Professional Documents
Culture Documents
Roland Edirol UA-1X Owner Manual
Roland Edirol UA-1X Owner Manual
Information
When you need repair service, call your nearest EDIROL/Roland Service Center or authorized EDIROL/Roland distributor
in your country as shown below.
Owner’s Manual
Av.Santa Fe 2055
http://www.edirol.com/europe INDIA (1123) Buenos Aires STOLLAS S.A.
Deutschland
Rivera Digitec (India) Pvt. Ltd.
409, Nirman Kendra Mahalaxmi
ARGENTINA
Music Sound Light MIDDLE EAST
TEL: 0700 33 47 65 20 TEL: (011) 4508-2700
Flats Compound Off. Dr. Edwin 155, New National Road
France Patras 26442, GREECE BAHRAIN
TEL: 0810 000 371
Moses Road, Mumbai-400011, BRAZIL TEL: 2610 435400
INDIA Moon Stores
Italia TEL: (022) 2493 9051
Roland Brasil Ltda
No.16, Bab Al Bahrain Avenue,
TEL: 02 93778329 Rua San Jose, 780 Sala B HUNGARY P.O.Box 247, Manama 304,
Parque Industrial San Jose
INDONESIA Roland East Europe Ltd. State of BAHRAIN
U. S. A. / CANADA PT Citra IntiRama
Cotia - Sao Paulo - SP, BRAZIL Warehouse Area ‘DEPO’ Pf.83 TEL: 211 005
TEL: (011) 4615 5666
EDIROL Corporation North J1. Cideng Timur No. 15J-150 H-2046 Torokbalint, HUNGARY
Owner’s Manual
America Jakarta Pusat CHILE TEL: (23) 511011 CYPRUS
425 Sequoia Drive, Suite 114 INDONESIA Comercial Fancy II S.A. Radex Sound Equipment Ltd.
Bellingham, WA 98226 TEL: (021) 6324170 IRELAND 17, Diagorou Street, Nicosia,
Rut.: 96.919.420-1
U. S. A. Roland Ireland CYPRUS
Nataniel Cox #739, 4th Floor
TEL: (360) 594-4276 KOREA G2 Calmount Park, Calmount TEL: (022) 66-9426
Bedienungsanleitung
Santiago - Centro, CHILE
FAX: (360) 594-4271 Avenue, Dublin 12
Cosmos Corporation TEL: (02) 688-9540
http://www.edirol.com/ 1461-9, Seocho-Dong,
Republic of IRELAND IRAN
Seocho Ku, Seoul, KOREA MEXICO TEL: (01) 4294444 MOCO, INC.
TEL: (02) 3486-8855 No.41 Nike St., Dr.Shariyati Ave.,
Casa Veerkamp, s.a. de c.v. ITALY
Mode d’emploi
Roberoye Cerahe Mirdamad
Av. Toluca No. 323, Col. Olivar
MALAYSIA de los Padres 01780 Mexico D.F.
Roland Italy S. p. A. Tehran, IRAN
Viale delle Industrie 8, TEL: (021) 285-4169
BENTLEY MUSIC SDN BHD MEXICO
AFRICA 140 & 142, Jalan Bukit Bintang TEL: (55) 5668-6699
20020 Arese, Milano, ITALY
TEL: (02) 937-78300 ISRAEL
Manuale d’uso
55100 Kuala Lumpur, MALAYSIA
TEL: (03) 2144-3333 URUGUAY Halilit P. Greenspoon &
EGYPT Todo Musica S.A. NORWAY Sons Ltd.
Al Fanny Trading Office PHILIPPINES Francisco Acuna de Figueroa 1771 Roland Scandinavia Avd. 8 Retzif Ha’aliya Hashnya St.
9, EBN Hagar A1 Askalany Street, C.P.: 11.800 Kontor Norge Tel-Aviv-Yafo ISRAEL
G.A. Yupangco & Co. Inc.
For EU Countries
This product complies with the requirements of European Directive 89/336/EEC.
2
UA-1X_ALL.book 3 ページ 2003年12月3日 水曜日 午後2時50分
012d 104
• Immediately turn the power off, and • Try to prevent cords and cables from
request servicing by your retailer, the becoming entangled. Also, all cords
nearest Roland Service Center, or an and cables should be placed so they
authorized Roland distributor, as are out of the reach of children.
listed on the “Information” page ..................................................................................................
106
when: • Never climb on top of, nor place heavy
• If smoke or unusual odor occurs objects on the unit.
• Objects have fallen into, or liquid
has been spilled onto the unit; or ..................................................................................................
108c
• The unit has been exposed to rain • Disconnect all cords coming from
(or otherwise has become wet); or external devices before moving
• The unit does not appear to operate the unit.
normally or exhibits a marked ..................................................................................................
change in performance.
..................................................................................................
013
• In households with small children, an
adult should provide supervision until
the child is capable of following all the
rules essential for the safe operation
of the unit.
..................................................................................................
014
• Protect the unit from strong impact.
(Do not drop it!)
..................................................................................................
204
* Microsoft and Windows are registered
trademarks of Microsoft Corporation.
206e
* Screen shots in this documents are reprinted
with permission from Microsoft Corporation.
206j
* Windows® is known officially as:
“Microsoft® Windows® operating system.”
207
* Apple and Macintosh are registered
trademark of Apple Computer, Inc.
209
* MacOS is a trademark of Apple Computer,
Inc.
220
* All product names mentioned in this
document are trademarks or registered
trademarks of their respective owners.
3
UA-1X_ALL.book 4 ページ 2003年12月3日 水曜日 午後2時50分
IMPORTANT NOTES
291a
In addition to the items listed under “USING THE UNIT SAFELY” on page 2–3, please read and observe
the following:
Power Supply Additional Precautions
307 552
• Before connecting this unit to other devices, turn off the • Unfortunately, it may be impossible to restore the contents of
power to all units. This will help prevent malfunctions and/ data that was stored on a storage device (e.g., hard disk) once
or damage to speakers or other devices. it has been lost. Roland
Corporation assumes no liability concerning such
Placement loss of data.
351 553
• Using the unit near power amplifiers (or other equipment • Use a reasonable amount of care when using the unit’s
containing large power transformers) may induce hum. To buttons, sliders, or other controls; and when using its jacks
alleviate the problem, change the orientation of this unit; or and connectors. Rough handling can lead to malfunctions.
move it farther away from the source of interference. 556
352a • When connecting / disconnecting all cables, grasp the
• This device may interfere with radio and television reception. connector itself—never pull on the cable. This way you
Do not use this device in the vicinity of such receivers. will avoid causing shorts, or damage to the cable’s internal
352b elements.
• Noise may be produced if wireless communications devices,
558a
such as cell phones, are operated in the vicinity of this unit. • To avoid disturbing your neighbors, try to keep the unit’s
Such noise could occur when receiving or initiating a call, or volume at reasonable levels. You may prefer to use
while conversing. Should you experience such problems, you headphones, so you do not need to be concerned about
should relocate such wireless devices so they are at a greater those around you (especially when it is late at night).
distance from this unit, or switch them off. 559a
354a • When you need to transport the unit, package it in the box
• Do not expose the unit to direct sunlight, place it near devices (including padding) that it came in, if possible. Otherwise,
that radiate heat, leave it inside an enclosed vehicle, or you will need to use equivalent packaging materials.
otherwise subject it to temperature extremes. Excessive 562
heat can deform or discolor the unit. • Use a cable from Roland to make the connection. If using
355b some other make of connection cable, please note the
• When moved from one location to another where the temper- following precautions.
ature and/or humidity is very different, water droplets • Some connection cables contain resistors. Do not use
(condensation) may form inside the unit. Damage or cables that incorporate resistors for connecting to this
malfunction may result if you attempt to use the unit in unit. The use of such cables can cause the sound level to
this condition. Therefore, before using the unit, you must be extremely low, or impossible to hear. For information
allow it to stand for several hours, until the condensation has on cable specifications, contact the manufacturer of
completely evaporated. the cable.
Maintenance 563
• Unauthorized duplication, reproduction, hiring, and lending
401a
• For everyday cleaning wipe the unit with a soft, dry cloth or prohibited.
one that has been slightly dampened with water. To remove 564
• Before you open the included CD-ROM, you must read the
stubborn dirt, use a cloth impregnated with a mild, non-
“license agreement”. Opening the CD-ROM will be taken
abrasive detergent. Afterwards, be sure to wipe the unit
to mean your acceptance of the license agreement.
thoroughly with a soft, dry cloth.
986
402 • Although Roland has tested numerous configurations, and
• Never use benzine, thinners, alcohol or solvents of any kind,
has determined that on average, a computer system similar
to avoid the possibility of discoloration and/or deformation.
to that described above will permit normal operation of the
Copyright UA-1X, Roland cannot guarantee that a given computer
851 can be used satisfactorily with the UA-1X based solely on the
• Unauthorized recording, distribution, sale, lending, public fact that it meets the above requirements. This is because
performance, broadcasting, or the like, in whole or in part, of there are too many other variables that may influence the
a work (musical composition, video, broadcast, public perfor- processing environment, including differences in mother-
mance, or the like) whose copyright is held by a third party is board design and the particular combination of other devices
prohibited by law. involved.
852a
• When exchanging audio signals through a digital connection
with an external instrument, this unit can perform recording
without being subject to the restrictions of the Serial Copy
Management System (SCMS). This is because the unit is
intended solely for musical production, and is designed
not to be subject to restrictions as long as it is used to record
works (such as your own compositions) that do not infringe
on the copyrights of others. (SCMS is a feature that prohibits
second-generation and later copying through a digital
connection. It is built into MD recorders and other consumer
digital-audio equipment as a copyright-protection feature.)
853
• Do not use this unit for purposes that could infringe on a
copyright held by a third party. We assume no responsibility
whatsoever with regard to any infringements of third-party
copyrights arising through your use of this unit.
4
UA-1X_ALL.book 5 ページ 2003年12月3日 水曜日 午後2時50分
Contents
Features of the UA-1X ............................................................................ 6
Check the Contents of the Package ..................................................... 7
Panel Descriptions ................................................................................. 8
Using the UA-1X ..................................................................................... 9
UA-1X Signal Flow Diagram..................................................................................... 9
Listening to Sound from Your Computer ............................................................. 10
Digitally Recording to MD ...................................................................................... 11
Recording from the AUX Input .............................................................................. 12
English
5
UA-1X_ALL.book 6 ページ 2003年12月3日 水曜日 午後2時50分
What is USB?
USB stands for Universal Serial Bus. It is a new interface used to connect various
peripheral devices to a computer.
USB allows more than one peripheral device to be connected via a single USB cable,
and also allows data to be transmitted more rapidly than conventional serial ports.
Peripherals can also be connected or disconnected with the power turned on, and
the computer will automatically recognize the peripheral that has been plugged in.
(Some peripherals may require settings or other operations to be performed.)
6
UA-1X_ALL.book 7 ページ 2003年12月3日 水曜日 午後2時50分
● UA-1X
fig.01-01
● Owner’s Manual
This is the document you are reading. Keep it at hand for reference when needed.
Digital input/output cables for connecting the MD or DAT recorder are not
included
Although you can use an MD or DAT digital recorder to perform digital recording,
the cables for connecting the recorder to the UA-1X are not included. You will need
to provide these separately.
7
UA-1X_ALL.book 8 ページ 2003年12月3日 水曜日 午後2時50分
Panel Descriptions
fig.01-08_90
1
2 3
8
4
7 6 5
OUTPUT LINE IN
8
UA-1X_ALL.book 9 ページ 2003年12月3日 水曜日 午後2時50分
UA-1X
INPUT
SELECT
USB
OPTICAL PHONES
OUT
Signal flow
* The same jack serves as both the headphone jack and digital output jack.
As soon as you connect the UA-1X to your computer, sound will no longer
be output from the speakers of your computer.
9
UA-1X_ALL.book 10 ページ 2003年12月3日 水曜日 午後2時50分
Stereo set,
Monitor speakers, etc.
External Input jacks Signal flow
(LINE IN, AUX IN)
Audio Cable
OUTPUT
Computer
Stereo
Headphones
USB
connector
Signal flow
Set the desired sampling frequency for recording in the application being used for recording,
then proceed with recording. Available sampling frequencies vary depending on the operating
system used.
fig.table
Frequency
OS 32 kHz 44.1kHz 48 kHz
Mac OS 9/X ✕ ✕ ❍
Windows 98 SE/
Windows Me/ ❍ ❍ ❍
Windows 2000/XP
10
UA-1X_ALL.book 11 ページ 2003年12月3日 水曜日 午後2時50分
Digitally Recording to MD
fig.07-02
Audio Cable
OUTPUT
Computer
USB
connector
OPTICAL
OUT
Signal flow Optical
Digital
cable
DIGITAL INPUT
MD
11
UA-1X_ALL.book 12 ページ 2003年12月3日 水曜日 午後2時50分
INPUT
Computer
Stereo
Headphones
USB
connector
Signal flow
If the input signal level is high (causing the sound to distort), set INPUT SELECT
to “HIGH”.
If you are using a record player, use a player that has a built-in phono
equalizer. If your record player does not have a phono equalizer, output
the sound through a speaker system that has a phono equalizer.
Stereo set
UA-1X (Cassette, record player)
Loop Connection
INPUT LINE OUT
OUTPUT LINE IN
If you connect the UA-1X as shown in the above diagram with another device that
passes the input audio back to the output (e.g., a MD/DAT in recording mode), the
sound will loop between the UA-1X and the other device, causing oscillation and
producing an unexpected high volume. Be aware that such connections can cause
malfunctions or damage your speakers.
12
UA-1X_ALL.book 13 ページ 2003年12月3日 水曜日 午後2時50分
English
Before installing the driver
Deutsch
computer when you install the driver, the driver may not be installed correctly.
In order to use the UA-1X, you must first install the USB Composite Device driver,
the USB Human Interface driver, and the USB Audio Device driver consecutively.
These drivers are included with Windows. If you are using Windows 98, this driver
is provided in the Microsoft Windows CD-ROM, so you will need to have the
Microsoft Windows CD-ROM ready.
(This is not necessary for Windows Me, 2000, or XP.)
Français
What is a driver?
A driver is software that allows an application program running on your computer
to transfer data to and from the UA-1X when it is connected to your computer via
a USB cable.
