dial indicator with money using Arnold gages.
dovetail back and cam
for easy zeroing on COST EFFECTIVE
your known workpiece The Arnold grinding gage
pays for itself in no time.
Hydraulic “dash-pot” mounting
for controlled lift and Time savings
Tungsten carbide
sensitive gaging + eliminated scrap
gage contacts for
long life
=$$$
PRECISE
Each gage is hand fitted to insure
Precision hubs for sensitive accuracy and exceeding
gaging accuracy .0001" (.003mm).
PROVEN
Since 1918, over 75,000 satisfied
customers have been saving time and
Dial indicator with money using Arnold gages.
dovetail back and cam
for easy zeroing on COST EFFECTIVE
your known workpiece The Arnold grinding gage
pays for itself in no time.
Hydraulic “dash-pot” mounting
for controlled lift and Time savings
Tungsten carbide
sensitive gaging + eliminated scrap
gage contacts for
long life
=$$$
LR-0 10.75” (273mm) LR (standard) 11.75” (298mm) Most common HR-3 Trunnion floating ball bearing WF, LRWF, TR-1
for lateral sensitivity
LR-3 14.75” (375mm) LR-0 10.75” (273mm) Use if your grinding wheel
is 12” (305mm) or smaller
HR-4 Short Trunnion TR-1 in limited space
LR-3 14.75” (375mm) Use for large crankshaft TR-1 TR-1 Laterally fixed Mounted to Right Side Mounted to Top Mounted to Rear Mounted to Front
grinding
HR-3 HR-4
HR-5 Long Trunnion HR-3 and TR-1
of Wheel Cover of Wheel Cover of Headstock of Headstock
Please contact us for other lengths
Laterally fixed (uses a custom bracket) (uses a custom bracket)
HR-7 Sliding Hub with extended CRANKSHAFT and
lateral float CAMSHAFT grinding
TRUNNION STORAGE RACK
2. CHOOSE AN INDICATOR... TR-1 Trunnion Hook Rod HR-3, HR-4, HR-5
TR-1 HR-7
HR-5 For ALL of these hubs, we recommend a DG-4 Dog Assembly to support
your ARNOLD GAUGE when retracted
ARNOLD dial indicators include a special dovetail
back for secure mounting to the gage frame. TRUNNION STORAGE RACK
The following models are available:
5. CHOOSE A MOUNTING ARM... The model TRS Trunnion Storage Rack mounts near
Indicator # Resolution Range Features the operator and holds up to 4 grinding gages
194028 .0005” .20” Rev Counter
equipped with trunnion style hub assemblies
Arm Use if your Notes
Length caliper size (HR-3, HR-4, HR-5). The operator simply takes a
194002 .0001” .025” Rev Counter
is... gage and snaps it into place. This saves time when
194003 .0001” .20” Rev Counter
8” Under 5” Most common grinding parts with 2 or more diameters to gage.
193703 .00005” .015” Rev Counter
10” 5-8”
194702 0.01mm 2.5mm Rev Counter
12” 8-12” Use if required by mounting distance
194701 0.002mm 0.5mm Rev Counter
14” Use if required by mounting distance
Digital Indicator available upon request
16” Use if required by mounting distance MODEL LRWF (for diameters and widths)
Offset mounting arms available
LR-0 10.75” (273mm) LR (standard) 11.75” (298mm) Most common HR-3 Trunnion floating ball bearing WF, LRWF, TR-1
for lateral sensitivity
LR-3 14.75” (375mm) LR-0 10.75” (273mm) Use if your grinding wheel
is 12” (305mm) or smaller
HR-4 Short Trunnion TR-1 in limited space
LR-3 14.75” (375mm) Use for large crankshaft TR-1 TR-1 Laterally fixed Mounted to Right Side Mounted to Top Mounted to Rear Mounted to Front
grinding
HR-3 HR-4
HR-5 Long Trunnion HR-3 and TR-1
of Wheel Cover of Wheel Cover of Headstock of Headstock
Please contact us for other lengths
Laterally fixed (uses a custom bracket) (uses a custom bracket)
HR-7 Sliding Hub with extended CRANKSHAFT and
lateral float CAMSHAFT grinding
TRUNNION STORAGE RACK
2. CHOOSE AN INDICATOR... TR-1 Trunnion Hook Rod HR-3, HR-4, HR-5
TR-1 HR-7
HR-5 For ALL of these hubs, we recommend a DG-4 Dog Assembly to support
your ARNOLD GAUGE when retracted
ARNOLD dial indicators include a special dovetail
back for secure mounting to the gage frame. TRUNNION STORAGE RACK
The following models are available:
5. CHOOSE A MOUNTING ARM... The model TRS Trunnion Storage Rack mounts near
Indicator # Resolution Range Features the operator and holds up to 4 grinding gages
194028 .0005” .20” Rev Counter
equipped with trunnion style hub assemblies
Arm Use if your Notes
Length caliper size (HR-3, HR-4, HR-5). The operator simply takes a
194002 .0001” .025” Rev Counter
is... gage and snaps it into place. This saves time when
194003 .0001” .20” Rev Counter
8” Under 5” Most common grinding parts with 2 or more diameters to gage.
