DMDAMNN224-ECT en Us Letter

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

snhy.

com/DMDAMNN224-ECT

MODEL 3-way, solenoid-operated directional spool valve


DMDAMNN224-ECT CAPACITY: 12 gpm | CAVITY: T-11A

CARTRIDGE CONFIGURATION
This solenoid-operated 3-way, 2-position cartridge is a direct-acting, balanced spool directional valve.
M Control Manual Override

N Spool Configuration Normally Open 2 to 3, CARTRIDGE TECHNICAL DATA


Closed 1 to 2
Cavity T-11A
N Seal Material Buna-N
Series 1
224 Coil DIN 43650-Form A,
Capacity 12 gpm
24 VDC
Maximum Operating Pressure 5000 psi

MANIFOLD CONFIGURATION Maximum Valve Leakage at 110 SUS (24 cSt) 5 in³/min.@3000 psi

(none) Modifier 6061-T651 Aluminum, Manual Override Force Requirement 5 lbs/1000 psi @ Port 1
Buna-N
Manual Override Stroke .10 in.

Response Time - Typical 50 ms


PORT HEADINGS AND SIZES
Switching Frequency 15,000 max. cycles/hr
Modifiers Ports
Solenoid Tube Diameter .75 in.
ECT, /10, /11, /S, /S3 All Ports: 1/4" BSPP;
Valve Hex Size 7/8 in.

NOTES Valve Installation Torque 30 - 35 lbf ft


Please verify cartridge clearance requirements when
choosing a Sun manifold. Different valve controls and Seal kit - Cartridge Buna: 990-411-007
coils require different clearances.
Seal kit - Cartridge EPDM: 990-411-014
An additional 2.00 inches (50,8 mm) beyond the valve
extension is needed for coil installation and removal. Seal kit - Cartridge Viton: 990-411-006

Important: Carefully consider the maximum system Seal and nut kit - Coil Viton: 990-770-006
pressure. The pressure rating of the manifold is
Model Weight 1.25 lb.
dependent on the manifold material, with the port
type/size a secondary consideration. Manifolds
constructed of aluminum are not rated for pressures MANIFOLD TECHNICAL DATA
higher than 3000 psi (210 bar), regardless of the port
type/size specified. Body Type Line mount

Interface None

Body Features Ninety degree

Mounting Hole Diameter .34 in.

Mounting Hole Depth Through


Mounting Hole Depth Through

Mounting Hole Quantity 2

Open Cavities 1

Cavity T-11A

Port Size 1/4" BSPP

Model Weight 0.75 lb.

Copyright © 2002-2021 Sun Hydraulics. All rights reserved.

You might also like