The driver passes data from the application to the UA-1X, and passes data from the
UA-1X to the application.
fig.05-01.e
Italiano
Application USB
connector
USB
USB cable
Driver
Español
Computer UA-1X
13
UA-1X_ALL.book 14 ページ 2003年12月3日 水曜日 午後2時50分
3
After installing the driver, restart Windows. This unit is equipped with
a protection circuit. A brief
interval (a few seconds) after
Next, you need to make the driver settings. connecting a USB connector is
→ Settings and Checking (p. 19) required before the unit will
operate normally.
14
UA-1X_ALL.book 15 ページ 2003年12月3日 水曜日 午後2時50分
■ Windows Me Users
1
With the UA-1X disconnected from your computer,
English
turn on your computer and start up Windows.
Disconnect all USB cables except for a USB keyboard and
USB mouse (if used).
2
Use a USB cable to connect the UA-1X to your
This unit is equipped with
computer. a protection circuit. A brief
Deutsch
fig.02-03.e interval (a few seconds) after
connecting a USB connector is
3 required before the unit will
Windows will detect the operate normally.
UA-1X, and the “Add New
Hardware Wizard” dialog box
will appear.
Make sure that Automatic search
Some time may be required
for a better driver (Recommended) is selected, and
until this dialog box appears.
Français
click [Next].
4
The search for the driver starts.
5
When the correct driver is found, driver installation
starts. Italiano
fig.02-04.e
15
UA-1X_ALL.book 16 ページ 2003年12月3日 水曜日 午後2時50分
■ Windows 98 Users
Installation must be performed in the order of the USB
Composite Device driver, USB Human Interface Device
driver, and then the USB Audio Device driver. Use the
following procedure to perform the installation.
1
With the UA-1X disconnected from your computer,
turn on your computer and start up Windows.
Disconnect all USB cables except for a USB keyboard and
USB mouse (if used).
2
Insert the Microsoft Windows CD-ROM into your
CD-ROM drive, and use a USB cable to connect This unit is equipped with
a protection circuit. A brief
the UA-1X to your computer. interval (a few seconds) after
connecting a USB connector
is required before the unit
Since some computers are sold with the contents of the will operate normally.
Microsoft Windows CD-ROM already in the hard disk, a
Microsoft Windows CD-ROM may not have been included.
If this is the case, you will be able to install the driver without
the Microsoft Windows CD-ROM
fig.02-05.e
3
A USB Composite Device will
be detected automatically, and
If this dialog box does not
the “Add New Hardware appear, refer to Problems
Wizard” dialog box will appear. related to the USB driver
(p. 111)
Click [Next].
fig.02-06.e
4
When the display asks “What
do you want Windows to
do?”, select “Search for the
best driver for your device.
(Recommended)” and click
[Next].
16
UA-1X_ALL.book 17 ページ 2003年12月3日 水曜日 午後2時50分
fig.02-07.e
5
Check CD-ROM drive, and
English
click [Next].
fig.02-08.e
6
Click [Next].
* Depending on your system, the
Location of driver may differ from
the above illustration, but this is not
a problem.
Deutsch
7
Copying of the file (Driver) will begin.
fig.02-09.e
If the Windows CD-ROM is not
inserted in the CD-ROM drive,
a “Insert Disc” dialog box may
appear. If this occurs, insert the
Français
Microsoft Windows CD-ROM
into the CD-ROM drive, and
click [OK].
fig.02-10.e
8
When installation of the USB
Composite Device driver is
Italiano
finished, the following dialog
box will appear. Click [Finish].
fig.02-11.e
17
UA-1X_ALL.book 18 ページ 2003年12月3日 水曜日 午後2時50分
fig.02-12.e
10
When installation of the USB
Human Interface Device
driver is finished, the
following dialog box will
appear. Click [Finish].
fig.02-13.e
12
When installation of the USB Depending on your system,
the cursor may stay in the
Audio Device driver is
hourglass shape for several
complete, a dialog box like the minutes after you click [OK],
one shown here will appear. but you should simply keep
Click [Finish]. waiting.
18
UA-1X_ALL.book 19 ページ 2003年12月3日 水曜日 午後2時50分
English
1
Click the Windows Start button, and select Settings -
Control Panel. (In Windows XP, click the Start button and
then click Control Panel.)
2
Access “Sound and Multimedia Properties”
(for Windows 98, “Multimedia Properties”).
Deutsch
If using Windows XP/2000/Me:
In Control Panel, double-click the Sounds and Multimedia
icon to open the “Sounds and Multimedia Properties”
dialog box.
* If the Sound and Multimedia Properties icon is not shown
Windows XP:
In the Control Panel, click Sounds, Speech, and Audio
Devices. Next, click Sounds and Audio Devices to access
the “Sound and Audio Devices Properties” dialog box.
Français
Windows Me:
In the left frame, click View all Control Panel options.
Windows 98 users:
In Control Panel, double-click the Multimedia icon to open
the Multimedia Properties dialog box.
5
Click [OK] to complete the settings.
Depending on your system,
USB Audio Device will be
shown a number added, ex.
“USB Audio Device (1).”
19
UA-1X_ALL.book 20 ページ 2003年12月3日 水曜日 午後2時50分
1
Click the Windows Start button, and select Programs If Volume Control is not
(In Windows XP, All Programs) – Accessories – installed on your computer,
use Add/ Remove
Entertainment – Volume Control to start it up.
Applications in the Control
Windows XP users Panel to install it. For details
fig.05-16ae_30 on installation, refer to the
Windows owner’s manual
or Help.
Windows Me users
fig.02-17.e.eps
20
UA-1X_ALL.book 21 ページ 2003年12月3日 水曜日 午後2時50分
2
You can raise or lower the slider to adjust the volume
By turning up the volume
of the UA-1X. The following items can be set. control you can output the
English
sound from your computer
through the UA-1X at the
best audio quality.
USB Audio Adjust the volume of the analog outputs
(Speaker) (line output and headphone output).
The digital output will not change (*1).
CD Player Adjust the “CD Music” volume for the If Mute is checked, or if the
CD-ROM drive of your computer (*2). slider is in the lowest position,
Wave Adjust the volume that is output from no sound will be output from
the audio output device “USB Audio the UA-1X.
Device.” The digital output and analog
Deutsch
output will change.
SW Synth Adjust the volume of the software
synthesizer built into Windows.
If the UA-1X is connected,
* 1 Depending on your Windows version, this may be displayed as Windows will not output
an “analog connector.” sound from your computer's
* 2 If the playback of the CD does not change when you adjust this speakers. Since the sound from
volume, change the WAVE volume. your computer will be output
from the UA-1X's headphone
jack or line output jacks rather
Français
than from your computer's
speakers, you will need to
connect headphones or
monitor speakers to the
UA-1X. Alternatively, you
can connect the UA-1X's line
output jacks to the LINE input
jacks of your computer.
Italiano
Español
21
UA-1X_ALL.book 22 ページ 2003年12月3日 水曜日 午後2時50分
When using your computer’s CD-ROM drive to play an audio CD, or when
playing background music for games with the UA-1X
Windows Me users:
4. Click the Properties tab, and in Digital CD Playback, check the “Enable
digital CD audio for this CD-ROM device” item.
Windows 98 users:
2. Click the CD Music tab, and check the “Enable digital CD audio for this
CD-ROM device” item.
* Depending on your system, playback may still not be possible. For details, refer to
information provided by your computer’s manufacturer. If you are using a PC-card
(PCMCIA) type CD-ROM drive, playing back WAVE data from a CD-ROM or playing
an audio CD may cause interrupted sound, or possibly no sound at all.
22
UA-1X_ALL.book 23 ページ 2003年12月3日 水曜日 午後2時50分
* If you are a Windows user, refer to Connections and Driver Installation (Windows)
(p. 13).
English
When you start up your computer with the UA-1X connected, the computer may
become unstable. If this occurs, start up your computer before connecting the
UA-1X, and connect the UA-1X after start-up.
Deutsch
What is a Driver?
A driver is software that allows an application program running on your computer
to transfer data to and from the UA-1X when it is connected to your computer via
a USB cable.
The driver passes data from the application to the UA-1X, and passes data from
the UA-1X to the application.
fig.05-01.e
Français
Application USB
connector
USB
USB cable
Driver
Italiano
Computer UA-1X
23
UA-1X_ALL.book 24 ページ 2003年12月3日 水曜日 午後2時50分
1
With the UA-1X disconnected, start up the Macintosh.
Disconnect all USB cables except for a USB keyboard and USB
mouse (if used).
2
Exit all currently running software (applications).
If you are using virus checking or similar software, be sure
to exit it as well.
fig.03-02.e
3
After starting up Mac
OS, select Apple
System Profiler from
the Apple menu.
The “Apple System
Profiler” dialog box will
appear.
4
Click the Devices and Volumes tab.
5
Choose Update all information from the Commands
menu.
24
UA-1X_ALL.book 25 ページ 2003年12月3日 水曜日 午後2時50分
7
Wait for approximately five seconds.
UA-1X uses a driver included with Mac OS.
English
While you are waiting, the screen display will not change,
but the UA-1X is being detected. Do not touch the mouse
or keyboard.
fig.03-04.e
8
In order to check that
detection has been
completed, once again
Deutsch
go to Apple System
Profiler, and select
Update all information from the Commands menu.
In the USB area, three audio devices will be displayed.
Français
If they are not displayed correctly, disconnect the UA-1X,
wait for about ten seconds, and then repeat the procedure
from step 2.
1
From the Apple
menu, select
Control Panels -
Sound to open the
Español
Sound dialog.
2
Click the Speakers
tab or Speaker
Settings.
25
UA-1X_ALL.book 26 ページ 2003年12月3日 水曜日 午後2時50分
fig.03-06.e
3
Turn down the volume The contents of the display
on the UA-1X, and on will differ depending on your
operating system and data.
your audio equipment,
then click [Start Test].
fig.03-07.e
4
Use the [Main Volume]
bar to adjust the volume.
When you are finished, Depend on the your OS
version, there is no Main
click [Stop Test]. Volume bar. In that case, use
Test sounds are output from the Volume bar in the Output
to adjust the volume.
left to right, along with what
appears on the screen.
fig.03-08.e
5
In the Sound dialog box,
If USB audio is not displayed,
click the Input tab.
close the “Sound” dialog box,
In Choose a source for and disconnect the UA-1X’s
sound input, select USB cable from the Macintosh.
USB audio. Perform the driver installation
once again.(p. 24)
* Do not check “Play sound
through output device.”
26
UA-1X_ALL.book 27 ページ 2003年12月3日 水曜日 午後2時50分
6
When you are finished making settings, close the
“Sound” dialog box.
English
Select Quit from the File menu.
Deutsch
• The standard driver that comes with Mac OS is not ASIO compatible.
Français
Italiano
Español
27
UA-1X_ALL.book 28 ページ 2003年12月3日 水曜日 午後2時50分
2
Open the System Preference dialog box and click
Sound.
fig.macX-1
3
In the Sound Effects
tab, click Play alerts
and sound effects
through and choose
USB Audio CODEC
as the playback device
for sound effects.
figmacX-2, macOSX-3.
4
Click the Output tab,
and choose USB
Audio CODEC as the
device that will output
sound.
28
UA-1X_ALL.book 29 ページ 2003年12月3日 水曜日 午後2時50分
figmacX-2, macOSX-3.
5
If the Input tab is
English
displayed, choose USB
Audio CODEC as the
device for inputting
sounds.
Deutsch
Please check the following before you use your software.
• Use a USB cable to connect the UA-1X to your computer before you
start up your software.
• Do not disconnect the UA-1X's USB cable while your software is
running.
• Exit your software before you disconnect the UA-1X's USB cable.
• Turn off the Sleep settings of your Macintosh.
• The UA-1X will not operate in the Mac OS X Classic environment.
You can not use it if the Classic environment is running.
Français
■ Audio Software Settings
Use a USB cable to connect the UA-1X to your computer
before you start up your software.
same time due to high load on the CPU. However, the noise should not be in the
recording itself. Such noise should only be found in the playback signal.
• The standard driver that comes with Mac OS is not ASIO compatible.
29
UA-1X_ALL.book 30 ページ 2003年12月3日 水曜日 午後2時50分
MEMO
UA-1X_ALL.book 31 ページ 2003年12月3日 水曜日 午後2時50分
* Wenn Sie ein Macintosh-Anwender sind, lesen Sie bitte Anschlüsse und Treiberinstallation
(Macintosh) (S. 43).
English
Vor der Installation des Treibers
* Das UA-1X kann unter Windows 95 oder Windows NT nicht verwendet werden.
* Beenden Sie alle anderen Anwendungen unter Windows, bevor Sie den UA-1X-Treiber
installieren.
* Wenn Sie das UA-1X und andere USB-Geräte mit Ihrem Computer verbinden und
gleichzeitig verwenden möchten, trennen Sie alle USB-Geräte außer dem UA-1X vom
Deutsch
USB-Anschluss, bevor Sie den Treiber installieren. Wenn mit Ihrem Computer außer dem
UA-1X ein weiteres USB-Gerät verbunden ist, während Sie den Treiber installieren, wird
der Treiber eventuell nicht fehlerfrei installiert.
Bevor Sie das UA-1X benutzen können, müssen Sie zuerst nacheinander die Treiber
für das USB-Verbundgerät, die USB Human Interface und das USB-Audiogerät
installieren. Diese Treiber sind in Windows enthalten. Wenn Sie Windows 98
verwenden, befinden sich diese Treiber auf der Microsoft Windows CD-ROM,
Sie sollten daher die Microsoft Windows CD-ROM bereithalten.
Français
(Dies ist nicht erforderlich für Windows Me, 2000 oder XP.)
Application USB
connector
Español
USB
USB cable
Driver
Computer UA-1X
31
UA-1X_ALL.book 32 ページ 2003年12月3日 水曜日 午後2時50分
■ Windows XP/2000-Anwender
1
Trennen Sie das UA-1X von Ihrem Computer, schalten
Sie Ihren Computer ein und starten Sie Windows.
Stecken Sie alle USB-Kabel außer der USB-Tastatur und
der USB Maus aus (falls vorhanden).
3
Starten sie Windows neu, nachdem Sie den Treiber Dieses Gerät ist mit einem
installiert haben. Schutzschaltkreis ausgestattet.
Nach dem Anschluss eines
USB-Steckers benötigt das
Gerät eine kurze Zeitspanne
Nun nehmen Sie die Einstellungen für den Treiber vor.
(einige Sekunden), bis es den
→ Einstellungen und Überprüfung (S. 38)
normalen Betrieb aufnimmt.
32
UA-1X_ALL.book 33 ページ 2003年12月3日 水曜日 午後2時50分
■ Windows Me-Anwender
1
Trennen Sie das UA-1X von Ihrem Computer,
English
schalten Sie Ihren Computer ein und starten
Sie Windows.
