Professional Documents
Culture Documents
Nivuflow750 PR en
Nivuflow750 PR en
NivuFlow 750
2
Flow measurement systems at the highest
technical level
Typical Applications
WWTPs, channel networks, discharge constructions, industrial wastewater
networks, measurement places for billing, intakes, drainage lines, return sludge
lines, recirculation lines and many more
3
NivuFlow 750
The complete flow measurement system consists of the NivuFlow Your benefits
750 transmitter and the appropriate sensors. + Absolutely zero point stable and
For flow velocity measurement starting at flow levels as low as 3 cm drift-free sensors
up to several meters in pipes, flumes and channels of various + Low installation expenses through
shapes and dimensions there is a wide selection of sensors perfectly matched mounting
available: flow velocity sensors with and without integrated flow accessories
level measurement as well as air-ultrasonic flow level sensors. + Installation under process conditions
+ Various sensor constructions
guarantee the best solution for
each application
+ Digital signal transmission for error-
free connections over long distances
+ Ex approval Zone 1
Air-ultrasonic sensor
for level measurement,
installed in flume crown
4
Mini Sensor family for small channels Sensors POA/CS2 for medium and large channels
Flow velocity sensor CSM Flow velocity sensor CSM-D Water-Ultrasonic Sensors, Type POA Pipe Sensors
Type POA
22.5 Slotted holes for fastening on pipe mounting system 17.5 45°
15.5
24
21
movable
(with stop ball valve)
ø35
24
40
120 210
G1½”
SW55
ø10.4
18
25
18
30
22
18
18
M16
45°
17
101.5 6 183 12 90°
SW50
68.5
12
237
320
22
cable direction
332
M16x1.5
33
40° 74.8
3 335
316,5 Type CS2
Countersunk holes DIN66-5 (d1=6.5 mm) for direct fastening
Slotted holes for fastening on pipe mounting system 40°
30
22
43
movable
24
40
28
332
Ø 35
248 52
304.5 8 G1½"
Electronic Box, Type EBM
22
238
Air-Ultrasonic Level Sensor, Type OCL
68.5
255 49
84
24
40
36
Retaining
element
7.5 295 17.5 180° to flow
320 direction
30
430 5 M16x1.5
ø6.5 ø6.5
74.8
Dimensions in mm Dimensions in mm
Flow velocity sensor Type CSM, CSM-D Measurement • cross correlation with digital pattern detection
Measurement principle cross correlation detecting the real flow profile principle for flow velocity measurement
Minimum fill level CSM: 3 cm, CSM-D: 5.5 cm • ultrasonic transit time for level measurement
Protection IP68 • piezoresistive pressure meas. for level measurement
Ex-Approval (optional) II 2 G Ex ib IIB T4 Gb Meas. range (v) -100 cm/s to +600 cm/s
Measurement range -100 cm/s to +600 cm/s Meas. range (h) pressure 500 cm
Operating temp. -20 °C to +50 °C, -20 °C to +40 °C in Ex Zone 1 ultrasound internal up to 200 cm
Operating pressure CSM: max. 4 bar, CSM-D: max. 1 bar Protection IP68
Number of scan layers max. 16 Ex Approval (optional) II 2 G Ex ib IIB T4 (ATEX), Ex ib IIB T4 Gb (IECEX)
Meas. uncertainty < 1 % of measurement value (v >1 m/s) Operating temp. -20°C to +50°C (-20°C to +40°C in Ex Zone 1)
(per scan layer) < 0.5 % of measurement value +5 mm/s (v <1 m/s) Storing temperature -30°C to +70°C
Zero point drift absolutely stable zero point Meas. uncertainty deviation < 1 % (v > 1m/s), < 0,5 % + 5mm/s (v < 1 m/s)
CSM-D: level measurement - pressure Operating pressure max. 4 bar (combi sensor w. pressure cell max. 1 bar)
Measurement range 0 to 500 cm Cable length up to 100 m, other lengths on request
Zero point drift max. 0.75% of final value Sensor types POA or CS2 (for levels of several meters):
Meas. uncertainty < 0.5 % of final value flow velocity using cross correlation or flow velocity and
Level sensor, Type DSM level, temperature measurement
Measurement principle transit time using air-ultrasound level measurement using water-ultrasound (optional)
Protection IP68 level measurement using pressure (optional)
Ex-approval (optional) II 2 G Ex ib IIB T4 Gb OCL: level measurement using ultrasound
Measurement range 0 to 200 cm Constructions wedge sensor for installation on channel bottom
Meas. uncertainty < ±5 mm or sidewall
Dead zone (starting at mounting plate) 4 cm pipe sensor for installation in pipes
Electronic Box, Type EBM for connection to NIVUS transmitters
Protection IP68 You can find the complete specifications in the instruction manual or on
Ex-approval (optional) II 2 G Ex ib IIB T4 Gb www.nivus.com
5
NivuFlow 750
Screen display
main screen
Screen display
3-D flow profile
6
www
v
Technical Information NivuFlow 750
DIN rail enclosure for easy installation in switching cabinet Field enclosure 232,8
140
52
135
195 74
88 354,8 ca. 130
Dimensions in mm
7
NivuFlow 750
patented
Flow cannot be measured directly. Multiple factors are required to detect the
flow Q: average flow velocity and the flow cross section which leads to the general
formula:
Q = v(average) • A
The flow cross section A is investigated by continuously measuring the filling level
considering the channel shape.
