Professional Documents
Culture Documents
M.L. Campbell Selection Guide
M.L. Campbell Selection Guide
Cougar standard with the new 1/8” fluid hose and 1/4” air hose (53-404A) and be
designated by the part # OB14.
Bobcat
53-402A OC14-W5
AAA 25’ HOSE SET WALL MOUNT
OC14-C5
(Available in 50’
CART MOUNT OC14-W55
and 100’ sets)
WALL MOUNT
53-404A OB14-W5
AAA 25’ HOSE SET WALL MOUNT
OB14-C5
(Available in 50’
CART MOUNT OB14-W55
and 100’ sets)
WALL MOUNT
CAT-X
CAT-EXtreme (HVLP / Pressure Reduced)
C.A.Technologies is proud to introduce our new CAT-X professional grade spray
gun. The CAT-X provides extreme atomization, handle ergonomics, and fluid
delivery superior to all the competitive guns on the market today. The CAT-X
includes the HVLP air cap and the pressure reduced air cap to meet all the
codes and regulations throughout the United States. The CAT-X comes in five
distinctive handle designs, allowing you to customize your finishing experience.
CPR CP-J100H
CAT Pressure Reduced Low CFM HVLP - Gravity
The CPR spray guns from CAT combine the transfer The J100H is our low CFM gravity feed spray
efficiency of HVLP with the speed and finish gun. The 21-1090 air cap only uses 6
quality of conventional air spray. The CPR guns are CFM, which enables the Jaguar 100H to
available in both the pressure and gravity versions be operated with a 2 HP compressor. This setup
and include the new CPR air cap and the HVLP air is designed for use with a low air consumption
cap, along with 3 different needle and nozzle compressor.
sizes, multipurpose wrench, nozzle wrench,
cleaning brush and mini regulator. These kits
will also be available with your standard pressure
or gravity cups or the more popular 3M PPS. CP-FELCFM
Low CFM HVLP - Pressure
TJR. Techline JR. HVLP (Glaze) The FE-Line LCFM HVLP is our low CFM
The Techline TJR is an economically priced gravity lightweight ergonomic spray gun. The
feed mini gun for use with a range of coatings from 21-1090 air cap only uses 6 CFM, which
top coats to stains. This is great for all your touch enables the FE-Line LCFM to be operated with a
up needs. 2 HP compressor. This setup is designed for use with
a low air consumption compressor.
Coating Atomization Technologies: 337 S. Arthur Ave. Louisville, CO 80027 Tel: 888.820.4498 Fax: 303.438.5708
www.spraycat.com
Set-Up Recommendations for
C L E AR T OP C OAT S (P OS T -C AT AL YZE D )
M A T ERIA L REDUC T ION GUN / T EC HNOL OGY T IP / A IR C A P A IR PRESS. FL UID PRESS.
Kr ys tal Reduc e as needed to meet V is c ios ity CP-FELCFM 1.3 X 1090 15 PSI 5-7 PSI
V ISCOSITY FORD #4 25-30 SECONDS Reduc e as needed to meet V is c ios ity CP-J100H 1.4 X 1090 15 PSI GRA V ITY
Reduc e as needed to meet V is c ios ity CPR 1.3 X 2101 29 PSI 5-7 PSI
Reduc e as needed to meet V is c ios ity CPR-G-W 1.5 X 2101 29 PSI GRA V ITY
Reduc e as needed to meet V is c ios ity CA T-X 1.5 X 1352 35 PSI GRA V ITY
Reduc e as needed to meet V is c ios ity OC14 OR OB14 411 15-18 PSI 420 PSI
Kle ar V ar Reduc e as needed to meet V is c ios ity CP-FELCFM 1.3 X 1090 15 PSI 5-7 PSI
V ISCOSITY FORD #4 15-19 SECONDS Reduc e as needed to meet V is c ios ity CP-J100H 1.4 X 1090 15 PSI GRA V ITY