Stecken Sie alle USB-Kabel außer der USB-Tastatur und
der USB Maus aus (falls vorhanden).
2
Schließen Sie das UA-1X an Ihsren Computer mit
Dieses Gerät ist mit einem
einem USB-Kabel an. Schutzschaltkreis ausgestattet.
Deutsch
fig.02-03.e Nach dem Anschluss eines
USB-Steckers benötigt das
3 Gerät eine kurze Zeitspanne
(einige Sekunden), bis es den
Windows erkennt
normalen Betrieb aufnimmt.
anschließend das UA-1X und
das Dialogfeld “Hardware-
Assistent” wird angezeigt.
Stellen Sie sicher, dass
Automatisch nach geeigneten Treiber suchen Es kann einige Zeit dauern,
Français
(empfohlen) ausgewählt ist und klicken Sie auf [Next]. bis dieses Dialogfeld
erscheint.
4
Die Suche nach dem Treiber beginnt.
5
Sobald der richtige Treiber gefunden wurde, beginnt
der Prozess der Treiberinstallation. Italiano
fig.02-04.e
6
Wenn ein Dialogfeld
Abhängig von Ihrer
erscheint, das Sie darüber Computerinstallation kann
informiert, dass die es etwas dauern, bis das
Treiberinstallation Gerät erkannt wird, nachdem
der Treiber installiert wurde.
abgeschlossen ist, klicken
Español
33
UA-1X_ALL.book 34 ページ 2003年12月3日 水曜日 午後2時50分
■ Windows 98-Anwender
Die Installation muss in der Reihenfolge USB-Verbundgerät,
USB Human Interface Device und USB-Audiogerät
erfolgen. Gehen Sie bei der Installation wie anschließend
beschrieben vor.
1
Trennen Sie das UA-1X von Ihrem Computer, schalten
Sie Ihren Computer ein und starten Sie Windows.
Stecken Sie alle USB-Kabel außer der USB-Tastatur und
der USB Maus aus (falls vorhanden).
2
Legen Sie die Microsoft Windows CD-ROM in Ihr
Dieses Gerät ist mit einem
CD-ROM-Laufwerk ein und verwenden Sie ein
Schutzschaltkreis ausgestattet.
USB-Kabel, um das UA-1X an Ihren Computer Nach dem Anschluss eines
anzuschließen. USB-Steckers benötigt das
Gerät eine kurze Zeitspanne
(einige Sekunden), bis es den
Da bei einigen Computern bereits beim Kauf der Inhalt normalen Betrieb aufnimmt.
fig.02-05.e
3
Das USB-Verbundgerät wird
automatisch erkannt und das
Wenn dieses Dialogfeld nicht
Dialogfeld “Hardware- angezeigt wird, lesen Sie
Assistent” wird angezeigt. bitte Problems related to
the USB driver (S. 111).
Klicken Sie auf [Next].
fig.02-06.e
4
Wenn die Anzeige fragt, “Wie
möchten Sie vorgehen?”,
wählen Sie “Nach dem besten
Treiber für das Gerät suchen.
(empfohlen)” und klicken Sie
anschließend auf [Next] (Weiter).
34
UA-1X_ALL.book 35 ページ 2003年12月3日 水曜日 午後2時50分
fig.02-07.e
5
Wählen Sie CD-ROM-Gerät
English
und klicken Sie auf [Next]
(Weiter).
fig.02-08.e
6
Klicken Sie auf [Next].
* Abhängig von Ihrem System kann sich
die Position des Treibers von der
Deutsch
obigen Abbildung unterscheiden,
aber das ist kein Problem.
7
Das Kopieren der Datei (Treiber) beginnt.
fig.02-09.e
Wenn die Microsoft Windows
CD-ROM nicht in das CD-ROM-
Français
Laufwerk eingelegt wurde,
wird eventuell das Dialogfeld
“Diskette einlegen” angezeigt.
In diesem Fall legen Sie die
Microsoft Windows CD-ROM
in das CD-ROM-Laufwerk
ein und klicken auf [OK].
Italiano
Español
35
UA-1X_ALL.book 36 ページ 2003年12月3日 水曜日 午後2時50分
fig.02-10.e
8
Sobald die Installation des
Treibers USB-Verbundgerät
beendet ist, wird folgendes
Dialogfeld angezeigt. Klicken
Sie auf [Finish].
fig.02-11.e
In Schritt 6 zeigt der
Bildschirm die Meldung
9 “Die Treiberdatei für
Nun wird das USB Human
folgendes Gerät wird
Interface-Gerät automatisch gesucht: USB-Audiogerät.”
erkannt, und das Dialogfeld
“Hardware-Assistent” wird
angezeigt. Klicken Sie auf
[Next] (Weiter) und setzen
Sie die Installation wie in den
Schritten 4-7 beschrieben
fort (S. 34-35).
fig.02-12.e
10
Sobald die Installation des
USB Human Interface-
Treibers beendet ist, wird
folgendes Dialogfeld
angezeigt. Klicken Sie
auf [Finish].
36
UA-1X_ALL.book 37 ページ 2003年12月3日 水曜日 午後2時50分
fig.02-13.e
English
Audiogerät automatisch “Die Treiberdatei für
erkannt, und das Dialogfeld folgendes Gerät wird
“Hardware-Assistent” gesucht: USB-Audiogerät.”
wird angezeigt.
Klicken Sie auf [Next] (Weiter) und setzen Sie die Installation
wie in den Schritten 4-7 beschrieben fort (S. 34-35).
fig.02-14.e
12
Deutsch
Sobald die Installation des
Treibers USB-Audiogerät Abhängig von Ihrem System
ist es möglich, dass der
beendet ist, wird ein
Mauszeiger minutenlang
Dialogfeld ähnlich wie hier als Sanduhr angezeigt wird,
angezeigt. Klicken Sie auf nachdem Sie auf [OK]
[Finish]. geklickt haben. Warten Sie
in diesem Fall, bis das System
Damit ist die Installation der Treiber USB-Verbundgerät, nicht mehr ausgelastet ist.
USB Human Interface Device und USB-Audiogerät beendet.
Français
Starten Sie Windows neu.
Italiano
Español
37
UA-1X_ALL.book 38 ページ 2003年12月3日 水曜日 午後2時50分
2
Öffnen Sie die “Eigenschaften von Sounds und
Multimedia” (für Windows 98, “Eigenschaften
für Multimedia”).
Bei Verwendung von Windows XP/2000/Me:
Doppelklicken Sie in der “Systemsteuerung auf das Symbol
[Sounds und Multimedia], um das Dialogfeld
“Eigenschaften für Sounds und Multimedia” zu öffnen.
* Wenn das Dialogfeld Eigenschaften von Sounds und
Multimedia nicht angezeigt wird
Windows XP:
Klicken Sie in der Systemsteuerung auf Sounds, Sprache
und Audiogeräte. Nun klicken Sie auf Sound und
Audiogeräte um auf das Dialogfeld “Eigenschaften
für Sound- und Audiogeräte” zuzugreifen.
Windows Me:
Klicken Sie auf Alle Optionen der Systemsteuerung
anzeigen im linken Rahmen.
Windows 98-Anwender:
Doppelklicken Sie in der Systemsteuerung auf das Symbol
[Multimedia], um das Dialogfeld Eigenschaften für
Multimedia zu öffnen.
38
UA-1X_ALL.book 39 ページ 2003年12月3日 水曜日 午後2時50分
3
Klicken Sie auf die Registerkarte Audio.
Wenn Sie mit Windows XP
arbeiten, wählen Sie als
4
English
Standardgerät für die
Wählen Sie als Bevorzugtes Gerät für Wiedergabe
Audiowiedergabe und als
und Bevorzugtes Gerät für Aufnahme USB Audio Standardgerät für die
CODEC oder USB-Audiogerät. Audioaufnahme USB
Audio CODEC.
Klicken Sie auf und klicken Sie in der angezeigten Liste
auf USB Audio CODEC oder USB-Audiogerät, um dieses
Gerät auszuwählen. Wenn Sie mit Windows 98
arbeiten, wählen Sie als
Bevorzugtes Gerät für die
Deutsch
Wiedergabe und als
5 Bevorzugtes Gerät für die
Klicken Sie auf [OK], um die Konfiguration Aufnahme USB Audio
abzuschließen. CODEC.
Français
Audiogerät (1).”
Italiano
Español
39
UA-1X_ALL.book 40 ページ 2003年12月3日 水曜日 午後2時50分
1
Klicken Sie auf die Windows Start-Schaltfläche Wenn die Lautstärkere-
und wählen Sie Programme (Unter Windows XP Alle gelung auf Ihrem Computer
nicht installiert ist, verwenden
Programme) – Zubehör – Unterhaltungsmedien –
Sie das Symbol Software in
Lautstärkeregelung, um sie zu starten. der Systemsteuerung, um
sie zu installieren. Um Details
Windows XP-Anwender
fig.05-16ae_30
zur Installation zu erhalten,
lesen Sie bitte das Benutzer-
handbuch für Windows oder
rufen die Windows Hilfe auf.
Windows Me-Anwender
fig.02-17.e.eps
40
UA-1X_ALL.book 41 ページ 2003年12月3日 水曜日 午後2時50分
2
Sie können den Regler nach oben oder nach unten
verschieben, um die Lautstärke des UA-1X anzupassen. Durch Verstellen der
Lautstärke können Sie den
English
Folgende Optionen können eingestellt werden.
Sound aus Ihrem Computer
über das UA-1X mit der
bestmöglichen Audioqualität
wiedergeben.
USB-Audio Passt die Lautstärke der analogen
(Lautsprecher) Ausgänge an (Line Output und
Kopfhörer-Ausgang). Die
Digitalausgabe wird hiermit nicht
Wenn "Ton aus" aktiviert ist
verändert (*1).
oder wenn der Schieberegler
CD- Passt die “CD-Musik”-Lautstärke des
ganz unten ist, wird aus dem
Deutsch
Wiedergabe CD-ROM-Laufwerks Ihres Computers
UA-1X kein Sound
an (*2).
ausgegeben.
Wave Passt die Lautstärke an, die vom
Audio-Ausgabegerät “USB Audio
gerät” ausgegeben wird. Die
Digitalausgabe und die analoge
Ausgabe werden hiermit geändert.
SW Synth Stellt die Lautstärke des Software Wenn das UA-1X
synthesizers ein, der in Windows angeschlossen ist, gibt
integriert ist. Windows keinen Sound aus
den Lautsprechern Ihres
* 1 Abhängig von Ihrer Windows-Version kann dies als
Français
Computers aus. Da der Sound
“Analoganschluss.” angezeigt werden. von Ihrem Computer aus der
* 2 Wenn die Wiedergabe der CD durch die Anpassung der Kopfhörerbuchse des UA-1X
Lautstärke nicht verändert wird, ändern Sie die oder aus den Line-Ausgangs-
buchsen anstelle aus den
WAVE-Lautstärke.
Lautsprechern ausgegeben
wird, müssen Sie die
Kopfhörer oder Monitorlaut-
sprecher mit dem UA-1X
verbinden. Alternativ können
Italiano
Sie die Line-Ausgangs-
buchsen des UA-1X mit den
LINE-Eingangsbuchsen Ihres
Computers verbinden.
Español
41
UA-1X_ALL.book 42 ページ 2003年12月3日 水曜日 午後2時50分
Wenn Sie das CD-ROM-Gerät Ihres Computer’s für das Abspielen einer Audio-CD
verwenden oder wenn Sie Hintergrundmusik für Spiele mit dem UA-1X abspielen
Windows XP/2000-Anwender:
Windows Me-Anwender:
1. Öffnen Sie das Dialogfeld Systemeigenschaften.
Wählen Sie Start | Einstellungen | Systemsteuerung und doppelklicken Sie in der
Systemsteuerung auf das Symbol System.
2. Klicken Sie auf die Registerkarte Geräte-Manager.
3. Öffnen Sie die Eigenschaften des CD-ROM-Laufwerks. ’
Doppelklicken Sie auf das Symbol CD-ROM und doppelklicken Sie anschließend
auf das CD-ROM-Laufwerk, das Sie verwenden.
4. Klicken Sie auf das Register Eigenschaften und aktivieren Sie unter Digitale CD-
Wiedergabe die Option “Digitale CD-Wiedergabe für dieses Gerät aktivieren.”
Windows 98-Anwender:
1. Öffnen Sie das Dialogfeld Eigenschaften für Multimedia.
Wählen Sie Start | Einstellungen | Systemsteuerung und doppelklicken Sie in der
Systemsteuerung auf das Symbol Multimedia.
2. Klicken Sie auf das Register “Musik-CD” und aktivieren Sie die Option “Digitale
CD-Wiedergabe für dieses CD-Gerät aktivieren.”
* Es kann vorkommen, dass abhängig von Ihrem System die Wiedergabe trotzdem nicht möglich
ist. Einzelheiten hierzu finden Sie in den Informationen, die Ihr Computer-Hersteller anbietet. ’
Wenn Sie ein CD-ROM-Gerät vom Typ PC-Card (PCMCIA) verwenden, kann die Wiedergabe
von WAVE-Daten oder einer Audio-CD auf dem CD-ROM-Gerät dazu führen, dass der Sound
unterbrochen wird oder kein Sound erklingt.
42
UA-1X_ALL.book 43 ページ 2003年12月3日 水曜日 午後2時50分
* Wenn Sie ein Windows-Anwender sind, lesen Sie bitte Anschlüsse und Treiberinstallation
(Windows) (S. 31).
English
Wenn Sie Ihren Computer mit angeschlossenem UA-1X starten, wird der Computer
eventuell instabil. Starten Sie den Computer in diesem Fall, bevor Sie das UA-1X
anschließen, und verbinden Sie das UA-1X mit dem Computer nach dem Hochfahren.
Deutsch
Was ist ein Treiber?
Ein Treiber ist Software, die es einem Anwendungsprogramm auf Ihrem Computer
ermöglicht, Daten zum/vom UA-1X zu übertragen, wenn das Gerät an Ihren
Computer via USB-Kabel angeschlossen ist.
Der Treiber überträgt die Daten der Anwendung an das UA-1X sowie die Daten
vom UA-1X an die Anwendung.
fig.05-01.e
Français
Application USB
connector
USB
USB cable
Driver
Italiano
Computer UA-1X
43
UA-1X_ALL.book 44 ページ 2003年12月3日 水曜日 午後2時50分
1
Starten Sie den Macintosh, wobei das UA-1X
ausgesteckt ist.
