Professional Documents
Culture Documents
Module System Is A Family of Versatile High: Product Information Sheet
Module System Is A Family of Versatile High: Product Information Sheet
Densities 8,9.3, 10, 10.5, 12, 14 PCF 8,10 PCF 8,10,12,14 PCF
1800 SMG, 2300 HPS, 1800 SMG, 2300 HPS, 1800 SMG, 2300 HPS,
Temperatures 2600 HTZ, 3000 2600 HTZ, 3000 2600 HTZ, 3000
Weld Tite (one-shot) Stud Weld Tite (one-shot) Stud Weld Tite (one-shot) Stud
Attachment Tite (pre-welded) Bolt Tite (pre-welded) Bolt Tite (pre-welded) Bolt
system Through Through Through
H-Anchor (no hardware) H-Anchor (no hardware) H-Anchor (no hardware)
The Weld Tite system is a one- The Stud Tite system requires H Anchors are pre-welded
shot system which requires a performing a layout and pre-welding the anchors used in conjunction
welding gun and timer box to install. anchor into place. The module installs with Modules that have no
This system allows for flexible onto the prewelded stud and is secured internal hardware. The fiber
installation as you can place the by tightening down the nut. This system block is slid onto the spears of
module in the spot you want it an allows you to ensure a good weld which the H anchor which allows for
then fire it into place. provides the most secure installation. flexibility of installation.
MaxBlock® Macro Modules are larger pre-built By installing sections of walls and ceilings quickly, there
monolithic fiber module panels which can be can be substantial labor savings. Macro Modules are
manufactured to custom sizes. These larger available in a variety of different temperature grades and
panels can be installed quickly and securely and densities and can be shipped with vapor barriers and
provide a larger monolithic insulating system with coatings already applied.
fewer seams on the hot face and increased Contact us today to discover more about the advantages
densities for better thermal conductivity performance. of a MaxBlok® Macro Module system.
Data are average results of tests conducted under standard procedures and are subject to variation. Results should not be used for specification purposes.
Please refer to the Product Safety Data Sheet (SDS) for recommended work practices and other product safety information.
MaxBlok® Modules. Page 3 of 3