Professional Documents
Culture Documents
Huawei Router Basic Configuration Command
Huawei Router Basic Configuration Command
Huawei Router Basic Configuration Command
[Liufei]user-interface vty 04
[Liufei-ui-vty0-4]authentication-mode password
[Liufei-ui-vty0-4]quit
1
Static routing:
For example:
Dynamic routing:
[Liufei-rip]peer ip-address;
An example:
[Liufei]acl 10
[operate]
[icmp-code] [logging]
3
Greater-than PortNumber; greater than
[Liufei]acl 101
[Liufei]acl 102
[Liufei]acl 103
[Liufei]firewall enable
[Liufei]int E0
[Liufei]firewall enable
4
[Liufei]firewall default permit
[Liufei-acl-101]quit
[Liufei]int E0
[Liufei]acl 102; the external host specific and more than 1024 port packet is allowed to
enter the S0
1024
[Liufei-acl-102]quit
[Liufei]int S0
[Liufei-Serial0]nat outbound 101 interface; Easy IP, ACL 101 allows IP from this
interfacetransform source address.
5
More related:
HOW TO CONNECT HUAWEI ROUTER USE VPN
HOW TO CONFIGURE HUAWEI AR3200 SERIES ROUTER?
HOW TO CONFIGURE THE PPPOE CLIENT ON HUAWEI AR1200?
More Huawei products and Reviews you can visit: http://www.huanetwork.com/blog
6
More related:
HOW TO CONNECT HUAWEI ROUTER USE VPN
HOW TO CONFIGURE HUAWEI AR3200 SERIES ROUTER?
HOW TO CONFIGURE THE PPPOE CLIENT ON HUAWEI AR1200?
More Huawei products and Reviews you can visit: http://www.huanetwork.com/blog