Professional Documents
Culture Documents
Hal - HCB 017 - 220413 - NWB - 3749
Hal - HCB 017 - 220413 - NWB - 3749
Page 1 of 1
Actual thickness Shell 8.0 mm Ends min. A/F 8.0 mm Heads / Baffles N/A mm A/F
Corrosion allowance 2.00
Remarks
Hydraulic test pressure 11.55 bar Date of hydraulic test 23/01/2007
Working pressure RID / ADR 7.7 bar Working pressure IMDG 7.7 bar External pressure 0.42 bar
Leak test pressure 7.7 bar Leak test date 02/02/2007
Max. working temperature 55 °C Design temperature range 55°C
Heating system N/A Test pressure N/A bar Maximum working pressure N/A bar
Insulation N/A
Lining materials N/A
Remarks
1 2 3
Make / Model Fort Vale High Pressure Relief Not Fitted
Description High Pressure Relief valve
Total vent capacity 8.951 m³/S
Set pressure / Vacuum 9.38/0.21 Bar
Remarks
Remarks
This certificate is issued to the above client to certify that the tank container described herein, has been manufactured under survey in accordance with
Lloyd’s Register Group Container Certification Scheme and the International Convention for Safe Containers.
Digitally
signed by
On behalf of Danny Graham John Hendry
Inspector to Lloyd’s Register EMEA Date:
2013.04.29
Details of permanent marking attached 09/06 LR A member of the Lloyd’s Register Group 16:58:40
+01'00'
Lloyd's Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's
Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided,
unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms
and conditions set out in that contract.