The flow measurement principle The flow velocity is detected by using the particles‘ velocity. Most media contain
as video under: www.nivus.com a certain load of dirt particles or gas bubbles which move in the same velocity as the
liquid itself.
8
Level measurement (h) Flow velocity measurement (v) using cross correlation
Accurate flow measurements require The measurement method used for Considering the beam angle it is
precise and reliable level detection flow velocity determination is based on possible to directly compute the
under all hydraulic conditions. The the principle of ultrasonic reflection. particle velocity and hence the medium
development of a level measurement One of the most modern and most flow velocity from the temporal shift of
system with multiple redundancy is a efficient measurement methods for flow the reflectors.
result of our many years of experien- velocity detection is the NIVUS cross
ce. Combining hydrostatic measure- correlation method. This allows to obtain highly accurate
ment, water-ultrasound and air- readings without the need to perform
ultrasound provides solutions for all Existing reflectors within the medium additional calibration measurements.
measurement tasks. (particles, minerals or gas bubbles) are
scanned using an ultrasonic impulse
External 4- 20 mA level sensors such with a defined angle.
as "i-Series" sensors or NivuBar Plus The resulting echoes are saved subse-
can be connected additionally. quently as images or echo patterns.
1. Scan
Windows 4 to 16
Window 3
Window 2
Window 1
9
NivuFlow 750
Latest Technologies
Based on the latest hydraulic models, + Scientifically tested, channel-
the NIVUS-COSP system computes a specific mathematical real-time
dense measurement network covering flow models
the entire flow cross section from the + Calculation of flow velocity
individual measurement spots. distributions in proximity to walls
and horizontal velocity profiles
The NivuFlow 750 provides options for + Velocity integration covering the
remote maintenance, remote diagnos- entire cross section
tics and the flexible integration into pro- + Ideal to investigate average flow
cess conducting systems and telecon- velocities in flumes with hydraulic
trol networks. disturbances
Technical Information
110
75
70
Dimensions in mm
Power supply 12 V DC, max. power consumption 9 W (typ. 7 W), supplied by transmitter
Protection IP20
Ex approval iXT ATEX and IECEx, ATEX: TÜV14ATEX142076, IECEx: TUN14.0014
Inputs 1 (optional 2) x analog 4-20 mA loop-powered sensor connection Ex ib Gb IIB, one of them HART compatible
2 (optional 4) x sensor connection Ex ib Gb IIB with RS485 interface
Outputs RS 485 to transmitter
You can find the complete specifications in the instruction manual or on www.nivus.com
10
Perfect solutions even under diffcult conditions
Your benefits
+ Accurate and reliable measurement results
+ Perfectly dimensioned measurement systems
+ Saves costs thanks to quick and easy installation and
commissioning procedures
+ Low personnel expenses through integrated systems
+ One competent contact person for all components
750
NivuFlow
Q1/Q2/Q3/Q total
Q1
Q3
Q2
Q total
11
NIVUS GmbH
Im Taele 2
75031 Eppingen, Germany
Phone: +49 (0)7262 9191-0
Fax: +49 (0)7262 9191-999
info@nivus.com
www.nivus.com
NIVUS AG
Burgstrasse 28
8750 Glarus, Switzerland
Phone: +41 (0)55 6452066
Fax: +41 (0)55 6452014
swiss@nivus.com
www.nivus.com
NIVUS Austria
Mühlbergstraße 33B
3382 Loosdorf, Austria
Phone: +43 (0)2754 567 63 21
Fax: +43 (0)2754 567 63 20
austria@nivus.com
www.nivus.com
NIVUS Sp. z o.o.
ul. Hutnicza 3 / B-18
81-212 Gdynia, Poland
Phone: +48 (0)58 7602015
Fax: +48 (0)58 7602014
poland@nivus.com
www.nivus.pl
NIVUS France
14, rue de la Paix
67770 Sessenheim, France
Phone: +33 (0)3 88071696
Fax: +33 (0)3 88071697
france@nivus.com
www.nivus.fr
NIVUS Ltd.
Head office UK:
Wedgewood Rugby Road
Weston under Wetherley
Royal Leamington Spa
CV33 9BW, Warwickshire, UK