Professional Documents
Culture Documents
Edison Opto - PLCC - 3433 0.2W RGB 6PIN - 2T15X2M100037SA1 - Eng - V1 (3-RD-01-G0507)
Edison Opto - PLCC - 3433 0.2W RGB 6PIN - 2T15X2M100037SA1 - Eng - V1 (3-RD-01-G0507)
Edison Opto - PLCC - 3433 0.2W RGB 6PIN - 2T15X2M100037SA1 - Eng - V1 (3-RD-01-G0507)
2T15X2M100037SA1
Ultra high reliability and luminous efficacy ,PLCC
LED Series are optimized to be used as lighting for
automotive signal lighting designs or signboard.
Automotive
Lighting
Applications :
Automotive Interior Lighting
Features :
Package: Ag Plated 6 pad design package with silicone resin
Dimension: 3.4 mmx3.3 mm
View Angle: 120°
Color: λdom=620nm(Red),λdom=525nm(Green),λdom=465nm(Blue)
ESD: 2 kV acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2)
MSL: Level 2
Qualifications: The product qualification test based on the guidelines of AEC-Q102
Copyright © 2020 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 1 1
www.edison-opto.com
Table of Contents
Copyright © 2020 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 1 2
www.edison-opto.com
General Information
2 T 15 X2 M1 00 03 7 S A 1
X1 X2 X3-X4 X5-X6 X7-X8 X9-X10 X11-X12 X13 X14 X15 X16
X16
Serial Number
- -
Copyright © 2020 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 1 3
www.edison-opto.com
Absolute Maximum Ratings
Absolute maximum ratings
Value
Parameter Symbol Units
Red Green Blue
Forward Current IF 30 30 30 mA
Pulse Forward Current (tp<=100μs, Duty cycle=0.25) Ipulse 100 100 100 mA
Reverse Current IR 10 μA
Reverse Voltage VR 10 V
Notes: Proper current derating must be observed to maintain junction temperature below the maximum at all time.
Characteristics
IF = 20 mA; TJ = 25 °C
Value
Parameter Symbol Units
Red Green Blue
min. 5 5 5
Forward Current Typ. IF 20 20 20 mA
max. 30 30 30
min. 616 520 460
Dominant Wavelength Typ. λdom 620 525 465 nm
max. 624 530 470
min. 1.90 2.70 2.70
Forward Voltage Typ. VF 2.05 3.00 3.00 V
max. 2.35 3.30 3.30
Electrical thermal resistance
junction/solder point with Typ. 60 105 75
RthJS elec. K/W
efficiency ηe = 30 %(Red), max. 72 126 90
ηe = 22 %(Green),ηe = 30 %(Blue)
Copyright © 2020 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 1 4
www.edison-opto.com
Luminous Intensity Characteristic
Luminous Intensity Characteristics, IF=20mA , TJ=25˚C
BA 1800 2240
Green 2T15X2M100037SA1
BB 2240 2800
T2 355 450
Blue
U1 450 560
Note:
The luminous intensity performance is guaranteed within published operating conditions. Edison Opto maintains a tolerance of ±10%
on intensity measurements.
Copyright © 2020 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 1 5
www.edison-opto.com
Wavelength & Voltage Bin Structure
Color Group Min. Wavelength (nm) Max. Wavelength (nm) Min. Voltage (V) Max. Voltage (V)
E 1.90 2.05
F 616 620 2.05 2.20
G 2.20 2.35
Red
I 1.90 2.05
J 620 624 2.05 2.20
K 2.20 2.35
A 2.70 2.90
B 520 525 2.90 3.10
C 3.10 3.30
Green
D 2.70 2.90
E 525 530 2.90 3.10
F 3.10 3.30
A 2.70 2.90
B 463 467 2.90 3.10
C 3.10 3.30
Blue
D 2.70 2.90
E 467 471 2.90 3.10
F 3.10 3.30
Note:
Forward voltage measurement allowance is ± 0.1V.
Dominant wavelength Measurement Allowance is ±1nm.
Copyright © 2020 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 1 6
www.edison-opto.com
Characteristic Curves
Color Spectrum
IF =20 mA ; TJ = 25 °C
Beam Pattern
IF =20 mA ; TJ = 25 °C
0° 10°
20°
1.0
Normalized Relative Intensity
30°
40°
50°
0.5 60°
70°
80°
0 90°
-90° -60° -30° 0° 0.5 1.0
Radiation Angle
Copyright © 2020 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 1 7
www.edison-opto.com
Relative Foward Voltage Relative Luminous Intensity
VF/VF(20 mA) = f(VF); TJ = 25 °C Iv/Iv(20 mA) = f(Iv); TJ = 25 °C
Copyright © 2020 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 1 8
www.edison-opto.com
Relative Forward Voltage Relative Luminous Intensity
VF/VF(25 °C) = f(VF); IF = 20 mA Iv/Iv(25 °C) = f(Iv); IF = 20 mA
Copyright © 2020 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 1 9
www.edison-opto.com
Maximum Current vs. Temperature
3 Chip on Red/Green/Blue
Ts
Copyright © 2020 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 1 10
www.edison-opto.com
Mechanical Dimensions
(4) (1)
(5) (2)
(6) (3)
Solder Pad
Solder Resist
Notes:
1. All dimensions are measured in mm.
2. Tolerance : ± 0.1 mm
3. Approximate Weight : 38.0 mg
Copyright © 2020 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 1 11
www.edison-opto.com
Reflow Profile
The following reflow profile is from IPC/JEDEC J-STD-020D which provided here for reference.
Reflow Profiles
Copyright © 2020 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 1 12
www.edison-opto.com
Product Packaging Information
Copyright © 2020 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 1 13
www.edison-opto.com
Cautions
(1) Moisture monitoring is vital during the storage of LEDs for if too much moisture is absorbed, interface
delamination and optical performance degradation will occur. Therefore, products should be packed
in moisture-proof aluminum bags so as to reduce moisture absorption to the lowest degree during
transportation and storage. Included moisture-proof aluminum bag are the key indicators that they will
change from brown to azure if bags are invaded by moisture.
(2) Soldering process in compliance with the range of the conditions stated above should be conducted
after opening the moisture-proof aluminum bag. The rest LEDs should be stored in a hermetically sealed
container, silica gel desiccants included. And the original moisture-proof aluminum bags are recommended.
(3) If the “Period After Opening” storage time is too long or silica gel desiccants don’t maintain blue any more,
baking process should be done once.
Copyright © 2020 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 1 14
www.edison-opto.com
Revision History
Edison Opto is a leading manufacturer of high power LED and a solution provider experienced
in LDMS. LDMS is an integrated program derived from the four essential technologies in LED
lighting applications- Thermal Management, Electrical Scheme, Mechanical Refinement, Optical
Optimization, to provide customer with various LED components and modules. More Information
about the company and our products can be found at www.edison-opto.com
Copyright © 2020 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 1 15
www.edison-opto.com