Reduc e as needed to meet V is c ios ity CPR 1.3 X 2101 29 PSI 5-7 PSI
Reduc e as needed to meet V is c ios ity CPR-G-W 1.5 X 2101 29 PSI GRA V ITY
Reduc e as needed to meet V is c ios ity CA T-X 1.5 X 1352 35 PSI GRA V ITY
Reduc e as needed to meet V is c ios ity OC14 OR OB14 411 15-18 PSI 375 PSI
Du r aV ar Reduc e as needed to meet V is c ios ity CP-FELCFM 1.3 X 1090 15 PSI 5-7 PSI
V ISCOSITY FORD #4 25-30 SECONDS Reduc e as needed to meet V is c ios ity CP-J100H 1.4 X 1090 15 PSI GRA V ITY
Reduc e as needed to meet V is c ios ity CPR 1.3 X 2101 29 PSI 5-7 PSI
Reduc e as needed to meet V is c ios ity CPR-G-W 1.5 X 2101 29 PSI GRA V ITY
Reduc e as needed to meet V is c ios ity CA T-X 1.5 X 1352 35 PSI GRA V ITY
Reduc e as needed to meet V is c ios ity OC14 OR OB14 411 15-18 PSI 375 PSI
En vir o V ar Reduc e as needed to meet V is c ios ity CP-FELCFM 1.3 X 1090 15 PSI 5-7 PSI
V ISCOSITY FORD #4 20 SECONDS Reduc e as needed to meet V is c ios ity CP-J100H 1.4 X 1090 15 PSI GRA V ITY
Reduc e as needed to meet V is c ios ity CPR 1.3 X 2101 29 PSI 5-7 PSI
Reduc e as needed to meet V is c ios ity CPR-G-W 1.5 X 2101 29 PSI GRA V ITY
Reduc e as needed to meet V is c ios ity CA T-X 1.5 X 1352 35 PSI GRA V ITY
Reduc e as needed to meet V is c ios ity OC14 OR OB14 411 15-18 PSI 375 PSI
Hig h Pe r fo r m an ce Reduc e as needed to meet V is c ios ity CP-FELCFM 1.3 X 1090 15 PSI 5-7 PSI
C o n ve r s io n V ar n is h Reduc e as needed to meet V is c ios ity CP-J100H 1.4 X 1090 15 PSI GRA V ITY
V ISCOSITY FORD #4 15 SECONDS Reduc e as needed to meet V is c ios ity CPR 1.3 X 2101 29 PSI 5-7 PSI
Reduc e as needed to meet V is c ios ity CPR-G-W 1.5 X 2101 29 PSI GRA V ITY
Reduc e as needed to meet V is c ios ity CA T-X 1.5 X 1352 35 PSI GRA V ITY
Reduc e as needed to meet V is c ios ity OC14 OR OB14 411 15-18 PSI 375 PSI
S E AL E R (P OS T -C AT AL YZE D )
M A T ERIA L REDUC T ION GUN / T EC HNOL OGY T IP / A IR C A P A IR PRESS. FL UID PRESS.
Kr ys tal Se ale r Reduc e as needed to meet V is c ios ity CP-FELCFM 1.3 X 1090 15 PSI 5-7 PSI
V ISCOSITY FORD #4 25-30 SECONDS Reduc e as needed to meet V is c ios ity CP-J100H 1.4 X 1090 15 PSI GRA V ITY
Reduc e as needed to meet V is c ios ity CPR 1.3 X 2101 29 PSI 5-7 PSI
Reduc e as needed to meet V is c ios ity CPR-G-W 1.5 X 2101 29 PSI GRA V ITY
Reduc e as needed to meet V is c ios ity CA T-X 1.5 X 1352 35 PSI GRA V ITY
Reduc e as needed to meet V is c ios ity OC14 OR OB14 411 15-18 PSI 375 PSI
L e ve l Se ale r Reduc e as needed to meet V is c ios ity CP-FELCFM 1.3 X 1090 15 PSI 5-7 PSI
V ISCOSITY FORD #4 25-30 SECONDS Reduc e as needed to meet V is c ios ity CP-J100H 1.4 X 1090 15 PSI GRA V ITY
Reduc e as needed to meet V is c ios ity CPR 1.3 X 2101 29 PSI 5-7 PSI
Reduc e as needed to meet V is c ios ity CPR-G-W 1.5 X 2101 29 PSI GRA V ITY
Reduc e as needed to meet V is c ios ity CA T-X 1.5 X 1352 35 PSI GRA V ITY
Reduc e as needed to meet V is c ios ity OC14 OR OB14 411 15-18 PSI 375 PSI
C L E AR T OP C OAT S (P R E -C AT AL YZE D )
M A T ERIA L REDUC T ION GUN / T EC HNOL OGY T IP / A IR C A P A IR PRESS. FL UID PRESS.
