Professional Documents
Culture Documents
DOE Question Paper
DOE Question Paper
Fourth Semester
Operations Management
(Regulations 2013)
PART B — (5 13 = 65 marks)
Or
(b) With suitable illustrations explain how will you conduct single factor
experiment. (13)
12. (a) Explain the principles of test of means and EMS Rules. (13)
Or
(b) How will you design and analyses of multi-factor experiment? Give
suitable examples. (13)
13. (a) What are blocking and confounding in DOE? Explain the steps in partial
confounding. (13)
Or
(b) With a suitable illustration show the 2k design and fit a First order model
using RSM designs. (13)
14. (a) Discuss the comparison of Classical and Taguchi’s approach with an
suitable example. (13)
Or
(b) Discuss the procedure of modifying OA and Multi response data analysis.
(13)
15. (a) State and explain the principles of robust design. (13)
Or
(b) Write short notes on :
(i) S/N Ratios. (6)
(ii) Objective functions in Robust Design. (3)
(iii) Fraction Defective Analysis. (4)
PART C — (1 15 = 15 marks)
16. (a) Assume that we have the data from L8 OA experiment with interactions
as given in Table 1 Develop
(i) Data Analysis using response graph method (8)
(ii) Data Analysis using ANOVA. (7)
Table 1 Data of cotton
Expt No Factors/Columns Response
D C CD A AD B E R1 R2 R3
1 2 3 4 5 6 7
1 1 1 1 1 1 1 1 11 4 11
2 1 1 1 2 2 2 2 4 4 4
3 1 2 2 1 1 2 2 4 1 14
4 1 2 2 2 2 1 1 4 0 8
5 2 1 2 1 2 1 2 9 8 4
6 2 1 2 2 1 2 1 4 1 1
7 2 2 1 1 2 2 1 1 4 4
8 2 2 1 2 1 1 2 14 4 8
Or
2 BS2173
(b) An Industrial Engineer has studied the effect of speed (B) feed (C) and
Depth of Cut (A) on the surface finish of a machined component using a
three-factor factorial design. All the three factors were studied at two-
levels each. The surface roughness measurements (microns) from two
replications are given in Table 2. Analyze the data and draw conclusions
use = 0.05. (15)
Table 2
100 120
0.15 54 41 59 43
52 58 61 55
0.20 86 62 82 65
82 64 75 77
————————
3 BS2173