Stecken Sie alle USB-Kabel außer der USB-Tastatur und
der USB-Maus aus (falls vorhanden).
2
Beenden Sie alle aktuell ausgeführten Programme
(Anwendungen).
Wenn Sie ein Virenschutzprogramm oder ähnliche Software
verwenden, müssen Sie diese ebenfalls beenden.
fig.03-02.e
3
Nachdem Sie Mac OS
gestartet haben, wählen
Sie Apple System
Profiler im Menü Apple.
Daraufhin wird das
Dialogfeld “Apple System
Profiler” angezeigt.
4
Klicken Sie auf die Registerkarte Devices and
Volumes.
5
Wählen Sie Update all information (alle
Informationen aktualisieren) im Menü Commands. Dieses Gerät ist mit einem
Schutzschaltkreis ausgestattet.
6 Nach dem Anschluss eines
USB-Steckers benötigt das
Schließen Sie das UA-1X an Ihren Computer mit
Gerät eine kurze Zeitspanne
einem USB-Kabel an.
(einige Sekunden), bis es den
normalen Betrieb aufnimmt.
44
UA-1X_ALL.book 45 ページ 2003年12月3日 水曜日 午後2時50分
7
Warten Sie ungefähr fünf Sekunden lang.
UA-1X benutzt einen Treiber, der im Mac OS enthalten ist.
English
Während Sie noch warten, verändert sich die
Bildschirmanzeige nicht, während das UA-1X vom
Computer erkannt wird. Arbeiten Sie währenddessen nicht
mit der Maus oder mit der Tastatur.
fig.03-04.e
8
Um zu prüfen, ob die
Erkennung abgeschlossen
ist, wechseln Sie erneut
Deutsch
in den Apple System
Profiler und wählen
Update all information aus dem Menü Commands.
Im Bereich USB werden drei Audiogeräte angezeigt.
Français
auf Quit, um den “Apple System Profiler” zu schließen.
Wenn diese Geräte nicht angezeigt werden, trennen Sie
das UA-1X vom Anschluss, warten ca. 10 Sekunden und
wiederholen alle Schritte ab Schritt 2.
1
Klicken Sie im Menü
Apple auf die Option
Control Panels -
Sound (Kontrollfelder –
Español
2
Klicken Sie auf die Registerkarten Speakers
(Lautsprecher) oder Speaker Settings
(Lautsprechereinstellungen).
45
UA-1X_ALL.book 46 ページ 2003年12月3日 水曜日 午後2時50分
fig.03-06.e
3
Reduzieren Sie die Der Inhalt der Anzeige
Lautstärke des UA-1X hängt vom installierten
Betriebssystem und von
und Ihrer Audiogeräte den jeweiligen Daten ab.
und klicken Sie
anschließend auf
[Start Test].
fig.03-07.e
4
Verwenden Sie die
Leiste [Main Volume]
(Lautstärke), um die
Lautstärke anzupassen.
Wenn Sie fertig sind,
Je nach OS-Version ist
klicken Sie auf [Stop eventuell keine Leiste
Test] (Test stoppen). [Main Volume] (Lautstärke)
vorhanden. Verwenden Sie
Testsounds werden von
in diesem Fall die Leiste
links nach rechts - wie [Volume] (Lautstärke) in
die Bildschirmanzeige - [Output] (Ausgang), um die
ausgegeben. Lautstärke anzupassen.
fig.03-08.e
5
Im Dialogfeld Sound
(Ton) klicken Sie auf die
Registerkarte Input
(Eingang).
Wenn USB Audio nicht
Anschließend wählen Sie in angezeigt wird, schließen
Choose a source for sound Sie das Dialogfeld “Sound”
input: (Wählen Sie ein Gerät und trennen das USB-Kabel
des UA-1X vom Macintosh.’
für die Tonausgabe) die
Installieren Sie den Treiber
Option USB Audio.
erneut.(S. 44)
* Aktivieren Sie nicht “[Play sound through output device]”
(Ton über das Ausgabegerät abspielen).
46
UA-1X_ALL.book 47 ページ 2003年12月3日 水曜日 午後2時50分
6
Nachdem Sie alle Einstellungen vorgenommen haben,
schließen Sie das Dialogfeld “Sound.”
English
Wählen Sie die Option Quit im Menü File.
Deutsch
CPU-Auslastung bedingt. Das Rauschen sollte jedoch nicht in der Aufnahme
selbst auftreten. Derartiges Rauschen sollte nur im Wiedergabesignal
vorkommen.
• Der Standardtreiber, der mit Mac OS ausgeliefert wird, ist nicht
ASIO-kompatibel.
Français
Italiano
Español
47
UA-1X_ALL.book 48 ページ 2003年12月3日 水曜日 午後2時50分
2
Öffnen Sie das Dialogfeld System Preference und
klicken Sie auf Sound.
fig.macX-1
3
Klicken Sie im Register
Sound Effects
(Soundeffekte) auf
Play alerts and
sound effects
through (Warntöne
und Klangeffekte
spielen über) und
wählen Sie USB Audio CODEC als Wiedergabegerät
für die Soundeffekte.
48
UA-1X_ALL.book 49 ページ 2003年12月3日 水曜日 午後2時50分
figmacX-2, macOSX-3.
4
Klicken Sie im Register
English
Output auf die Option
USB Audio CODEC,
Wenn aus dem Lautsprecher
um dieses Gerät für (internen Sprecher) kein Sound
die Ausgabe von ausgegeben wird, wählen Sie
Built-in audio controller im
Sound auszuwählen. Register Output.
figmacX-2, macOSX-3.
Deutsch
Wenn das Register
Input angezeigt wird,
wählen Sie USB
Audio CODEC als
Gerät für die Eingabe
von Sounds.
Français
Bekannte Probleme: UA-1X
Vorsicht
Bitte prüfen Sie vor der Verwendung Ihres Programms
Folgendes.
• Schließen Sie das UA-1X an Ihren Computer mit einem USB-Kabel an,
bevor Sie Ihr Programm starten.
• Während das Programm ausgeführt wird, sollten Sie das USB-Kabel Italiano
des UA-1X nicht vom Gerät trennen.
• Beenden Sie das Programm, bevor Sie das USB-Kabel des UA-1X
ausstecken.
• Deaktivieren Sie den Ruhezustand Ihres Macintosh.
• Das UA-1X funktioniert nicht in der Mac OS X Classic-Umgebung.
Sie können es nicht verwenden, wenn die Classic-Umgebung
ausgeführt wird.
Español
49
UA-1X_ALL.book 50 ページ 2003年12月3日 水曜日 午後2時50分
■ Audio-Softwareeinstellungen
Schließen Sie das UA-1X an Ihren Computer mit einem
USB-Kabel an, bevor Sie Ihr Programm starten.
50
UA-1X_ALL.book 51 ページ 2003年12月3日 水曜日 午後2時50分
English
Avant d'installer le pilote
Deutsch
raccordé à l’ordinateur lorsque vous installez le pilote, celui-ci ne sera pas correctement
installé.
Pour utiliser l'UA-1X, vous devez d'abord installer dans l’ordre le pilote USB Composite,
puis le pilote USB Human Interface, et enfin le pilote USB Audio Device. Ces pilotes sont
inclus dans Windows. Si vous utilisez Windows 98, ce pilote est fourni sur le CD-ROM
de Microsoft Windows, dont vous aurez besoin pendant l'installation..
(Inutile pour Windows Me, 2000 ou XP.)
Français
Qu'est-ce qu'un pilote ?
Un pilote est un logiciel qui permet à un programme s'exécutant sur votre ordinateur
de transférer des données de et vers un périphérique (comme l'UA-1X) lorsque celui-ci
est connecté à votre ordinateur à l'aide d'un câble USB.
Le pilote transmet les données de l'application à l'UA-1X et vice-versa.
fig.05-01.e
Italiano
Application USB
connector
USB
USB cable
Driver
Español
Computer UA-1X
51
UA-1X_ALL.book 52 ページ 2003年12月3日 水曜日 午後2時50分
3
Après installation du pilote, redémarrez Windows.
Cet appareil est équipé d'un
circuit de protection. Lors de
Vous devez ensuite procéder à la configuration du pilote. la connexion au port USB,
→ Configuration et contrôle (p. 58) attendez quelques secondes
avant d'utiliser l'appareil.
52
UA-1X_ALL.book 53 ページ 2003年12月3日 水曜日 午後2時50分
■ Utilisateurs de Windows Me
1
L’UA-1X étant déconnecté, mettez votre ordinateur
English
sous tension ; Windows démarre.
Débranchez tous les câbles USB, à l’exception de ceux du
clavier et de la souris (le cas échéant).
2
Utilisez un câble USB pour connecter l'UA-1X à votre
Cet appareil est équipé
ordinateur. d'un circuit de protection.
Deutsch
fig.02-03.e Lors de la connexion au
port USB, attendez quelques
3 secondes avant d'utiliser
Windows détecte l’UA-1X, l'appareil.
puis la boîte de dialogue
“Assistant Ajout de
nouveau matériel” s’affiche.
Assurez-vous que l’option
Cette boîte de dialogue
Rechercher automatiquement un meilleur pilote
peut mettre un peu de
Français
(recommandé) est sélectionnée, puis cliquez sur [Suivant].
temps à s'afficher.
4
La recherche du pilote démarre.
5
Lorsque le bon pilote est trouvé, son installation
démarre. Italiano
fig.02-04.e
6
Lorsque la boîte de dialogue
Selon la configuration de
vous informant que
votre ordinateur, un court
l'installation du pilote est délai peut intervenir après
terminée s'affiche, cliquez sur l'installation du pilote
jusqu'à la reconnaissance
[Terminer] et redémarrez
Español
du périphérique.
Windows.
53
UA-1X_ALL.book 54 ページ 2003年12月3日 水曜日 午後2時50分
■ Windows 98
Les pilotes doivent être installés dans l’ordre suivant : USB
Composite Device driver, USB Human Interface Device
driver, USB Audio Device driver. Procédez comme suit
pour effectuer l'installation.
1
L’UA-1X étant déconnecté, mettez votre ordinateur
sous tension ; Windows démarre.
Débranchez tous les câbles USB, à l’exception de ceux du
clavier et de la souris (le cas échéant).
2
Insérez le CD-ROM Microsoft Windows dans votre
lecteur de CD-ROM et utilisez un câble USB pour Cet appareil est équipé d'un
circuit de protection. Lors de
connecter l' UA-1X à votre ordinateur. la connexion au port USB,
attendez quelques secondes
avant d'utiliser l'appareil.
Certains ordinateurs étant vendus avec le contenu du
CD-ROM de Microsoft Windows déjà copié sur le disque dur,
ce CD-ROM n’est pas forcément livré avec l’ordinateur.
Dans ce cas, vous pourrez installer le pilote sans recourir
au CD-ROM.
fig.02-05.e
3
Un périphérique USB
Composite est détecté
automatiquement et la boîte de
Si cette boîte de dialogue ne
dialogue de l'“Assistant Ajout s’affiche pas, reportez-vous à
de nouveau matériel” s'affiche. la section Problems related
to the USB driver (p. 111)
Cliquez sur [Suivant].
fig.02-06.e
4
Lorsque l'ordinateur vous
demande “Que voulez-vous
faire ?”, sélectionnez
“Rechercher le meilleur pilote
pour votre périphérique.
(recommandé)” et cliquez
sur [Suivant].
54
UA-1X_ALL.book 55 ページ 2003年12月3日 水曜日 午後2時50分
fig.02-07.e
5
Cochez “Lecteur de
English
CD-ROM” et cliquez
sur [Suivant].
fig.02-08.e
6
Cliquez sur [Suivant].
* Selon votre système, l'emplacement du
pilote peut différer de celui de la figure
Deutsch
ci-dessus, mais ceci ne constitue pas
un problème.
7
La copie du fichier (pilote) démarre.
fig.02-09.e
Si le CD-ROM Windows n'est
pas inséré dans le lecteur de
CD-ROM, la boîte de dialogue
Français
“Insérer le disque” s’affiche.
Dans ce cas, insérez le CD-ROM
Microsoft Windows dans le
lecteur de CD-ROM et
cliquez sur [OK].
Italiano
Español
55
UA-1X_ALL.book 56 ページ 2003年12月3日 水曜日 午後2時50分
fig.02-10.e
8
Une fois l'installation du pilote
Périphérique USB
Composite terminée, la boîte
de dialogue suivante s'affiche.
Cliquez sur [Terminer].
fig.02-11.e
10
Lorsque l'installation du pilote
USB Human Interface Device
est terminée, la boîte de
dialogue suivante s'affiche.
Cliquez sur [Terminer].
56
UA-1X_ALL.book 57 ページ 2003年12月3日 水曜日 午後2時50分
fig.02-13.e
English
sera détecté automatiquement recherche les fichiers du
et la boîte de dialogue pilote pour ce périphérique :
“Assistant Ajout de nouveau USB Audio Device.”
matériel” s’affichera.
Cliquez sur [Suivant], puis procédez à l’installation comme
aux étapes 4–7 (p. 54-55).
fig.02-14.e
12
Deutsch
Une fois terminée l’installation Selon votre système, le
pointeur peut conserver la
du pilote USB Audio Device,
forme d’un sablier plusieurs
une boîte de dialogue similaire minutes après avoir cliqué sur
à la suivante s’affiche. Cliquez [OK]. Dans ce cas, patientez.
sur [Terminer].
L'installation des pilotes USB Composite Device, USB Human
Interface Device et USB Audio Device est terminée.
Redémarrez Windows.
Français
Vous devez ensuite procéder à la configuration du pilote.
→ Configuration et contrôle (p. 58)
Italiano
Español
57
UA-1X_ALL.book 58 ページ 2003年12月3日 水曜日 午後2時50分
Configuration et contrôle
2
Affichez “Sons et Propriétés multimédia”
(pour Windows 98, “Propriétés multimédia”).
Avec Windows XP/Me :
Dans le Panneau de configuration, cliquez deux fois sur
l'icône Sons et Multimédia pour ouvrir la boîte de dialogue
“Propriétés de Sons et multimédia.”
* Si l’icône “Propriétés de Sons et Multimédia” n’apparaît pas
Windows XP :
Dans le Panneau de configuration, cliquez sur Sons,
Voix et Périphériques audio. Cliquez ensuite sur Sons
et périphériques audio pour afficher la boîte de dialogue
“Propriétés de Son et Périphériques audio.”
Windows Me :
Dans le cadre de gauche, cliquez sur “Afficher toutes les
options du Panneau de configuration.”
