Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

2011 Ford Fiesta L4-1.6L Copyright © 2013, ALLDATA 10.

52SS Page 1

Alarm Module: Customer Interest


Antitheft System - PATS Indicator Flashes While Driving
TSB 12-10-6

10/05/12

PASSIVE ANTI-THEFT SYSTEM (PATS) - INDICATOR


LIGHT FLASHES WHILE DRIVING

FORD:
2011-2013 Fiesta

ISSUE
2011-2013 Fiesta Passive Anti-Theft System (PATS) indicator light flashes while driving.

ACTION
Follow the Service Procedure steps to correct the condition.

SERVICE PROCEDURE

1. Reprogram the Remote Function Actuator (RFA) to the latest software calibration level using the IDS release 81.02 and higher. This new
calibration is not included in the IDS 2012.9 DVD. Calibration files may also be obtained at the website.

2. After reprogramming the RFA module, a DTC may be set in the module that cannot be cleared.

a. If a DTC is set, go to the programmable parameters menu, and choose:

(1) Keyless Entry

(2) Start

b. There will be two parameters displayed that are both titled - Remote Function Actuator.

(1) Ensure both of these parameters are set to - Enabled.

(2) After enabling both parameters, the DTC in the RFA will be able to be cleared.

WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage Warranty/ESP coverage limits/policies/prior
approvals are not altered by a TSB. Warranty/ESP coverage limits are determined by the identified causal part and verified using the OASIS part
coverage tool.

OPERATION DESCRIPTION TIME

121006A 2011-2013 Fiesta: 0.3 Hr.


Reprogram The RFA
Module Includes Time To
Enable RFA Parameters
And Clear Codes (Do Not
Use With Any Other Labor
Operations)

DEALER CODING
CONDITION
BASIC PART NO. CODE
19G481 04

Disclaimer

You might also like