Professional Documents
Culture Documents
NFC-Institute of Engineering & Technology, Multan: Do Not Start Without Reading Instructions
NFC-Institute of Engineering & Technology, Multan: Do Not Start Without Reading Instructions
Examination: B.Sc. Electrical Engineering, Semester 8th, Final Practical Exam, 2020 (Session: 2016-2020)
Department: ELECTRICAL ENGINEERING
Subject: Power System Protection Section: P1
Course Code: PE -421 Time Allowed: 90 min
Max Marks: 50 Date: 17-08-2020
Course Instructor: Engr Anam Shabeer
1 Design a SLD with all the required components on ETAP according to following 1 ,3 &
(a) instructions. 10 4
(b) Introduce fault on this system. Calculate and Display minimum and maximum fault 10
current values on SLD using short circuit analysis.
(c) Arrange the components required for differential protection and after introducing fault 10
perform the differential protection of transformer by selecting appropriate relay/
relays and other protective devices. Also set pickup and time settings.
Write down detailed procedure and conclusion on A4 pages.
NOTE:
Attach pictures of the following Total =
Load flow Diagram 30
Short circuit Analysis ( for min and max fault current )
Sequence of operations
2 Viva 20 1-5