TM 10-3930-675-24-2TRANSMISSION CALIBRATION0225 00THIS WORK PACKAGE COVERS Calibration
INITIAL SETUP Maintenance Level References Direct Support TM 10-3930-675-
10CALIBRATIONNOTECalibration procedures and checks must be performed if any of the following maintenance action shave occurred :Transmission ECM replaced or disconnected Transmission oil replaced Repairs or adjustment made to transmission transmission assembly replaced Access to Calibration Menus.1.a.Turn master battery switch to ON position .b .Turn ignition ON. c. Place transmission shift control lever in Neutral (N) position .d. Apply parking brake. E Start engine and operate at idle speed .f Wait for transmission oil temperature to reach operating range of 131 to 194F (55 to 90C).g. Select KALMAR service menu on driver's Electronic Control System (ECS) display screen and press "Enter .h. Enter calibration program access number "13221" and press "Enter".i. Press right arrow button to locate "CALIBR GEAR BOX" menu, then press "Enter".0225 00-1