Download as txt, pdf, or txt
Download as txt, pdf, or txt
You are on page 1of 1

UCELLSELRESEL ( Sel reselection Paramaters )

IDLESINTRASEARCH 5

IDLESINTERSEARCH 5 - For u900 Normally this is modified to 7, For faster Interfreq


from u900 to 2100 During idle mode

CONNSINTRASEARCH 5

UINTERFREQNCELL ( Cell to target Cell offset - connected mode)


sOURCE = CID (F1/F2)
TARGET = CID (U900)
CIOOFFSET = +10

UINTERFREQNCELL ( cell to target Cell Relation - idle mode)

IDLEQOFFSET1SN ( ECNO Offset)

IDLEQOFFSET2SN ( RSCP Offset)

Connected mode: ( If this setting OK lang pag sobrang aga nakaka cause ng Early
Handover eg -10 sa 2D)

UCELLINTERFREQHOCOV

INTERFREQCSTHD2DECN0 -14

INTERFREQCSTHD2FECN0 -12

INTERFREQCSTHD2DRSCP -100

INTERFREQCSTHD2FRSCP -97

UCELLINTERRATHOCOV( If this setting OK lang pag sobrang aga nakaka cause ng Early
Handover eg -10 sa 2D)

INTERRATCSTHD2DECN0 -14

INTERRATCSTHD2FECN0 -12

INTERRATCSTHD2DRSCP -100

INTERRATCSTHD2FRSCP -97

Or

UCELLINTERFREQHOCOV =
CS2DECNO = -12
CS2FECNO = -10
CS2DRSCP = -100
CS2FRSCP = -97

You might also like