Windows 98 :
Dans le Panneau de configuration, cliquez deux fois
sur l'icône Multimédia pour ouvrir la boîte de dialogue
Propriétés de multimédia.
58
UA-1X_ALL.book 59 ページ 2003年12月3日 水曜日 午後2時50分
3
Cliquez sur l'onglet Audio.
English
Pour Périphérique par défaut sous Lecture et définissez le Périphérique
par défaut de Lecture et
Périphérique par défaut sous Enregistrement,
Périphérique par défaut
sélectionnez CODEC audio USB ou Périphérique de Enregistrement sur
audio USB. CODEC audio USB.
Deutsch
par défaut de Lecture et
Périphérique par défaut
5 de Enregistrement sur
Cliquez sur [OK] pour confirmer. CODEC audio USB.
Français
audio USB (1).”
Italiano
Español
59
UA-1X_ALL.book 60 ページ 2003年12月3日 水曜日 午後2時50分
1
Cliquez sur le bouton Démarrer de Windows, puis Si le Contrôle du volume
sélectionnez Programmes (dans Windows XP, Tous n'est pas installé sur votre
ordinateur, utilisez Ajout/
les programmes)– Accessoires – Divertissement –
Suppression de
Contrôle du volume pour le démarrer. programmes dans le
Panneau de configuration
Windows XP
fig.05-16ae_30
pour l'installer. Pour plus de
précisions sur l'installation,
reportez-vous au manuel
d’utilisation de Windows
ou à l'Aide Windows.
Windows Me
fig.02-17.e.eps
60
UA-1X_ALL.book 61 ページ 2003年12月3日 水曜日 午後2時50分
2
Vous pouvez monter ou baisser le curseur pour régler
En augmentant la commande
le volume de l'UA-1X. Les options suivantes peuvent de volume, vous pouvez
English
être réglées. obtenir le son de qualité
optimale à partir de votre
ordinateur via l'UA-1X.
Deutsch
rique audio de sortie “Périphérique
audio USB.”
Les sorties numériques et analogiques
sont affectées.
SW Synth Règle le volume du logiciel de
synthétisation intégré à Windows.
Si l'UA-1X est connecté,
* 1 Selon votre version de Windows, cet élément peut être nommé Windows n'émettra aucun son
“Connecteur analogique.” en sortie des haut-parleurs de
* 2 Si la lecture du CD n'est pas modifiée en réglant ce volume, votre ordinateur. Puisque le
utilisez le volume WAVE. son de votre ordinateur sortira
Français
de la prise casque de l'UA-1X,
ou des prises de sortie de ligne
plutôt que depuis les haut-
arleurs de votre ordinateur,
vous devrez brancher un
casque ou des haut-parleurs à
l'UA-1X. Vous pouvez
également brancher les prises
de sortie de ligne de l'A-1X aux
prise d'entrée de LIGNE de
Italiano
votre ordinateur.
Español
61
UA-1X_ALL.book 62 ページ 2003年12月3日 水曜日 午後2時50分
Windows XP/2000/XP :
Windows Me :
Windows 98 :
2. Dans CD audio, activez l’option “Lecteur CD-ROM par défaut pour les
CD audio.”
* Selon votre système, des problèmes de lecture peuvent subsister. Pour plus de détails, reportez-
vous aux informations fournies par le constructeur de votre ordinateur. Si vous utilisez un
lecteur de CD-ROM de type PCMCIA, la lecture des données WAVE d’un CD-ROM ou
d'un CD audio sur ce lecteur peut interrompre le son ou le supprimer totalement.
62
UA-1X_ALL.book 63 ページ 2003年12月3日 水曜日 午後2時50分
English
Lorsque vous démarrez votre ordinateur avec l'UA-1X connecté, celui-ci peut devenir
instable. Si cela se produit, démarrez d'abord votre Macintosh, puis connectez l'UA-1X.
Deutsch
Un pilote est un logiciel qui permet à un programme s'exécutant sur votre ordinateur
de transférer des données de et vers un périphérique (comme l'UA-1X) lorsque celui-ci
est connecté à votre ordinateur à l'aide d'un câble USB.
Le pilote transmet les données de l'application à l'UA-1X et vice-versa.
fig.05-01.e
Français
Application USB
connector
USB
USB cable
Driver
63
UA-1X_ALL.book 64 ページ 2003年12月3日 水曜日 午後2時50分
1
L’UA-1X étant éteint, mettez le Macintosh sous
tension.
Débranchez tous les câbles USB, à l’exception de ceux
du clavier et de la souris (le cas échéant).
2
Quittez tous les logiciels (applications) actifs.
Si vous utilisez un anti-virus, quittez-le également.
fig.03-02.e
3
Après avoir démarré
Mac OS, sélectionnez
Informations système
Apple dans le menu
Apple.
La boîte de dialogue
“Informations système
Apple” s'affiche.
4
Cliquez sur l'onglet Périphériques/Volumes.
5
Choisissez Mettre à jour toutes les informations
dans le menu Commandes.
64
UA-1X_ALL.book 65 ページ 2003年12月3日 水曜日 午後2時50分
7
Attendez environ cinq secondes.
L'UA-1X utilise un pilote inclus dans le système Mac OS.
English
Pendant que vous patientez, l’affichage ne change pas,
mais l’UA-1X est bien en cours de détection. Ne touchez
ni à la souris, ni au clavier.
fig.03-04.e
8
Pour vérifier que la
détection est positive,
affichez à nouveau les
Deutsch
Informations système
Apple et sélectionnez
Mettre à jour toutes les informations du menu
Commandes.
Dans la zone USB, trois appareils audio sont affichés.
Français
“Informations système Apple .”
Si les appareils ne s’affichent pas correctement, débranchez
l’UA-1X, attendez environ dix secondes, puis répétez la
procédure à partir de l’étape 2.
1
Dans le menu
Apple, sélectionnez
[Tableaux de bord]
pour ouvrir la boîte
Español
de dialogue Son.
2
Cliquez sur l’onglet
Haut-parleurs ou
Réglage des haut-parleurs.
65
UA-1X_ALL.book 66 ページ 2003年12月3日 水曜日 午後2時50分
fig.03-06.e
3
Baissez le volume sur L’affichage dépend de votre
l'UA-1X et sur votre système d’exploitation et de
vos données.
appareil audio, puis
cliquez sur [Démarrer
le test].
fig.03-07.e
4
Utilisez la barre [Volume
principal] pour régler
le volume. Lorsque vous
avez terminé, cliquez Avec certaines versions de
Mac OS, la barre Volume
sur [Arrêter le test]. principal n'existe pas.
Les sons de test sont entendus Dans ce cas, utilisez la barre
Volume dans l'onglet
de gauche à droite, en suivant
Sortie pour régler
l’affichage.
le volume.
fig.03-08.e
5
Dans la boîte de dialogue
Son, cliquez sur l’onglet
Entrée.
Pour Choisir un Si Audio USB ne s’affiche
périphérique d'entrée pas, fermez la boîte de
audio, sélectionnez dialogue “Son”, puis
Audio USB. débranchez le câble USB
de l’UA-1X du Macintosh.
* Ne cochez pas “Lecture du
Procédez à une nouvelle
son par le périphérique
installation du pilote (p. 64).
de sortie.”
66
UA-1X_ALL.book 67 ページ 2003年12月3日 水曜日 午後2時50分
6
Lorsque vous avez terminé la configuration, fermez
la boîte de dialogue “Son.”
English
Dans le menu Fichier, sélectionnez Quitter.
Deutsch
de l'enregistrement. Ce genre de problème ne devrait concerner que le signal
de lecture.
• Le pilote standard livré avec Mac OS n'est pas compatible ASIO.
Français
Italiano
Español
67
UA-1X_ALL.book 68 ページ 2003年12月3日 水曜日 午後2時50分
2
Ouvrez la boîte de dialogue System Preference et
cliquez sur Sound.
fig.macX-1
3
Dans l'onglet Sound
Effects, cliquez sur
Play alerts and
sound effects
through et
sélectionnez USB
Audio CODEC comme
périphérique de lecture pour les effets sonores.
figmacX-2, macOSX-3.
4
Cliquez sur l'onglet
Output, et sélectionnez
Si aucun son n'est produit par
USB Audio CODEC le haut-parleur
comme périphérique (haut-parleur interne) du
Macintosh, sélectionnez Built-
de sortie du son. in audio controller à partir de
onglets Output.
68
UA-1X_ALL.book 69 ページ 2003年12月3日 水曜日 午後2時50分
figmacX-2, macOSX-3.
5
Si l'onglet Input
English
s'affiche, sélectionnez
USB Audio CODEC
comme périphérique
d'entrée de sons.
Deutsch
suivants :
• Utilisez un câble USB pour brancher l'UA-1X à votre ordinateur avant
de lancer votre logiciel.
• Ne débranchez pas le câble USB de l'UA-1X lorsque votre logiciel est
en cours d'utilisation.
• Quittez votre logiciel avant de débrancher le câble USB de l'UA-1X.
• Désactivez la fonction de veille de votre Macintosh.
• L’UA-1X ne fonctionne pas avec l'environnement Mac OS X Classique.
Vous ne pouvez pas l'utiliser si l'environnement “Classique” est en
cours d'utilisation.
Français
■ Réglages du logiciel audio
Utilisez un câble USB pour brancher l'UA-1X à votre
ordinateur avant de lancer votre logiciel.
69
UA-1X_ALL.book 70 ページ 2003年12月3日 水曜日 午後2時50分
MEMO
UA-1X_ALL.book 71 ページ 2003年12月3日 水曜日 午後2時50分
* Per gli utenti Macintosh, fare riferimento a Collegamenti e installazione del driver
(Macintosh) (pag. 83).
English
Prima di installare il driver
Deutsch
USB prima di installare il driver. Evitare di lasciare collegato il dispositivo USB quando
se ne installa il driver perché l’installazione potrebbe non essere corretta.
Français
Definizione di un driver
Un driver è un programma informatico che permette di eseguire un’applicazione
sul computer per trasferire i dati da e verso l’UA-1X quando l’apparecchio
è collegato al computer tramite un cavo USB.
Il driver trasmette i dati dall’applicazione all’UA-1X e viceversa.
fig.05-01.e
Italiano
Application USB
connector
USB
USB cable
Driver
Español
Computer UA-1X
71
UA-1X_ALL.book 72 ページ 2003年12月3日 水曜日 午後2時50分
3 Questo apparecchio
Dopo aver installato il driver, riavviare Windows. è provvisto di un circuito
di protezione. È necessario
aspettare qualche secondo
Successivamente sarà necessario configurare il driver. dopo aver inserito un
connettore USB prima che
→ Configurazione e verifica (pag. 78)
l’apparecchio funzioni
normalmente.
72
UA-1X_ALL.book 73 ページ 2003年12月3日 水曜日 午後2時50分
■ Utenti Windows Me
1
Accendere il computer e avviare Windows senza
English
collegare l’UA-1X.
Scollegare tutti i cavi USB, ad eccezione della tastiera e del
mouse USB, se utilizzati.
2
Utilizzare un cavo USB per collegare l’UA-1X
Questo apparecchio
al computer. è provvisto di un circuito
di protezione. È necessario
Deutsch
fig.02-03.e
aspettare qualche secondo
3 dopo aver inserito un
connettore USB prima che
Windows rileva l’UA-1X
l’apparecchio funzioni
e appare la finestra di
normalmente.
dialogo “Installazione
guidata nuovo hardware.”
Accertarsi che l’opzione Cerca
Questa finestra potrebbe
un driver adatto alla periferica
richiedere un certo tempo
Français
(scelta consigliata) sia selezionata e fare clic su [Avanti].
prima di essere visualizzata.
4
Viene avviata la ricerca del driver.
5
Una volta che il driver corretto è stato trovato,
comincia l’installazione. Italiano
fig.02-04.e
A seconda della
6 configurazione informatica,
Nella finestra indicante che potrebbe passare un breve
l’installazione del driver è intervallo di tempo tra
l’installazione e il
giunta al termine, fare clic su
riconoscimento del driver.
[Fine] e riavviare Windows.
Español
73
UA-1X_ALL.book 74 ページ 2003年12月3日 水曜日 午後2時50分
■ Utenti Windows 98
L’installazione dei driver deve rispettare la seguente
successione:Periferica composita USB, Periferica USB
Human Interface e infine Periferica audio USB. Seguire
la procedura sotto indicata per eseguire l’installazione.
1
Accendere il computer e avviare Windows senza
collegare l’UA-1X.
Scollegare tutti i cavi USB, ad eccezione della tastiera e del
mouse USB, se utilizzati.
2
Inserire il CD-ROM di Microsoft Windows nell’unità
corrispondente e utilizzare un cavo USB per collegare Questo apparecchio
è provvisto di un circuito
l’UA-1X al computer. di protezione. È necessario
aspettare qualche secondo
dopo aver inserito un
Poiché alcuni computer sono venduti con il contenuto del connettore USB prima che
CD-ROM di Microsoft Windows già installato sul disco l’apparecchio funzioni
rigido, il CD in questione potrebbe non essere stato fornito. normalmente.
In questo caso il driver potrà essere installato senza il
CD-ROM di Microsoft Windows .
fig.02-05.e
3
Il dispositivo USB Composite
Device viene rilevato
automaticamente e appare
la finestra di dialogo Se questa finestra non
appare, fare riferimento a
“Installazione guidata
Problems related to the
Nuovo hardware.” USB driver (pag. 111).
Fare clic su [Avanti].
fig.02-06.e
4
Al messaggio “Scegliere
l’operazione da effettuare”,
selezionare “Cerca il miglior
driver per la periferica.
(scelta consigliata)”
e fare clic su [Avanti].
74
UA-1X_ALL.book 75 ページ 2003年12月3日 水曜日 午後2時50分
fig.02-07.e
5
Selezionare la casella Unità
English
CD-ROM e fare clic su
[Avanti].
fig.02-08.e
6
Fare clic su [Avanti].
* A seconda del sistema utilizzato, la
finestra Percorso del driver potrebbe
Deutsch
essere diversa da quella di seguito
illustrata, ma non è un problema.
7
A questo punto comincerà la copia dei file.
fig.02-09.e
Se il CD-ROM di Microsoft
Windows non è presente
Français
nell’unità CD-ROM, potrebbe
apparire la finestra di dialogo
“Inserire il disco.” In questo
caso, inserire il CD-ROM di
Microsoft Windows nell’unità
CD-ROM e fare clic su [OK].
