Professional Documents
Culture Documents
ADSS Span 100m, 250m, 400m, 1100m-Antitracking-Technical Proposal
ADSS Span 100m, 250m, 400m, 1100m-Antitracking-Technical Proposal
Description
ADSS span 100m 250m 400m 1100m(Anti-tracking) rated cable that consists of loose tubes
stranded around the non-metal central strength member(FRP). The cable core wrapped with a
water blocking tape. Anit-tracking material extruded as inner sheath, and then Kevlar yarns are
applied over inner sheath to enhance tensile strength for self-supporting application. The loose
tube sheathing is made of high modulus plastics (PBT). The individual fibers are secondary
coated into the loose tube with suitable excess length and the tube is filled with tube filling
compound.
Characteristics
o All dielectric structure, light weight, easy installation, good electromagnetic resistance,
suitable for operating in the electrical system on towers and poles of high voltage power
line to meet the demands of the power sector.
o The cable is ideal for installation in distribution as well as transmission environments;
including live-line installations.
o Kevlar, as the main tensile strength member, has the advantages of high Young's modulus,
light, minor long-term extension. Its minor negative heat-expansion coefficient improves
cable temperature property.
o The amount of Kevlar applied to the cable can be adjusted to obtain the mechanical
properties required by the environment (span, sag, ice load, wind speed, etc.).
o No support or messenger wire is required. Installation is achieved in a single pass.
o Precision design and optimum control of excess length of the fibers in the tube to ensure
suited strain on the fibers, individually or collectively.
1
DETAILED SPECIFICATIONS –ADSS span 100m 250m 400m 1100m(Anti-tracking)
1. General
1.1 This specification covers the requirements for the supply of dry core, single-mode
optical fiber cables.
1.2 This single mode optical fiber cable shall comply with the requirements of this
specification and ITU-T G.652D.
2. Fiber characteristics
The optical, geometrical, mechanical and environmental performance of the optical fiber shall be
in accordance with tables 2.1.
2
Curl ≥4m
Mechanical characteristics
Proof stress ≥0.69GPa(100kpsi)
Coating strip force (typical value) 1.4N
Dynamic stress corrosion susceptibility parameter (typical value) ≥20
Macrobend loss Φ60mm,100 turns ≤0.05dB
at 1550nm Φ32mm,1turn ≤0.05dB
Environmental characteristics (at 1310nm & 1550nm)
Temperature induced attenuation(-60~+85℃) ≤0.05dB/km
Dry heat induced attenuation (85℃±2℃, 30 days) ≤0.05dB/km
Water immersion induced attenuation (23℃±2℃, 30 days) ≤0.05dB/km
Damp heat induced attenuation (85℃±2℃, RH85%, 30 days) ≤0.05dB/km
The mechanical and environmental performance of the cable shall be in accordance with Table
3.1 below. Unless otherwise specified, all attenuation measurements required in this section shall
be performed at 1550nm for single mode fiber.
L ≥ 50 m
Load:
ADSS-48B1.3 Span
100m : 3.0kN
ADSS-96B1.3 Span
250m : 3.0kN
ADSS-24B1.3 Span
250m : 5.8kN
Additional attenuation≤0.05 dB
IEC60794-1-2- ADSS-48B1.3 Span
Tensile Strength No visible damage to the surface
E1 250m : 6.0kN
of out sheath
ADSS-24B1.3 Span
400m : 9.5kN
ADSS-48B1.3 Span
400m : 10.0kN
ADSS-24B1.3 Span
1100m : 21.0kN
ADSS-48B1.3 Span
1100m : 22.5kN
3
The impact of weight:
≥450g Additional attenuation≤0.05dB
Impact IEC60794-1-2-
Weight high: 1m No visible damage to the surface
Resistance E4
3 point , 5 times per of out sheath
point
Load: 150 N
Additional attenuation≤0.05dB
Repeated IEC60794-1-2- Tests = 30 cycles
No visible damage to the surface
bending E6 Each cycle ≈ 2 sec.
of out sheath
L =1.0 m
The test length =1m,
±180 degree, Additional attenuation≤0.05dB
IEC60794-1-2-
Torsion 10 cycles, No visible damage to the surface
E7
Test weight 150N of out sheath
Test temperature:
-30℃& +70℃, Additional attenuation≤0.05dB
Mandrel diameter: at 1550nm for the temperature
Cable Bend at EIA RS-455-
20D(D=cable diameter), range.
low temperature 37
No. of turns: 4 No visible damage to the surface
Duration of test: 12h at of out sheath
each
Operating Temperature:
-30 º C to +70 º C
Temperature IEC60794-1-2-
Cycle time:24h Additional attenuation ≤0.05 dB
cycling F1
Cycle:2
Cable length: ≥ 1000 m
12h
70℃
-30℃
12h
4
At 20±5 ℃ ,1m water
Water penetration IEC60794-1-2- column applied to one of
No water penetration
Test F5 3m cable after 24h,no
water penetration
At a temperature of 70 ℃ (24h)
environmental conditions, the
Drain the IEC60794-1-2-
70 ℃ (24h) cable should not be filled
compound filling E14
composites and coating
compounds, such as drop out.
ETB FIBERHOME ADSS span 250m 48FO G.652D Anti-tracking 2012 "Length in
M "
The sheath shall be marked with white characters at intervals of one meter with following
information. Other marking is also available if requested by customer.