M ag n aKle ar Reduc e as needed to meet V is c ios ity CP-FELCFM 1.3 X 1090 15 PSI 5-7 PSI
V ISCOSITY FORD #4 25-30 SECONDS Reduc e as needed to meet V is c ios ity CP-J100H 1.4 X 1090 15 PSI GRA V ITY
Reduc e as needed to meet V is c ios ity CPR 1.3 X 2101 29 PSI 5-7 PSI
Reduc e as needed to meet V is c ios ity CPR-G-W 1.5 X 2101 29 PSI GRA V ITY
Reduc e as needed to meet V is c ios ity CA T-X 1.5 X 1352 35 PSI GRA V ITY
Reduc e as needed to meet V is c ios ity OC14 OR OB14 411 15-18 PSI 420 PSI
M ag n aM ax Reduc e as needed to meet V is c ios ity CP-FELCFM 1.3 X 1090 15 PSI 5-7 PSI
V ISCOSITY FORD #4 25-30 SECONDS Reduc e as needed to meet V is c ios ity CP-J100H 1.4 X 1090 15 PSI GRA V ITY
Reduc e as needed to meet V is c ios ity CPR 1.3 X 2101 29 PSI 5-7 PSI
Reduc e as needed to meet V is c ios ity CPR-G-W 1.5 X 2101 29 PSI GRA V ITY
Reduc e as needed to meet V is c ios ity CA T-X 1.5 X 1352 35 PSI GRA V ITY
Reduc e as needed to meet V is c ios ity OC14 OR OB14 411 15-18 PSI 420 PSI
Hig h Pe r fo r m an ce Reduc e as needed to meet V is c ios ity CP-FELCFM 1.3 X 1090 15 PSI 5-7 PSI
WW Pr e -C at C le ar Reduc e as needed to meet V is c ios ity CP-J100H 1.4 X 1090 15 PSI GRA V ITY
V ISCOSITY FORD #4 25-30 SECONDS Reduc e as needed to meet V is c ios ity CPR 1.3 X 2101 29 PSI 5-7 PSI
Reduc e as needed to meet V is c ios ity CPR-G-W 1.5 X 2101 29 PSI GRA V ITY
Reduc e as needed to meet V is c ios ity CA T-X 1.5 X 1352 35 PSI GRA V ITY
Reduc e as needed to meet V is c ios ity H20 OC14 OR OB14 409F 17 PSI 350 PSI
Coating Atomization Technologies: 337 S. Arthur Ave. Louisville, CO 80027 Tel: 888.820.4498 Fax: 303.438.5708
www.spraycat.com
Set-Up Recommendations for
S E AL E R (P R E -C AT AL YZE D )
M A T ERIA L REDUC T ION GUN / T EC HNOL OGY T IP / A IR C A P A IR PRESS. FL UID PRESS.
M ag n aSan d Se ale r Reduc e as needed to meet V is c os ity CP-FELCFM 1.3 X 1090 15 PSI 4-6 PSI
V ISCOSITY FORD #4 20-25 SECONDS Reduc e as needed to meet V is c os ity CP-J100H 1.4 X 1090 15 PSI GRA V ITY
Reduc e as needed to meet V is c os ity CPR 1.3 X 2101 29 PSI 4-6 PSI
Reduc e as needed to meet V is c os ity CPR-G-W 1.5 X 2101 29 PSI GRA V ITY
Reduc e as needed to meet V is c os ity CA T-X 1.5 X 1352 35 PSI GRA V ITY
Reduc e as needed to meet V is c os ity OC14 OR OB14 411 15-18 PSI 375 PSI
S E AL E R (V IN YL )
M A T ERIA L REDUC T ION GUN / T EC HNOL OGY T IP / A IR C A P A IR PRESS. FL UID PRESS.