Italiano
fig.02-10.e
8
Alla fine dell’installazione del
driver Periferica composita
USB, appare la seguente
finestra di dialogo. Fare Al passo 6, la finestra
clic su [Fine]. visualizza il messaggio
Español
75
UA-1X_ALL.book 76 ページ 2003年12月3日 水曜日 午後2時50分
fig.02-11.e
9
Nella tappa successiva,
il dispositivo Periferica
USB Human Interface viene
rilevato automaticamente
e appare la finestra di dialogo
“Installazione guidata nuovo
hardware.” Fare clic su
[Avanti] e continuare
l’installazione seguendo
la stessa procedura fino
ai passi 4-7 (pag. 74-75).
fig.02-12.e
10
Alla fine dell’installazione del
driver Periferica USB Human
Interface appare la seguente
finestra di dialogo. Fare clic
su [Fine].
76
UA-1X_ALL.book 77 ページ 2003年12月3日 水曜日 午後2時50分
fig.02-13.e
11
Nella tappa successiva, il
English
dispositivo Periferica
Al passo 6, la finestra
audio USB viene rilevato
visualizza il messaggio
automaticamente e appare “Ricerca del file del driver
la finestra di dialogo per la periferica: Periferica
“Installazione guidata audio USB.”
nuovo hardware.”
Fare clic su [Avanti] e continuare l’installazione seguendo
la stessa procedura fino ai passi 4-7 (pag. 74-75).
Deutsch
fig.02-14.e
12
Alla fine dell’installazione del A seconda del sistema
utilizzato, la clessidra potrebbe
driver Periferica audio USB,
restare visualizzata per alcuni
verrà visualizzata una finestra minuti dopo aver fatto clic su
di dialogo simile a quella sotto [OK]; è sufficiente attendere.
illustrata. Fare clic su [Fine].
L’installazione dei driver Periferica USB composita, Periferica
Français
USB Human Interface e infine Periferica audio USB è giunta
al termine. Riavviare Windows.
77
UA-1X_ALL.book 78 ページ 2003年12月3日 水曜日 午後2時50分
Configurazione e verifica
2
Aprire la finestra di dialogo “Suoni e periferiche
audio” (in Windows 98, “Proprietà multimediali”).
Se si utilizza Windows XP/2000/Me:
Nel Pannello di controllo, fare doppio clic sull’icona Suoni
e multimedia per aprire la finestra “Proprietà - Suoni
e multimedia.”
* Se l’icona Suoni e periferiche audio non è visualizzata
Windows XP:
Nel Pannello di controllo, fare clic su Suoni, voce
e periferiche audio. Fare quindi clic sull’icona Suoni
e periferiche audio per aprire la finestra di dialogo
“Proprietà – Suoni e periferiche audio.”
Windows Me
Nel riquadro a sinistra, fare clic su Visualizza tutte le opzioni
del Pannello di controllo.
Utenti Windows 98:
Nel Pannello di controllo, fare doppio clic sull’icona
Multimedia per aprire la finestra Proprietà multimediali.
78
UA-1X_ALL.book 79 ページ 2003年12月3日 水曜日 午後2時50分
3
Fare clic sulla scheda Audio.
Se si utilizza Windows XP,
4 impostare la Periferica
English
Come Periferica preferenziale per Riproduzione predefinita per Riproduzione
suoni e la Periferica
suoni e Periferica preferenziale per Registrazione predefinita per Registrazione
suoni, selezionare USB Audio CODEC o Periferica suoni su USB Audio CODEC.
audio USB.
Fare clic su e nell’elenco visualizzato fare clic su USB
Se si utilizza Windows 98,
Audio CODEC o Periferica audio USB per selezionarla.
impostare la Periferica
predefinita per Riproduzione
Deutsch
e la Periferica predefinita
5 per Registrazione su
Fare clic su [OK] per completare le impostazioni. USB Audio CODEC.
Français
Italiano
Español
79
UA-1X_ALL.book 80 ページ 2003年12月3日 水曜日 午後2時50分
1
Fare clic sul pulsante Start in Windows e selezionare Se il Controllo volume non
Programmi(In Windows XP, Tutti i programmi) – è installato sul computer,
utilizzare Installazione
Accessori – Svago – Controllo volume per avviarlo.
applicazioni nel Pannello
Utenti Windows XP di controllo per installarlo.
fig.05-16ae_30 Per ulteriori informazioni
sull’installazione, fare
riferimento al manuale
utente di Windows o alla
Guida in linea.
Utenti Windows Me
fig.02-17.e.eps
80
UA-1X_ALL.book 81 ページ 2003年12月3日 水曜日 午後2時50分
2
Spostare lo slider verso l’alto o verso il basso per
Utilizzare il controllo volume
regolare il volume dell’UA-1X. È possibile regolare per avere una qualità ottimale
English
i seguenti elementi. dell'audio in uscita dal
computer tramite l'UA-1X.
Deutsch
dispositivo di uscita audio “Periferica
audio USB.” L’uscita digitale e quella
analogica cambiano.
SW Synth Regola il volume del software.
Se l'UA-1X è collegato,
sintetizzatore integrato di Windows.
Windows non trasmetterà
* 1 In funzione della versione di Windows, potrebbe essere alcun suono dagli altoparlanti
visualizzato come un “connettore analogico.” del computer. Dato che l'audio
* 2 Se la riproduzione del CD non cambia dopo aver regolato del computer verrà emesso
dalla presa delle cuffie o dalle
questo volume, cambiare il volume WAVE.
uscite linea dell'UA-1X e non
Français
dagli altoparlanti del
computer, sarà necessario
collegare le casse monitor
all'UA-1X. In alternativa è
possibile collegare le uscite
linea dell'UA-1X agli ingressi
LINE del computer.
Italiano
Español
81
UA-1X_ALL.book 82 ページ 2003年12月3日 水曜日 午後2時50分
82
UA-1X_ALL.book 83 ページ 2003年12月3日 水曜日 午後2時50分
* Per gli utenti Windows, fare riferimento alla sezione Collegamenti e installazione del
driver (Windows) (pag. 71).
English
Se il computer viene avviato con l’UA-1X collegato, il computer potrebbe diventare
instabile. In questo caso avviare il computer prima di collegare l’UA-1X e collegare
l’UA-1X dopo l’avvio.
Deutsch
Definizione di un driver
Un driver è un programma informatico che permette di eseguire un’applicazione sul
computer per trasferire i dati da e verso l’UA-1X quando l’apparecchio è collegato al
computer tramite un cavo USB.
Il driver trasmette i dati dall’applicazione all’UA-1X e viceversa.
fig.05-01.e
Français
Application USB
connector
USB
USB cable
Driver
UA-1X
Italiano
Computer
83
UA-1X_ALL.book 84 ページ 2003年12月3日 水曜日 午後2時50分
1
Dopo essersi accertati che l’UA-1X è scollegato,
avviare il Macintosh.
Scollegare tutti i cavi USB, ad eccezione della tastiera e del
mouse USB, se utilizzati.
2
Chiudere tutti i programmi in corso di esecuzione.
Se si utilizza un programma antivirus o simile, accertarsi
che sia vanch’esso chiuso.
fig.03-02.e
3
Dopo aver avviato
Mac OS, selezionare
Apple System Profiler
nel menu Apple.
Viene visualizzata la
finestra di dialogo “Apple
System Profiler.”
4
Fare clic sulla scheda Devices and Volumes.
5
Selezionare Update all information nel menu
Commands.
Questo apparecchio
6 è provvisto di un circuito
Utilizzare un cavo USB per collegare l’UA-1X di protezione. È necessario
al computer. aspettare qualche secondo
dopo aver inserito un
connettore USB prima che
l’apparecchio funzioni
normalmente.
84
UA-1X_ALL.book 85 ページ 2003年12月3日 水曜日 午後2時50分
7
Attendere circa cinque secondi.
L'UA-1X utilizza un driver fornito con Mac OS.
English
Durante l’operazione, l’UA-1X verrà rilevato anche se non
viene visualizzato alcun messaggio in questo senso. Evitare
di toccare il mouse o la tastiera.
fig.03-04.e
8
Per accertarsi che
l’apparecchio sia stato
rilevato correttamente,
Deutsch
riaprire Apple System
Profiler e selezionare
Update all information nel menu Commands.
Nell’area USB, verranno visualizzati tre dispositivi audio.
Français
Se non sono visualizzati correttamente, scollegare l’UA-1X,
aspettare circa dieci secondi, e ripetere la procedura fino
al passo 2.
■ Configurazione e verifica
Impostazione dell’ingresso/uscita audio
Italiano
fig.03-05.e
1
Nel menu Apple,
selezionare Control
Panels - Sound per
aprire la finestra
Español
Sound.
2
Fare clic sulla
scheda Speakers
o Speaker Settings.
85
UA-1X_ALL.book 86 ページ 2003年12月3日 水曜日 午後2時50分
fig.03-06.e
3
Abbassare al minimo La schermata potrebbe essere
il volume dell’UA-1X diversa in funzione del sistema
operativo utilizzato e dei dati.
e degli apparecchi audio
e fare clic su [Start Test].
fig.03-07.e
4
Utilizzare lo slider [Main
Volume] per regolare il
volume. Alla fine, fare
A seconda della versione del
clic su [Stop Test].
sistema operativo, lo slider
I suoni di prova sono emessi Main Volume potrebbe
da sinistra verso destra mancare. In questo caso,
utilizzare lo slider Volume
insieme a quanto
nella scheda Output per
visualizzato.
regolare il volume.
fig.03-08.e
5
Nella finestra di dialogo
Sound, fare clic sulla
Se USB audio” non
scheda Input.
è visualizzato, chiudere la
In Choose a source for finestra di dialogo “Sound”
sound input: selezionare e scollegare il cavo USB
USB audio. dell’UA-1X dal Macintosh.
Ripetere l’installazione
* Non selezionare “Play sound
del driver (pag. 84).
through output device.”
86
UA-1X_ALL.book 87 ページ 2003年12月3日 水曜日 午後2時50分
6
Alla fine delle impostazioni, chiudere la finestra
di dialogo “Sound.”
English
Selezionare Quit nel menu File.
Deutsch
nel segnale di riproduzione.
• Il driver fornito in standard con Mac OS non è ASIO compatibile.
Français
Italiano
Español
87
UA-1X_ALL.book 88 ページ 2003年12月3日 水曜日 午後2時50分
2
Aprire la finestra di dialogo System Preference e
fare clic su Sound.
fig.macX-1
3
Nella scheda Sound
Effects fare clic su
Play alerts and
sound effects
through e selezionare
USB Audio CODEC
come periferica di
riproduzione per gli
effetti sonori.
figmacX-2, macOSX-3.
4
Fare clic sulla scheda
Output e scegliere
USB Audio CODEC
Se dall'altoparlante interno del
come periferica di Macintosh non proviene alcun
emissione dell'audio. suono, selezionare Built-in
audio controller nelle schede
Output.
88
UA-1X_ALL.book 89 ページ 2003年12月3日 水曜日 午後2時50分
figmacX-2, macOSX-3.
5
Se la scheda Input
English
risulta visualizzata,
selezionare USB
Audio CODEC come
periferica di ingresso
dei suoni.
Deutsch
Avvertenza
Prima di utilizzare il software, controllare quanto segue.
• Collegare l’UA-1X al computer mediante un cavo USB prima di
avviare il software.
• Non scollegare il cavo USB dall'UA-1X mentre il software è in
esecuzione.
• Chiudere il software prima di scollegare il cavo USB dall'UA-1X.
• Disattivare le impostazioni Sleep del Macintosh.
• L'UR-1X non funzionerà in ambiente Classic Mac OS X. Non lo si
potrà utilizzare se è in esecuzione l'ambiente Classic.
Français
■ Impostazioni audio del software
Collegare l’UA-1X al computer mediante un cavo USB prima
di avviare il software.
89
UA-1X_ALL.book 90 ページ 2003年12月3日 水曜日 午後2時50分
MEMO
UA-1X_ALL.book 91 ページ 2003年12月3日 水曜日 午後2時50分
English
controlador (Macintosh) (pág. 103).
Deutsch
simultáneamente, desconecte todos los aparatos USB que no sean el UA-1X del conector
USB antes de instalar el controlador. Si se deja algún aparato USB conectado que no sea
la unidad USB-1X al instalar el controlador, puede que éste no se instale correctamente.
Para utilizar la unidad UA-1X, primero debe instalar el controlador Dispositivo USB
Composite, el controlador (Dispositivo de interfaz humana USB y el controlador
Dispositivo de audio USB consecutivamente. Windows incluye estos controladores.
Si utiliza Windows 98, este controlador se proporciona con el CD-ROM de Microsoft
Windows, de modo que conviene que tenga dicho CD-ROM a mano.
Français
(Para Windows Me, 2000 o XP, no es necesario.)
¿Qué es un controlador?
Un controlador es software que permite que una programa de aplicaciones que se
ejecuta en su sistema transfiera datos a la unidad UA-1X y viceversa cuando está
conectada al equipo mediante un cable USB.
El controlador transfiere los datos de la aplicación a la unidad UA-1X y de la unidad
UA-1X a la aplicación.
Italiano
fig.05-01.e
Application USB
connector
Español
USB
USB cable
Driver
Computer UA-1X
91
UA-1X_ALL.book 92 ページ 2003年12月3日 水曜日 午後2時50分
92
UA-1X_ALL.book 93 ページ 2003年12月3日 水曜日 午後2時50分
■ Usuarios de Windows Me
1
Con la unidad UA-1X desconectada de su sistema,
English
encienda el sistema e inicie Windows.
Desconecte todos los cables USB excepto el del teclado USB
y el ratón USB (si se utilizan).
2
Utilice un cable USB para conectar la unidad UA-1X
Esta unidad viene equipada
al sistema. con un circuito de protección.
Deutsch
fig.02-03.e Es necesario dejar pasar un
pequeño intervalo de tiempo
3 (de unos segundos) después
Windows detectará la unidad de conectar un conector USB
UA-1X y aparecerá el cuadro para que la unidad funcione
correctamente.
de diálogo “Asistente para
agregar nuevo hardware.”
Asegúrese de que Buscar
automáticamente el controlador
Français
(recomendado) está seleccionado
y haga clic en [Siguiente].
Es posible que este cuadro
de diálogo tarde un tiempo
4 en aparecer.
Empieza la búsqueda del controlador.
5
Una vez se ha encontrado el controlador adecuado,
empieza la instalación del mismo.
Italiano
fig.02-04.e
En función de la configuración
6 de su sistema, después de
Cuando aparezca un cuadro que se haya instalado el
controlador, es posible
de diálogo informándole
que deba esperar un breve
de que la instalación del intervalo de tiempo hasta
controlador ha finalizado, que el sistema reconozca
haga clic en [Finalizar] el dispositivo.
