Professional Documents
Culture Documents
2 Injectors: 2.1 Summary of Components - Fuel Distribu Tor With Injectors
2 Injectors: 2.1 Summary of Components - Fuel Distribu Tor With Injectors
2 Injectors: 2.1 Summary of Components - Fuel Distribu Tor With Injectors
2 Injectors
⇒ “2.1 Summary of components - fuel distributor with injectors”,
page 259
⇒ “2.2 Removing and installing the fuel distributor”, page 261
⇒ “2.3 Removing and installing injectors”, page 262
⇒ “2.4 Replacing sealing rings on injector”, page 265
⇒ “2.5 Clean injectors”, page 268
1 - Screw
♦ M6: 9Nm
♦ M8: 20 Nm + 90°
2 - Fuel distributor for injector
FSI
❑ removing and installing
⇒ “2.2 Removing and in‐
stalling the fuel distribu‐
tor”, page 261
3 - Fuel pressure sender -
G247-
❑ Moisten thread and
cone with clean engine
oil
❑ removing and installing
⇒ “5.1 Removing and in‐
stalling fuel pressure
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
senderwithG247
respect”,
to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�
page 283
❑ 27 Nm
4 - Support ring
❑ Replace after disas‐
sembly
5 - O-ring
❑ Replace after disas‐
sembly
6 - Distance ring
❑ Replace after disas‐
sembly
7 - Injector
❑ pay attention to correct
installation position
❑ removing and installing ⇒ “2.3.1 Removing and installing the FSI injectors”, page 262
2. Injectors 259
Kodiaq 2017 ➤ , Superb III 2015 ➤
1.8/132; 2.0/132; 162; 206 kW TSI engine - Edition 10.2016
8 - Inserted washer
9 - Combustion chamber sealing ring
❑ replace after removing the injector
10 - Inlet connections
❑ for high pressure line
❑ Replace after disassembly
❑ Moisten thread with clean engine oil
❑ 40 Nm
11 - Screw
❑ 5 Nm
12 - High pressure line
❑ Moisten thread with clean engine oil
❑ 27 Nm