193703 .00005” .015” Rev Counter
10” 5-8”
194702 0.01mm 2.5mm Rev Counter
12” 8-12” Use if required by mounting distance
194701 0.002mm 0.5mm Rev Counter
14” Use if required by mounting distance
Digital Indicator available upon request
16” Use if required by mounting distance MODEL LRWF (for diameters and widths)
Offset mounting arms available
LR-0 10.75” (273mm) LR (standard) 11.75” (298mm) Most common HR-3 Trunnion floating ball bearing WF, LRWF, TR-1
for lateral sensitivity
LR-3 14.75” (375mm) LR-0 10.75” (273mm) Use if your grinding wheel
is 12” (305mm) or smaller
HR-4 Short Trunnion TR-1 in limited space
LR-3 14.75” (375mm) Use for large crankshaft TR-1 TR-1 Laterally fixed Mounted to Right Side Mounted to Top Mounted to Rear Mounted to Front
grinding
HR-3 HR-4
HR-5 Long Trunnion HR-3 and TR-1
of Wheel Cover of Wheel Cover of Headstock of Headstock
Please contact us for other lengths
Laterally fixed (uses a custom bracket) (uses a custom bracket)
HR-7 Sliding Hub with extended CRANKSHAFT and
lateral float CAMSHAFT grinding
TRUNNION STORAGE RACK
2. CHOOSE AN INDICATOR... TR-1 Trunnion Hook Rod HR-3, HR-4, HR-5
TR-1 HR-7
HR-5 For ALL of these hubs, we recommend a DG-4 Dog Assembly to support
your ARNOLD GAUGE when retracted
ARNOLD dial indicators include a special dovetail
back for secure mounting to the gage frame. TRUNNION STORAGE RACK
The following models are available:
5. CHOOSE A MOUNTING ARM... The model TRS Trunnion Storage Rack mounts near
Indicator # Resolution Range Features the operator and holds up to 4 grinding gages
194028 .0005” .20” Rev Counter
equipped with trunnion style hub assemblies
Arm Use if your Notes
Length caliper size (HR-3, HR-4, HR-5). The operator simply takes a
194002 .0001” .025” Rev Counter
is... gage and snaps it into place. This saves time when
194003 .0001” .20” Rev Counter
8” Under 5” Most common grinding parts with 2 or more diameters to gage.
193703 .00005” .015” Rev Counter
10” 5-8”
194702 0.01mm 2.5mm Rev Counter
12” 8-12” Use if required by mounting distance
194701 0.002mm 0.5mm Rev Counter
14” Use if required by mounting distance
Digital Indicator available upon request
16” Use if required by mounting distance MODEL LRWF (for diameters and widths)
Offset mounting arms available
PRECISE
Each gage is hand fitted to insure
Precision hubs for sensitive accuracy and exceeding
gaging accuracy .0001" (.003mm).
PROVEN
Since 1918, over 75,000 satisfied
customers have been saving time and
Dial indicator with money using Arnold gages.
dovetail back and cam
for easy zeroing on COST EFFECTIVE
your known workpiece The Arnold grinding gage
pays for itself in no time.
Hydraulic “dash-pot” mounting
for controlled lift and Time savings
Tungsten carbide
sensitive gaging + eliminated scrap
gage contacts for
long life
=$$$