Español
y reinicie Windows.
93
UA-1X_ALL.book 94 ページ 2003年12月3日 水曜日 午後2時50分
■ Usuarios de Windows 98
La instalación debe realizarse en el siguiente orden: primero
el controlador Dispositivo USB Composite, a continuación,
el controlador Dispositivo de interfaz humana USB y, por
último, el controlador Dispositivo de audio USB. Realice
el siguiente procedimiento para llevar a cabo la instalación.
1
Con la unidad UA-1X desconectada de su sistema,
encienda el sistema e inicie Windows.
Desconecte todos los cables USB excepto el del teclado USB
y el ratón USB (si se utilizan).
2
Inserte el CD-ROM de Microsoft Windows en la
unidad de CD-ROM y utilice un cable USB para
conectar el UA-1X al sistema.
Esta unidad viene equipada
con un circuito de protección.
Puesto que algunos sistemas se venden con el contenido Es necesario dejar pasar un
del CD-ROM de Microsoft Windows instalado previamente pequeño intervalo de tiempo
en el disco duro, es posible que el CD-ROM de Microsoft (de unos segundos) después
Windows se incluya. de conectar un conector USB
Si éste es el caso, podrá instalar el controlador sin el CD-ROM para que la unidad funcione
de Microsoft Windows. correctamente.
fig.02-05.e
3
El sistema detectará automá-
ticamente un Dispositivo
USB Composite y aparecerá
el cuadro de diálogo Si no aparece este cuadro
de diálogo, consulte el
“Asistente para agregar apartado Problems related
nuevo hardware.” to the USB driver (pág. 111).
Haga clic en [Siguiente].
fig.02-06.e
4
Cuando la pantalla aparezca un
mensaje en el que se pregunte
“¿Qué desea que haga
Windows?”, seleccione
“Buscar el mejor controlador
para su dispositivo. (Reco-
mendado)” y haga clic en [Siguiente].
94
UA-1X_ALL.book 95 ページ 2003年12月3日 水曜日 午後2時50分
fig.02-07.e
5
Active Unidad de CD-ROM
English
y haga clic en [Siguiente].
fig.02-08.e
6
Haga clic en [Siguiente].
* Dependiendo del sistema, la ubicación
del controlador puede ser diferente
Deutsch
de la que se muestra en la ilustración,
pero esto no supone ningún problema.
7
El archivo (Controlador) se empezará a copiar.
fig.02-09.e
Si no inserta el CD-ROM
de Windows en la unidad
de CD-ROM, puede que
Français
aparezca el cuadro de diálogo
“Insertar disco.” Si esto
ocurre, inserte el CD-ROM
de Microsoft Windows en la
unidad de CD-ROM y haga
clic en [Aceptar].
Italiano
Español
95
UA-1X_ALL.book 96 ページ 2003年12月3日 水曜日 午後2時50分
fig.02-10.e
8
Cuando haya finalizado la
instalación del controlador
Dispositivo USB Composite,
aparecerá el siguiente cuadro
de diálogo. Haga clic en
[Finalizar].
En el paso 6, la pantalla
fig.02-11.e indicará: “Búsqueda del
archivo de controlador para
9 el dispositivo: Dispositivo
A continuación, el sistema de audio USB.”
detectará automáticamente
el Dispositivo de interfaz
humana USB y aparecerá
el cuadro de diálogo
“Asistente para agregar
nuevo hardware.” Haga
clic en [Siguiente] y prosiga
con la instalación tal como
se describe en los pasos
del 4 al 7 (pág. 94-95).
fig.02-12.e
10
Cuando haya finalizado la
instalación del controlador
Dispositivo de interfaz
humana USB, aparecerá el
siguiente cuadro de diálogo.
Haga clic en [Finalizar].
96
UA-1X_ALL.book 97 ページ 2003年12月3日 水曜日 午後2時50分
fig.02-13.e
11
A continuación, se detectará
En el paso 6, la pantalla
English
automáticamente el contro-
indicará: “Búsqueda del
lador Dispositivo de audio archivo de controlador
USB y aparecerá el cuadro para el dispositivo:
de diálogo “Asistente para Dispositivo de audio
USB.”
agregar nuevo hardware.”
Haga clic en [Siguiente] y prosiga con la instalación tal como
se describe en los pasos del 4 al 7 (pág. 94-95).
fig.02-1
Deutsch
12
Cuando la instalación del
controlador Dispositivo de En función del sistema que
utilice, es posible que el cursor
audio USB haya finalizado,
permanezca en forma de reloj
aparecerá un cuadro de de arena durante varios
diálogo como éste. Haga minutos después de que haya
clic en [Finalizar]. hecho clic en [Aceptar], pero
lo único que tiene que hacer
Con esto finaliza la instalación de los controladores
Français
es esperar.
Dispositivo USB Composite, Dispositivo de interfaz humana
USB y Dispositivo de audio USB. Reinicie Windows.
97
UA-1X_ALL.book 98 ページ 2003年12月3日 水曜日 午後2時50分
Configuración y comprobación
2
Entre en “Propiedades de Sonidos y multimedia”
(en Windows 98, “Propiedades multimedia”).
Si utiliza Windows XP, 2000 o Me:
En Panel de control, haga doble clic en el icono Sonidos
y multimedia para abrir el cuadro de diálogo “Propiedades
de Sonidos y multimedia.”
* Si el icono Propiedades de Sonido y multimedia no aparece en
pantalla,
Windows XP:
En Panel de control, haga clic en Dispositivos de sonido,
audio y voz. A continuación, haga clic en Dispositivos
de sonido y audio para acceder al cuadro de diálogo
“Propiedades de dispositivos de sonido y audio.”
Windows Me:
En el marco izquierdo, haga clic en Ver todas las opciones
del Panel de control.
Usuarios de Windows 98:
En Panel de control, haga doble clic en el icono Multimedia
para abrir el cuadro de diálogo Propiedades multimedia.
98
UA-1X_ALL.book 99 ページ 2003年12月3日 水曜日 午後2時50分
3
Haga clic en la ficha Sonido.
Si utiliza Windows XP,
establezca el Dispositivo
4
English
predeterminado para la
Como Dispositivo preferido para la Reproducción
Reproducción de sonido y el
de sonido y para la Grabación de sonido, seleccione Dispositivo predeterminado
USB Audio CODEC o Dispositivo de audio USB. para la Grabación de sonido
en USB Audio CODEC.
Haga clic en y, en la lista que aparece, haga clic en
USB Audio CODEC o en Dispositivo de audio USB
para seleccionarlo. Si utiliza Windows 98,
establezca el Dispositivo
preferido para la Repro-
Deutsch
5 ducción y el Dispositivo
preferido para la Grabación
Haga clic en [Aceptar] para finalizar la configuración.
en USB Audio CODEC.
Français
sitivo de audio USB (1).”
Italiano
Español
99
UA-1X_ALL.book 100 ページ 2003年12月3日 水曜日 午後2時50分
1
Haga clic en el botón Inicio de Windows y seleccione Si no tiene instalada en su
Programas - Accesorios - Entretenimiento - sistema la opción Control
de volumen, utilice la opción
Control de volumen para iniciarlo.
Agregar o quitar programas
Usuarios de Windows XP del Panel de control para
fig.05-16ae_30 instalarla. Para obtener
información detallada sobre
la instalación, consulte el
manual del usuario de
Windows o la ayuda.
Usuarios de Windows Me
fig.02-17.e.eps
100
UA-1X_ALL.book 101 ページ 2003年12月3日 水曜日 午後2時50分
2
Para ajustar el volumen del UA-1X, suba o baje el
Si sube el control de volumen,
deslizador. Puede ajustar los siguientes elementos. hará que el sonido salga del
English
sistema a través de la unidad
UA-1X con la mejor calidad
de sonido.
Audio USB Ajusta el volumen de las salidas
(Altavoz) analógicas (salida de línea y salida
de auriculares). No afecta a la salida
digital (*1). Si la opción Silencio está
Reproductor Ajusta el volumen de la “música del activada o el deslizador está
de CD CD” en la unidad de CD-ROM del en la posición más baja, el
sistema (*2). equipo UA-1X no emitirá
Onda Ajusta el volumen de la señal de salida
Deutsch
ningún sonido.
del aparato de salida de audio
“Dispositivo de audio USB.” La salida
digital y la salida analógica cambiarán.
Sintetizador Ajusta el volumen del sintetizador
SW software incorporado en Windows Si la unidad UA-1X está
* 1 En función de la versión de Windows, puede que aparezca como conectada, Windows no
“conector analógico.” emitirá sonido por los
altavoces del sistema. Puesto
* 2 Si la reproducción del CD no cambia al ajustar este volumen,
que la señal de sonido del
modifique el volumen de Onda. sistema se saldrá por el jack
Français
de auriculares de la unidad
UA-1X o por los jacks de la
línea de salida, en lugar de
hacerlo por los altavoces del
sistema, tendrá que conectar
los auriculares o los altavoces
del sistema a la unidad
UA-1X. Otra alternativa es
conectar los jacks de la línea Italiano
de salida de la unidad UA-1X
a los jacks de la línea de
entrada del sistema.
Español
101
UA-1X_ALL.book 102 ページ 2003年12月3日 水曜日 午後2時50分
102
UA-1X_ALL.book 103 ページ 2003年12月3日 水曜日 午後2時50分
English
* Si es usuario de Windows, consulte el apartado Conexiones e instalación del
controlador (Windows) (pág. 91).
Si inicia el sistema con la unidad UA-1X conectada, puede que el sistema se vuelva
inestable. Si esto sucede, inicie el sistema antes de conectar la unidad UA-1X. Una
vez iniciado, ya puede conectarla.
Deutsch
¿Qué es un controlador?
Un controlador es software que permite que una programa de aplicaciones que se
ejecuta en su sistema transfiera datos a la unidad UA-1X y viceversa cuando está
conectada al equipo mediante un cable USB.
El controlador transfiere los datos de la aplicación a la unidad UA-1X y de la unidad
UA-1X a la aplicación.
fig.05-01.e
Français
Application USB
connector
USB
USB cable
Driver Italiano
Computer UA-1X
103
UA-1X_ALL.book 104 ページ 2003年12月3日 水曜日 午後2時50分
1
Con la unidad UA-1X desconectada, inicie el
Macintosh.
Desconecte todos los cables USB excepto el del teclado USB
y el ratón USB (si se utilizan).
2
Salga de todo el software que se esté ejecutando
(aplicaciones).
Si utiliza un programa antivirus o software similar, también
deberá cerrarlo.
fig.03-02.e
3
Una vez que haya
iniciado el sistema
operativo Mac,
seleccione Apple
System Profiler
del menú Apple.
Aparecerá el cuadro de diálogo “Apple System Profiler.”
4
Haga clic en la ficha Devices and Volumes.
5
Seleccione Update all information en el menú
Commands. Esta unidad viene equipada
con un circuito de protección.
6 Es necesario dejar pasar un
Utilice un cable USB para conectar la unidad UA-1X pequeño intervalo de tiempo
al sistema. (de unos segundos) después
de conectar un conector USB
para que la unidad funcione
correctamente.
104
UA-1X_ALL.book 105 ページ 2003年12月3日 水曜日 午後2時50分
7
Espere unos cinco segundos.
La unidad UA-1X utiliza un controlador que se proporciona
English
con el sistema operativo Mac.
Mientras espera, el contenido de la pantalla no cambiará,
pero el sistema estará detectando la unidad UA-1X. No
toque ni el ratón ni el teclado.
fig.03-04.e
8
Para comprobar que el
sistema ha detectado el
controlador, diríjase otra
Deutsch
vez a Apple System
Profiler y seleccione
Update all information del menú Commands.
En el área USB, aparecerán tres dispositivos de audio.
Français
haga clic en Quit para cerrar “Apple System Profiler.”
Si no se muestran correctamente, desconecte la unidad
UA-1X, espere unos diez segundos y, a continuación,
repita el procedimiento desde el paso 2.
1
En el menú Apple,
seleccione Control
Panels - Sound
para abrir el cuadro
Español
de diálogo Sound.
2
Haga clic en la ficha
Speaker o Speaker
Settings.
105
UA-1X_ALL.book 106 ページ 2003年12月3日 水曜日 午後2時50分
fig.03-06.e
3
Apague el volumen de El contenido de la pantalla que
la unidad UA-1X y del aparecerá variará en función
del sistema operativo y los
equipo de audio y, datos que utilice.
a continuación, haga
clic en [Start Test].
fig.03-07.e
4
Utilice la barra [Main
Volume] para ajustar
el volumen. Cuando
haya finalizado, haga
Dependiendo de la versión del
clic en [Stop Test].
sistema operativo que utilice,
Los sonidos de prueba se la barra Main Volume no
transmiten de izquierda existirá. En ese caso, utilice
la barra Volume, que se
a derecha, junto con lo
encuentra en Output,
que aparece en pantalla.
para ajustar el volumen.
fig.03-08.e
5
En el cuadro de diálogo
Sound, haga clic en
Si no aparece USB audio,
la ficha Input.
cierre el cuadro de diálogo
En la opción Choose “Sound” y desconecte el cable
a source for sound input, USB de la unidad UA-1X del
seleccione USB audio. Macintosh. Vuelva a instalar
el controlador (pág. 104).
* No active “Play sound
through output device.”
106
UA-1X_ALL.book 107 ページ 2003年12月3日 水曜日 午後2時50分
6
Cuando haya acabado con la configuración, cierre el
cuadro de diálogo “Sound.”
English
Seleccione Quit en el menú File.
Deutsch
ruidos en la grabación. Los ruidos sólo deben oírse en la señal de reproducción.
• El controlador estándar que se proporciona con el sistema operativo Mac no es
compatible con ASIO.
Français
Italiano
Español
107
UA-1X_ALL.book 108 ページ 2003年12月3日 水曜日 午後2時50分
■ Establecimiento de conexiones
y configuración de la entada/salida
de sonido del sistema
La unidad UZ-1X no se puede
utilizar en el entorno Classic
1 de Mac OS X.
Utilice un cable USB para conectar la unidad UA-1X
a su Macintosh.
2
Abra el cuadro de diálogo System Preference y haga
clic en Sound.
fig.macX-1
3
En la ficha Sound Effects,
haga clic en la opción Play
alerts and sound effects
through y elija USB Audio
CODEC como aparato de
reproducción para los efectos
de sonido.
figmacX-2, macOSX-3.