W ate r W h ite V in yl Se ale r Reduc e as needed to meet V is c os ity CP-FELCFM 1.3 X 1090 15 PSI 4-6 PSI
V ISCOSITY FORD #4 13-18 SECONDS Reduc e as needed to meet V is c os ity CP-J100H 1.4 X 1090 15 PSI GRA V ITY
Reduc e as needed to meet V is c os ity CPR 1.3 X 2101 29 PSI 4-6 PSI
Reduc e as needed to meet V is c os ity CPR-G-W 1.3 X 2101 29 PSI GRA V ITY
Reduc e as needed to meet V is c os ity CA T-X 1.3 X 1352 35 PSI GRA V ITY
Reduc e as needed to meet V is c os ity OC14 OR OB14 411 15-18 PSI 350 PSI
Qu ick Dr y V in yl Se ale r Reduc e as needed to meet V is c os ity CP-FELCFM 1.3 X 1090 15 PSI 4-6 PSI
V ISCOSITY FORD #4 13-18 SECONDS Reduc e as needed to meet V is c os ity CP-J100H 1.4 X 1090 15 PSI GRA V ITY
Reduc e as needed to meet V is c os ity CPR 1.3 X 2101 29 PSI 4-6 PSI
Reduc e as needed to meet V is c os ity CPR-G-W 1.3 X 2101 29 PSI GRA V ITY
Reduc e as needed to meet V is c os ity CA T-X 1.3 X 1352 35 PSI GRA V ITY
Reduc e as needed to meet V is c os ity OC14 OR OB14 411 15-18 PSI 350 PSI
Coating Atomization Technologies: 337 S. Arthur Ave. Louisville, CO 80027 Tel: 888.820.4498 Fax: 303.438.5708
www.spraycat.com
Set-Up Recommendations for
P R IM E R S /U N D E R C OAT E R S (P R E -C AT AL YZE D )
M A T ERIA L REDUC T ION GUN / T EC HNOL OGY T IP / A IR C A P A IR PRESS. FL UID PRESS.
M ag n aC law 10% C-160-36 Standard Thinner CP-FELCFM 1.3 X 1090 15 PSI 5-7 PSI
V ISCOSITY FORD #4 40-50 SECONDS 10% C-160-36 Standard Thinner CP-J100H 1.7 X 1090 15 PSI GRA V ITY
10% C-160-36 Standard Thinner CPR 1.3 X 2101 29 PSI 5-7 PSI
10% C-160-36 Standard Thinner CPR-G-W 1.7 X 2101 29 PSI GRA V ITY
10% C-160-36 Standard Thinner CA T-X 1.7 X 1352 35 PSI GRA V ITY
10% C-160-36 Standard Thinner OC14 OR OB14 409 15-18 PSI 490 PSI
unreduc ed OC14 OR OB14 411 15-18 PSI 490 PSI
Qu ick Dr y V in yl Pr im e r No Reduc tion Nec es s ary CP-FELCFM 1.3 X 1090 15 PSI 5-7 PSI
V ISCOSITY FORD #4 40-50 SECONDS No Reduc tion Nec es s ary CP-J100H 1.7 X 1090 15 PSI GRA V ITY
No Reduc tion Nec es s ary CPR 1.3 X 2101 29 PSI 5-7 PSI
No Reduc tion Nec es s ary CPR-G-W 1.7 X 2101 29 PSI GRA V ITY
No Reduc tion Nec es s ary CA T-X 1.7 X 1352 35 PSI GRA V ITY
No Reduc tion Nec es s ary OC14 OR OB14 409 15-18 PSI 490 PSI
No Reduc tion Nec es s ary OC14 OR OB14 411 15-18 PSI 490 PSI
S T AIN S /D YE S
M A T ERIA L REDUC T ION GUN / T EC HNOL OGY T IP / A IR C A P A IR PRESS. FL UID PRESS.
