Professional Documents
Culture Documents
Loctite 242: Product Description Technology
Loctite 242: Product Description Technology
LOCTITE® 242®
August-2018
75
TYPICAL PROPERTIES OF UNCURED MATERIAL
°C
C
22
40 °
% Strength @ 22 °C
bolts using Activator SF 7471™ or SF 7649™ and tested 75
according to ISO 10964.
100 50
% of Full Strength on Steel
75 25
50 0
F 7471™ 0 100 120 150
Activator S
™
Temperature, °C
49
76
25
SF
r Heat Aging
ato
or
ctiv
at
0
1min 5min 10min 30min 1h 3h 6h 24h 125
Cure Time
% Initial Strength @ 22 °C
°C
100
100
TYPICAL PERFORMANCE OF CURED MATERIAL
Adhesive Properties 120 °C
75
After 1 hour @ 22 °C
Breakaway Torque, ISO 10964: 50
3/8 x 16 steel nuts (grade N·m 5.6 to 17LMS 150 °C
2) and bolts (grade 5) (lb.in.) (50 to 150)
25
Prevail Torque, ISO 10964:
3/8 x 16 steel nuts (grade N·m 1.7 to 6.8LMS 0
2) and bolts (grade 5) (lb.in.) (15 to 60) 0 100 500 1000 3000 5000
Exposure Time, hours
After 24 hours @ 22 °C
Breakaway Torque, ISO 10964: Chemical/Solvent Resistance
3/8 x 16 steel nuts (grade N·m 7.9 to 17LMS Aged under conditions indicated and tested @ 22 °C.
2) and bolts (grade 5) (lb.in.) (70 to 150)
% of initial strength
3/8 x 16 cadmium nuts and bolts N·m 1.1 to 6.8LMS
(lb.in.) (10 to 60) Environment °C 100 h 500 h 1000 h
3/8 x 16 zinc nuts and bolts N·m 2.3 to 6.8LMS Motor oil (MIL-L-46152) 125 100 100 100
(lb.in.) (20 to 60) Unleaded gasoline 22 100 100 95
M10 black oxide steel N·m *8 to 19LMS
Leaded Gasoline I 22 100 100 100
nuts and bolts (lb.in.) (71 to 168)
Brake fluid 22 100 100 100
Ethanol 22 100 100 95
Prevail Torque, ISO 10964:
Acetone 22 100 100 85
3/8 x 16 steel nuts (grade N·m 2.8 to 6.8 LMS
2) and bolts (grade 5) (lb.in.) (25 to 60) 1,1,1 Trichloroethane 22 100 100 90
3/8 x 16 cadmium nuts and bolts N·m 0.5 to 4.5LMS Water/glycol 50/50 87 80 75 70
(lb.in.) (4 to 40) DEF (AdBlue® ) 22 105 95
3/8 x 16 zinc nuts and bolts N·m 1.1 to 4.5LMS
(lb.in.) (10 to 40)
GENERAL INFORMATION
This product is not recommended for use in pure oxygen
and/or oxygen rich systems and should not be selected as
a sealant for chlorine or other strong oxidizing materials.
TYPICAL ENVIRONMENTAL RESISTANCE For safe handling information on this product, consult the
Cured for 24 hours @ 22 °C Safety Data Sheet (SDS).
Breakloose Torque, ISO 10964:
M10 steel nuts and bolts
Loctite Material SpecificationLMS In case products are delivered by Henkel Colombiana, S.A.S. the following
LMS dated October -16, 1995 (*October 7, 1999). Test disclaimer is applicable:
reports for each batch are available for the indicated The information provided in this Technical Data Sheet (TDS) including the
recommendations for use and application of the product are based on our
properties. LMS test reports include selected QC test knowledge and experience of the product as at the date of this TDS. Henkel is,
parameters considered appropriate to specifications for therefore, not liable for the suitability of our product for the production processes
customer use. Additionally, comprehensive controls are in and conditions in respect of which you use them, as well as the intended
place to assure product quality and consistency. Special applications and results. We strongly recommend that you carry out your own
prior trials to confirm such suitability of our product.
customer specification requirements may be coordinated Any liability in respect of the information in the Technical Data Sheet or any other
through Henkel Quality. written or oral recommendation(s) regarding the concerned product is excluded,
except if otherwise explicitly agreed and except in relation to death or personal
injury caused by our negligence and any liability under any applicable mandatory
product liability law.
Reference 1.7