4
Haga clic en la ficha Output
y elija USB Audio CODEC
Si no se oye ningún sonido por
como el aparato por el que el altavoz (altavoz interno) de
se emitirá el sonido. Macintosh, elija la opción
Built-in audio controller y en
la ficha Output.
108
UA-1X_ALL.book 109 ページ 2003年12月3日 水曜日 午後2時50分
figmacX-2, macOSX-3.
5
Si la ficha Input se visualiza,
English
elija USB Audio CODEC
como el aparato de entrada
de sonidos.
Deutsch
Asegúrese de seguir las siguientes indicaciones antes de utilizar el software.
• Utilice un cable USB para conectar la unidad UA-1X al sistema antes
de iniciar el software.
• No desconecte el cable USB de la unidad UA-1X mientras el software
se esté ejecutando.
• Cierre el software antes de desconectar el cable USB de la unidad
UA-1X.
• Desactive el valor de modo de suspensión (Sleep) del Macintosh.
• La unidad UA-1X no funcionará en el entorno Classic de Mac OS X.
No se puede utilizar si se está ejecutando el entorno Classic.
Français
■ Configuración del software de sonido
Utilice un cable USB para conectar la unidad UA-1X al
sistema antes de iniciar el software.
• Si graba o reproduce al mismo tiempo, es posible que oiga ruidos o que el sonido
vaya y venga, debido a una sobrecarga de la CPU. Sin embargo, no deben oírse
ruidos en la grabación. Los ruidos sólo deben oírse en la señal de reproducción.
• El controlador estándar que se proporciona con el sistema operativo Mac no es
compatible con ASIO.
109
UA-1X_ALL.book 110 ページ 2003年12月3日 水曜日 午後2時50分
MEMO
UA-1X_ALL.book 111 ページ 2003年12月3日 水曜日 午後2時50分
Troubleshooting
If an unexpected problem occurs while using the UA-1X, please read this chapter
first. It provides numerous hints that will help you solve problems.
The problems covered in the troubleshooting section are organized according
to the operating system on which the problem might be encountered.
The problems covered in the troubleshooting section are organized according to
the operating system on which the problem might be encountered. Use the icon
shown at the left of the title to find the information you need.
Troubleshooting
If you are using computer for the first time, or do not understand the explanation
of a procedure, refer to the owner’s manuals for your computer or for OS.
If the UA-1X does not operate as you expect, check the following points.
111
UA-1X_ALL.book 112 ページ 2003年12月3日 水曜日 午後2時50分
Troubleshooting
• Does your computer or USB hub have sufficient power supply capacity?
The UA-1X cannot be connected if insufficient power is supplied to it. Check
whether one of the following cases apply.
If you are using the UA-1X with a notebook computer that is running on its
battery, operation may be unreliable with some models of computer. If this is
the case, connect the AC adaptor to your notebook computer.
The power conservation mode of your computer may limit the power that is
supplied to USB. Check the settings of your computer.
In some cases, the UA-1X cannot be used with a bus-powered hub (a hub that
does not contain a power supply). Please use a self-powered hub (a hub that
contains a power supply).
3. Double-click Other devices (Universal Serial Bus controllers) to see the list
of devices.
4. From the list, select the unknown device and click Delete.
* In order to check whether or not the “Unknown Device” is the UA-1X,
disconnect the USB cable of the UA-1X, and verify that “Unknown Device”
has disappeared. Then connect the UA-1X once again, and delete “Unknown
Device.”
112
UA-1X_ALL.book 113 ページ 2003年12月3日 水曜日 午後2時50分
Troubleshooting
No sound
Å@fig.win
• Are you attempting to use the CD player of your computer to play an
audio CD?
If you wish to play an audio CD on the CD-ROM drive of your computer, refer
to When using your computer’s CD-ROM drive to play an audio CD, or when
playing background music for games with the UA-1X (p. 22).
Å@fig.win
• Are you running multiple applications?
If multiple applications are running simultaneously, an error message may
appear. If this occurs, click [OK], and close the other applications.
Even if an application window is closed, it is still running if it remains in the
taskbar, so be sure to quit any unneeded applications shown in the taskbar.
fig.winmac
• Have you specified the audio data output destination for your operating
system?
You must specify the UA-1X as the audio data output destination for your
computer. For details on this setting, refer to Specifying the Audio Input/Output
Device (p. 19) or Adjusting the Sound Input/Output (p. 25).
113
UA-1X_ALL.book 114 ページ 2003年12月3日 水曜日 午後2時50分
Troubleshooting
fig.winmac
• Have the drivers been installed correctly?
In order to playback audio data using the UA-1X, the USB Audio Device driver
must be installed. For details on installation and settings, refer to Connections
and driver installation (Windows p. 13, Macintosh p. 23).
Å@fig.mac
• If you are using Macintosh OS X, some system sound input/output
settings may cause there to be no sound from the Macintosh speakers.
Select “Internal speakers” in the Output tab. (→ Make Connections and System
Sound Input/Output Settings (p. 28))
fig.winmac
• Could you have turned down the UA-1X's Headphones volume control?
Check this if you are using headphones.
fig.winmac
• As soon as you connect the UA-1X to your computer, sound will no longer
be output from the speakers of your computer.
Connect external monitors or headphones to the UA-1X.
If you want sound to be output from your computer speakers, disconnect the
UA-1X from your computer.
Sound is distorted
• Could the Input select switch be set to LOW?
The sound may be distorted if the INPUT SELECT switch is set to LOW and you
input an audio signal higher than -10 dBu from the line input jacks. Set the INPUT
SELECT switch to HIGH.
• Could you have updated your software while the UA-1X was connected to
your computer?
Disconnect the UA-1X from your computer before you update your software.
114
UA-1X_ALL.book 115 ページ 2003年12月3日 水曜日 午後2時50分
Troubleshooting
4. In the Display Properties dialog box, click [OK] to close the dialog box.
115
UA-1X_ALL.book 116 ページ 2003年12月3日 水曜日 午後2時50分
Troubleshooting
fig.winmacac
• Are many applications running on your computer?
If you use numerous applications during playback, or start up another
application, the playback may be interrupted depending on your computer
system. Exit all unneeded applications, and try again. If this does not resolve
the problem, try restarting your computer.
fig.win
• Try making the following changes to the disk drive settings.
Some computers may not have the following settings.
4. From the list, select GENERIC IDE DISK TYPE**, and click Properties to
access the GENERIC IDE DISK TYPE** Properties dialog box.
* In the ** field of GENERIC IDE DISK TYPE**, there will be a number that
differs depending on your computing environment.
5. Click the Settings tab, place a check mark in the check box for the DMA
option, and click [OK] to close the dialog box.
* Depending on your system, a dialog box for DMA settings may appear. Verify
the contents of the dialog box, and click [OK] or [Cancel].
6. In System Properties dialog box, click [OK] to close the dialog box.
7. Restart your computer so that the above settings will take effect.
fig.win
• On some computers, the Power Management settings in the Control Panel
may cause audio playback to stop.
The Power Management Properties that are displayed when you double-click
Power Management will differ depending on your computer system. One
example is given below, but you should consult the owner’s manual for your
computer as well. Some computers may not have the following settings.
1. Click the Windows Start button, and select Settings - Control Panel to
open the Control Panel.
5. From the list, select Advanced Power Management Support. Then click
Properties to open the Advanced Power Management Support
Properties dialog box.
6. Click the Settings tab, and in Troubleshooting, place a check in the check
box for Don’t Poll Power Supply Status. Then click [OK].
8. Restart Windows.
116
UA-1X_ALL.book 117 ページ 2003年12月3日 水曜日 午後2時50分
Troubleshooting
fig.winmacac
• Try increasing the memory
You can increase the processing power of your computer by adding more
memory. For details on how to install more memory, refer to the operation
manual for your computer.
fig.winmacac
• Does your computer meet the USB specifications?
The audio may be interrupted if you are using a computer that does not
electrically meet the USB specifications. In such cases, you may be able to solve
the problem by connecting a USB hub that contains a power supply.
117
UA-1X_ALL.book 118 ページ 2003年12月3日 水曜日 午後2時50分
Troubleshooting
4. In the USB section, the screen will indicate “Audio (USB Audio Device).”
Click the arrow at the left of this text.
5. The number displayed to the right of “Driver version” is the version of the
USB audio driver.
118
UA-1X_ALL.book 119 ページ 2003年12月3日 水曜日 午後2時50分
Troubleshooting
● If installation of the USB Audio Device driver was terminated before completion
Use the following procedure to delete the driver that is already installed.
Depending on your computer, some of the folder names may be different.
2. Delete the USB Audio Device driver. Click the Windows Start button, and
select Settings - Control Panel. (In Windows XP, click the Start button
and then click Control Panel.)
6. From the list, select USB Audio Device, and click Remove (In Windows
XP, Disable). In the Confirm Device Removal dialog box, click [OK].
If USB Audio Device is not displayed, proceed to step 8.
* If a dialog box suggesting that you restart Windows appears at this point, follow
the suggestion and restart your computer.
7. Make sure that USB Audio Device is not in the Sound, video and game
controllers list, and click [Close] to close the System Properties dialog.
8. Follow the steps 1.–4. again, and double-click Universal Serial Bus
controllers to display the list of devices.
9. Disconnect the USB cable from your computer, and restart Windows.
119
UA-1X_ALL.book 120 ページ 2003年12月3日 水曜日 午後2時50分
Specifications
UA-1X: USB Audio Interface
●Number of Audio Record/Playback Channels
Record: 1 pair of stereo
Playback: 1 pair of stereo
●Signal Processing
PC interface: 16 bits
●Sampling Frequency
Digital output: 32/44.1/48 kHz
●Nominal Input Level
Line input jacks: -10 dBu (LOW)/+4 dBu (HIGH)
●Nominal Output Level
Line output jacks: -10 dBu
●Interface
USB
Digital output
Optical type (confirms to S/P DIF consumer format)
●Connectors
Line Input jacks (L, R): RCA phono type
Line Output jacks (L, R): RCA phono type
Headphones jack (Stereo miniature phone type)
Digital Output connector (Optical type)
* The same jack serves as both the headphones jack and digital output connector.
●Power Supply
Supplied from the computer
●Current Draw
100 mA
●Dimensions
90 (W) x 60 (D) x 23 (H) mm
3-9/16 (W) x 2-3/8 (D) x 15/16 (H) inches
●Weight
120 g/ 5 oz
●Accessories
Owner's Manual
(0 dBu = 0.775 V rms)
962a
120
UA-1X_ALL.book 121 ページ 2003年12月3日 水曜日 午後2時50分
MEMO
UA-1X_ALL.book 122 ページ 2003年12月3日 水曜日 午後2時50分
MEMO
To resize thickness, move all items on the front cover
and registration marks to left or right.
For EU Countries
This product complies with the requirements of European Directive 89/336/EEC.
2
To resize thickness, move all items on the front cover
and registration marks to left or right.
Information
When you need repair service, call your nearest EDIROL/Roland Service Center or authorized EDIROL/Roland distributor
in your country as shown below.
Owner’s Manual
Av.Santa Fe 2055
http://www.edirol.com/europe INDIA (1123) Buenos Aires STOLLAS S.A.
Deutschland
Rivera Digitec (India) Pvt. Ltd.
409, Nirman Kendra Mahalaxmi
ARGENTINA
Music Sound Light MIDDLE EAST
TEL: 0700 33 47 65 20 TEL: (011) 4508-2700
Flats Compound Off. Dr. Edwin 155, New National Road
France Patras 26442, GREECE BAHRAIN
TEL: 0810 000 371
Moses Road, Mumbai-400011, BRAZIL TEL: 2610 435400
INDIA Moon Stores
Italia TEL: (022) 2493 9051
Roland Brasil Ltda
No.16, Bab Al Bahrain Avenue,
TEL: 02 93778329 Rua San Jose, 780 Sala B HUNGARY P.O.Box 247, Manama 304,
Parque Industrial San Jose
INDONESIA Roland East Europe Ltd. State of BAHRAIN
U. S. A. / CANADA PT Citra IntiRama
Cotia - Sao Paulo - SP, BRAZIL Warehouse Area ‘DEPO’ Pf.83 TEL: 211 005
TEL: (011) 4615 5666
EDIROL Corporation North J1. Cideng Timur No. 15J-150 H-2046 Torokbalint, HUNGARY
Owner’s Manual
America Jakarta Pusat CHILE TEL: (23) 511011 CYPRUS
425 Sequoia Drive, Suite 114 INDONESIA Comercial Fancy II S.A. Radex Sound Equipment Ltd.
Bellingham, WA 98226 TEL: (021) 6324170 IRELAND 17, Diagorou Street, Nicosia,
Rut.: 96.919.420-1
U. S. A. Roland Ireland CYPRUS
Nataniel Cox #739, 4th Floor
TEL: (360) 594-4276 KOREA G2 Calmount Park, Calmount TEL: (022) 66-9426
Bedienungsanleitung
Santiago - Centro, CHILE
FAX: (360) 594-4271 Avenue, Dublin 12
Cosmos Corporation TEL: (02) 688-9540
http://www.edirol.com/ 1461-9, Seocho-Dong,
Republic of IRELAND IRAN
Seocho Ku, Seoul, KOREA MEXICO TEL: (01) 4294444 MOCO, INC.
TEL: (02) 3486-8855 No.41 Nike St., Dr.Shariyati Ave.,
Casa Veerkamp, s.a. de c.v. ITALY
Mode d’emploi
Roberoye Cerahe Mirdamad
Av. Toluca No. 323, Col. Olivar
MALAYSIA de los Padres 01780 Mexico D.F.
Roland Italy S. p. A. Tehran, IRAN
Viale delle Industrie 8, TEL: (021) 285-4169
BENTLEY MUSIC SDN BHD MEXICO
AFRICA 140 & 142, Jalan Bukit Bintang TEL: (55) 5668-6699
20020 Arese, Milano, ITALY
TEL: (02) 937-78300 ISRAEL
Manuale d’uso
55100 Kuala Lumpur, MALAYSIA
TEL: (03) 2144-3333 URUGUAY Halilit P. Greenspoon &
EGYPT Todo Musica S.A. NORWAY Sons Ltd.
Al Fanny Trading Office PHILIPPINES Francisco Acuna de Figueroa 1771 Roland Scandinavia Avd. 8 Retzif Ha’aliya Hashnya St.
9, EBN Hagar A1 Askalany Street, C.P.: 11.800 Kontor Norge Tel-Aviv-Yafo ISRAEL
G.A. Yupangco & Co. Inc.