A m az in g Stain Reduc e as needed to meet V is c os ity TJR 1.2 10 PSI GRA V ITY
Reduc e as needed to meet V is c os ity CPR-G-W 1.0 X 1301 12-15 PSI GRA V ITY
Reduc e as needed to meet V is c os ity CA T-X 1.0 X 1411 12-15 PSI GRA V ITY
Reduc e as needed to meet V is c os ity CP-J100H 1.0 X 1090 8-10 PSI GRA V ITY
Reduc e as needed to meet V is c os ity CP-FELCFM .8 X 1090 8-10 PSI 2-4 PSI
Reduc e as needed to meet V is c os ity CPR .8 X 2101 12-16 PSI 2-4 PSI
W o o d So n g II 2.5% Reduc e as needed to meet V is c os ity TJR 1.2 10 PSI GRA V ITY
Sp r ay On ly Stain Bas e Reduc e as needed to meet V is c os ity CPR-G-W 1.0 X 1301 12-15 PSI GRA V ITY
Reduc e as needed to meet V is c os ity CA T-X 1.0 X 1411 12-15 PSI GRA V ITY
Reduc e as needed to meet V is c os ity CP-J100H 1.0 X 1090 8-10 PSI GRA V ITY
Reduc e as needed to meet V is c os ity CP-FELCFM .8 X 1090 8-10 PSI 2-4 PSI
Reduc e as needed to meet V is c os ity CPR .8 X 2101 12-16 PSI 2-4 PSI
M icr o to n Dye s Reduc e as needed to meet V is c os ity TJR 1.2 10 PSI GRA V ITY
V ISCOSITY FORD #4 8-9 SECONDS Reduc e as needed to meet V is c os ity CPR-G-W 1.0 X 1301 12-15 PSI GRA V ITY
Reduc e as needed to meet V is c os ity CA T-X 1.0 X 1411 12-15 PSI GRA V ITY
Reduc e as needed to meet V is c os ity CP-J100H 1.0 X 1090 8-10 PSI GRA V ITY
Reduc e as needed to meet V is c os ity CP-FELCFM .8 X 1090 8-10 PSI 2-4 PSI
Reduc e as needed to meet V is c os ity CPR .8 X 2101 12-16 PSI 2-4 PSI
GL AZE S
M A T ERIA L REDUC T ION GUN / T EC HNOL OGY T IP / A IR C A P A IR PRESS. FL UID PRESS.
V in tag e A lk yd Glaz e Reduc e as needed to meet V is c os ity TJR-GLA Z E GLA Z E TIP 0 PSI GRA V ITY
V ISCOSITY FORD #4 15-17 SECONDS Reduc e as needed to meet V is c os ity TJR 1.2 10 PSI GRA V ITY
Reduc e as needed to meet V is c os ity CPR-G-W 1.0 X 1301 12-15 PSI GRA V ITY
Reduc e as needed to meet V is c os ity CA T-X 1.0 X 1411 12-15 PSI GRA V ITY
Reduc e as needed to meet V is c os ity CP-J100H 1.0 X 1090 8-10 PSI GRA V ITY
A m az in g Glaz e Reduc e as needed to meet V is c os ity TJR-GLA Z E GLA Z E TIP 0 PSI GRA V ITY
V ISCOSITY FORD #4 9-11 SECONDS Reduc e as needed to meet V is c os ity TJR 1.2 10 PSI GRA V ITY
Reduc e as needed to meet V is c os ity CPR-G-W 1.0 X 1301 12-15 PSI GRA V ITY
Reduc e as needed to meet V is c os ity CA T-X 1.0 X 1411 12-15 PSI GRA V ITY
Reduc e as needed to meet V is c os ity CP-J100H 1.0 X 1090 8-10 PSI GRA V ITY
Reduc e as needed to meet V is c os ity CP-FELCFM .8 X 1090 8-10 PSI 2-4 PSI
Reduc e as needed to meet V is c os ity CPR .8 X 2101 12-16 PSI 2-4 PSI
Coating Atomization Technologies: 337 S. Arthur Ave. Louisville, CO 80027 Tel: 888.820.4498 Fax: 303.438.5708
www.spraycat.com
Set-Up Recommendations for
SEALERS
M ATERIAL REDUCTION GUN / TECHNOLOGY TIP / AIR CAP AIR PRESS. FLUID PRESS.