1) Customer of the manufacturer: ETB
2) Name of the manufacturer: FIBERHOMR
3) Fiber type and counts: ADSS span 250m 48FO G.652D Anti-tracking
4) Year of manufacture: 2012
5) Length marking in one meter intervals: example: 0001 m, 0002m, 0003m
The re-marking shall be marked on the outer cable sheath. Any cable that contains two sets of
cable markings shall be marked to indicate the color of the marking to be used.
Standard length of cable shall be 4,000m per reel with a tolerance of +/- 200m. Other cable
lengths are also available if requested by customer.
5
Both ends of the cable shall be sealed with suitable plastic caps to prevent the entry of moisture
during shipping, handling and storage.
The cable ends shall be securely fastened to the reel to prevent the cable from becoming loose in
transit or during placing operations.
The inner end of the cable is housed into a slot on the side of the reel without extra cable length
for testing.
Circumference battens or wood-fiber board shall be secured with steel bands to protect the cable
during normal handling and shipping.
4.4.1 Details given below shall be distinctly marked with a weather-proof material on
both outer sides of the reel flange:
1) Purchaser’s name
2) Reel number
3) Name of the manufacturer
4) Year of manufacture
5) Arrow showing the direction the drum shall be rolled
4.4.3 The cable shall be shipped on reels designed to prevent damage to the cable during
shipment and installation.
4.4.4 The arbor holes provided in the reels shall be approximately 105 mm with a wood or
steel hub in the arbor hole (in lieu of fiberboard).
6
5 Fiber and Loose Buffer Tube Identification
The color code of the loose buffer tubes and the individual fibers within each loose buffer is
displayed in tables 5.1 for the loose buffer tubes and 5.2 for the individual fibers.
Position Color
1 Blue
2 Orange
3 Green
4 Brown
5 Slate (Grey)
6 White
7 Red
8 Black
9 Yellow
10 Violet
11 Rose (Pink)
12 Aqua (Light Blue/Cyan)
Position Color
1 Blue
2 Orange
3 Green
4 Brown
5 Slate (Grey)
6 White
7 Red
8 Black
9 Yellow
10 Violet
11 Rose (Pink)
12 Aqua (Light Blue/Cyan)
7
FiberHome Technologies
ADSS-AT-48B1.3 span100m
Max Span: 100m
Max operating weather conditions: 100km/h wind speed and no ice load
Cable cross-section and dimensions
Loose tube
FRP Center Member
UV Fiber
Filler
Tube filling compound
Binder & Wrapping Ripcord
PE inner Sheath
Water blocking tape
Strength member
Water blocking yarn
Outer sheath
8
FiberHome Technologies
ADSS-AT-96B1.3 span100m
Max Span: 100m
Max operating weather conditions: 100km/h wind speed and no ice load
Cable cross-section and dimensions
Loose tube
FRP Center Member
UV Fiber
Tube filling compound
Binder & Wrapping
Ripcord
9
FiberHome Technologies
ADSS-AT-24B1.3 span250m
Max Span: 250m
Max operating weather conditions: 100km/h wind speed and no ice load
Cable cross-section and dimensions
Loose tube
FRP Center Member
UV Fiber
Filler
Tube filling compound
Binder & Wrapping Ripcord
PE inner Sheath
Water blocking tape
Strength member
Water blocking yarn
Outer sheath
10
FiberHome Technologies
ADSS-AT-48B1.3 span250m
Max Span: 250m
Max operating weather conditions: 100km/h wind speed and no ice load
Cable cross-section and dimensions
Loose tube
FRP Center Member
UV Fiber
Filler
Tube filling compound
Binder & Wrapping Ripcord
PE inner Sheath
Water blocking tape
Strength member
Water blocking yarn
Outer sheath
11
FiberHome Technologies
ADSS-AT-24B1.3
Max Span: 400m
Max operating weather conditions: 100km/h wind speed and no ice load
Cable cross-section and dimensions
Loose tube
FRP Center Member
UV Fiber
Filler
Tube filling compound
Binder & Wrapping Ripcord
PE inner Sheath
Water blocking tape
Strength member
Water blocking yarn
Outer sheath
12
FiberHome Technologies
ADSS-AT-48B1.3
Max Span: 400m
Max operating weather conditions: 100km/h wind speed and no ice load
Cable cross-section and dimensions
Loose tube
FRP Center Member
UV Fiber
Filler
Tube filling compound
Binder & Wrapping Ripcord
PE inner Sheath
Water blocking tape
Strength member
Water blocking yarn
Outer sheath
13
FiberHome Technologies
ADSS-AT-24B1.3
Max Span: 1100m
Max operating weather conditions: 100km/h wind speed and no ice load
Cable cross-section and dimensions
Loose tube
FRP Center Member
UV Fiber
Filler
Tube filling compound
Binder & Wrapping Ripcord
PE inner Sheath
Water blocking tape
Strength member
Water blocking yarn
Outer sheath
14
FiberHome Technologies
ADSS-AT-48B1.3
Max Span: 1100m
Max operating weather conditions: 100km/h wind speed and no ice load
Cable cross-section and dimensions
Loose tube
FRP Center Member
UV Fiber
Filler
Tube filling compound
Binder & Wrapping Ripcord
PE inner Sheath
Water blocking tape
Strength member
Water blocking yarn
Outer sheath
15