Professional Documents
Culture Documents
Fisa Tehnica Cosmoplast 500
Fisa Tehnica Cosmoplast 500
COSMOPLAST 500
CA-instant glue (cyanoacrylate)
APPLICATION COSMOPLAST 500, a quickly hardening one-part adhesive, is suitable
for applications in manual and industrial specialized trade. Fields of
application are e.g. the sealing technique, the sewage technique and
PVC- and metal processing industry. The instant glue is especially
used to bond diverse rubber- and PVC-surfaces.
In the window manufacturing, COSMOPLAST 500 is used to bond
APTK (EPDM)-sealing profiles, e.g. with miter cuts, butt joints with
each other and with PVC-hard- and aluminium profiles.
COSMOPLAST 500 can also be used, in connection with the primer
COSMOPLAST 588*, for the bonding of silicone- and TPE-sealings.
COSMOPLAST 500 excels particularly with its short setting time and
has a good cold-, heat- and weather resistance.
TECHNICAL DATA
BASIS modified cyanoacrylate
VISCOSITY acc. to the cone and plate viscometer (3.000 s-1) approx. 20 mPa.s
WORKING INSTRUCTIONS COSMOPLAST 500 is applied directly from the dosing bottle or with
the CA-dosing device onto one side of the surface to be bonded,
which must be first dry and free from grease and dust.
The surfaces are cleaned with COSMOFEN 60 or COSMOFEN 10, if
necessary with acetone, depending on the resistance of the material
surface.
The surfaces to be bonded are joined together within the film formation
time of the adhesive and pressed together until the necessary
functional hardness has been achieved.
COSMOPLAST 500 hardens up influenced by humidity and
temperature. Due to its relatively low viscosity, COSMOPLAST 500
cannot withstand a tension >0,1 mm on the adhesive gap.
For the bonding of bigger gaps, e.g. COSMOPLAST 515 is at your
disposal.
In order to reduce the press time or to accelerate the hardening time of
cyanoacrylate adhesives in thicker adhesive gaps >0,1mm, we
recommend to use the accelerator COSMOPLAST 584.
For the bonding of the outside lying glass bar seal in the window
construction, additionally to the bonding of the miter cuts with instant
glues, the ift-Rosenheim (institute for window technique) also
recommends to bond the profile angle onto the window glass by means
of a neoprene rubber filling or sealing compound, in order to achieve a
permanent tightness during driving rain.
-2-
Weiss Chemie + Technik GmbH & Co.KG, Geschäftsbereich Chemie, Hansastraße 2, D-35708 Haiger,
Tel. +49 (0)2773/815-0, Fax +49 (0)2773/815-200, E-Mail: ch@weiss-chemie.de, http://www.weiss-chemie.de
Technical Data Sheet GB 12/11
STORAGE Store in tightly closed original casks, in a dry place, without direct solar
irradiation. Optimal storage between +2°C and +8°C.
At temperatures between +15°C and +25°C storable for 9 months.
Our instructions for use, processing directives, product- or performance indications, as well as other technical statements are only general
guidelines; they only describe the nature of our products (determined value at the production time) and their performance, but they give no
guarantee in accordance with paragraph 443 of the BGB (Civil Code). Due to the variety of application purposes for each product, and due to a lot of
different particular conditions (e. g. processing parameters, material properties, etc.), the user has to carry out his own individual qualifying tests.
Our consultation in application technique, verbal and in writing, as well as with tests, is offered free of charge and is not legally binding.
Weiss Chemie + Technik GmbH & Co.KG, Geschäftsbereich Chemie, Hansastraße 2, D-35708 Haiger,
Tel. +49 (0)2773/815-0, Fax +49 (0)2773/815-200, E-Mail: ch@weiss-chemie.de, http://www.weiss-chemie.de