High Pe rform ance 5% Water CP-FELCFM 1.3 X 1090 15 PSI 7-9 PSI
Wate r Borne Pr oduction Se ale r 5% Water CP-J100H 1.7 X 1090 15 PSI GRA V ITY
V ISCOSITY FORD #4 25 SECONDS 5% Water H20-CPR 1.3 X 2101 29 PSI 7-9 PSI
5% Water H20-CPR-G-W 1.7 X 2101 29 PSI GRA V ITY
5% Water CA T-X 1.7 X 1352 35 PSI GRA V ITY
5% Water H20 OC14 OR OB14 409F 17 PSI 350 PSI
Aguale nte Se ale r 5% Water CP-FELCFM 1.3 X 1090 15 PSI 5-7 PSI
V ISCOSITY FORD #4 35-45 SECONDS 5% Water CP-J100H 1.7 X 1090 15 PSI GRA V ITY
5% Water H20-CPR 1.3 X 2101 29 PSI 5-7 PSI
5% Water H20-CPR-G-W 1.7 X 2101 29 PSI GRA V ITY
5% Water CA T-X 1.7 X 1352 35 PSI GRA V ITY
5% Water H20 OC14 OR OB14 409F 17 PSI 350 PSI
STAINS / DYES
M ATERIAL REDUCTION GUN / TECHNOLOGY TIP / AIR CAP AIR PRESS. FLUID PRESS.
WoodSong II Reduce as needed to meet V iscosity TJR 1.2 10 PSI GRA V ITY
Wate r Borne Stain Bas e Reduce as needed to meet V iscosity CP-J100H 1.0 X 1090 8-10 PSI GRA V ITY
Reduce as needed to meet V iscosity CPR-G-W 1.0 X 1301 12-15 PSI GRA V ITY
Reduce as needed to meet V iscosity CA T-X 1.0 X 1411 12-15 PSI GRA V ITY
GLAZES
M ATERIAL REDUCTION GUN / TECHNOLOGY TIP / AIR CAP AIR PRESS. FLUID PRESS.
Wate r Borne Glaze Reduce as needed to meet V iscosity TJR-GLA ZE W/ P-CUP GLA ZE TIP 0 PSI 5-7 PSI
Reduce as needed to meet V iscosity TJR W/ PRES-CUP 1.4 10 PSI 5-7 PSI
Coating Atomization Technologies: 337 S. Arthur Ave. Louisville, CO 80027 Tel: 888.820.4498 Fax: 303.438.5708
www.spraycat.com
Set-Up Recommendations for
H2O-CPR
Available in gravity and pressure kits
Stainless Steel Fluid Passages
Patented 12 point atomization
Includes 3 needle & nozzle sizes
Includes HVLP and pressure reduced air caps
Available with 3M PPS pressure cup system
Pump Designation:
Bobcat Outfits H2O-OB14-C5-12-XXX-F
H2O-OB14-W5-12-XXX-F
Cougar Outfits H2O-OC14-C5-12-XXX-F
H2O-OC14-W5-12-XXX-F
Coating Atomization Technologies: 337 S. Arthur Ave. Louisville, CO 80027 Tel: 888.820.4498 Fax: 303.438.5708
www.spraycat.com
Cups and Tanks
1qt PPS Mini PPS 1qt PPS 1qt Pressure Cup w/ Reg
Cup System Pressure Cup Pressure Cup for HVLP Guns
2 Quart Outfits
Available with 5’ Air and Fluid Hoses
Tank Outfits
Available with 25’ Air and Fluid Hoses
Coating Atomization Technologies: 337 S. Arthur Ave. Louisville, CO 80027 Tel: 888.820.4498 Fax: 303.438.5708
www.spraycat.com