Professional Documents
Culture Documents
Solbin A Tds 3.2014rs
Solbin A Tds 3.2014rs
Solbin A Tds 3.2014rs
Nissin Chemical Industry Co., Ltd. Technical data sheet for SOLBIN A 3,Mar, 2014 1
SOLBIN A
Compatibility with SOLBIN A/ Other are sometimes used. Heating to around 50°C and sufficient
agitation are required to speed up dissolving.
Modifying resins 9/1 4/1 1/1 1/4
Alkyd Beckosol *1
1307-60-EL Ο Ο Ο Ο In order to provide proper flexibility, resilience and
1334-EL Ο Ο Ο X adhesiveness to film, 5-20 PHR of plasticizer are added. The
1323-60-EL Ο Ο Ο Ο kind and amount of plasticizer to be added can be
Styrene Styresol*1 4250 ∆ ∆ X X determined in the same manner as in the method of
-Alkyd 4400 Ο Ο X X blending polyvinyl chloride resins.
*1
Melamine Beckamine J-138 Ο Ο Ο Ο Most common pigments can be employed.
Superbeckamine*1
Stabilizers against heat and light are used, as with
TD-126 Ο Ο Ο X
conventional polyvinyl chloride resins. The addition of
J-820 Ο Ο Ο Ο
about 0.2% propylene oxide, in this case, can prevent the
G-821 Ο Ο Ο Ο
corrosion of containers and change in paints in storage.
Epoxy Epicote*2 828 Ο Ο Ο Ο
1001 Ο Ο ∆ X Any method of coating, including spraying, roll coating and
Urethane Nippolan*3 2300 series Ο Ο Ο Ο others, may be used. For roll coating, a solution of 200-400
3000 series Ο Ο Ο Ο seconds in Ford Cup No.4 viscosity should be used. For
Coronate*3 L Ο Ο Ο Spray applications a solution of 60-80 seconds Ford Cup
No.4 viscosity should be used at an air pressure of 98-100psi
Coating/film Notes: Ο-Transparent ; ∆ - Slightly clouded;
and a liquid pressure of 20-30psi.
X– Whitish or knurled. *1—DIC Crop.; *2—Japan Epoxy
Resins Co. Ltd.; *3 Nippon Polyurethane Industry Co., Ltd. Solbin A does not usually provide satisfactory adhesion
Applications through air drying alone. The following chart provides the
Printing Ink - Solbin A is used for coating and gravure degree of adhesion to various surfaces by air drying:
printing ink, adding gloss to create a better decorative
Excellent Polyvinyl chloride resin, Acryl resin
effect.
Metal Container Paints - Solbin A is used for lining food Good Concrete, Plaster
and beverage containers. Its anti-corrosiveness makes it Fair Chlorinated rubber
an excellent choice for use in container lining, including
applications for medicines and cosmetics. It produces a Metal, Wood, Cloth, Phenol resin, Alkyd resin,
tough film that makes it ideal for coating steel and Inferior Butyral resin, celluloid, Shellac, Dried water-
galvanized tin plates that will be fabricated later.
Paper and Textile Coating - Solbin A provides a Short-time baking at 170-190°C will significantly improve
waterproof protection, adding gloss for a better adhesion and surface gloss. When primers are used,
decorative effect. sufficient adhesion may be obtained without baking.
Magnetic Paint - Due to Solbin A’s excellent dispersing Please contact: Shin-Etsu MicroSi
ability for inorganic pigments such as magnetic powder, 1.888.642.7674 www.microsi.com
it is used as a binder and dispersing agent for magnetic
Nissin Chemical Industry Co., Ltd.
paint used to produce magnetized cards and tapes.
+81.3.3295.3931 www.nissin-chem.co.jp
How to Use
Caution
To ensure Solbin A quickly goes into solution it is Follow the precautions in the material safety data
recommended to disperse it into a weaker solvent such sheet and technical references.
as toluene and xylene then blend with the stronger
SOLBIN is for industrial use only.
solvent.
The data in the this document does not include all
Solbin A is usually dissolved in a combination of both
specifications. Purchasers must conduct tests of their
ketone (e.g. MEK and MIBK) and aromatic hydrocarbon
own before putting the product to practical use to
(e.g. toluene and xylene) solvents in equal proportions,
verify its compliance, with their intentions for its
to produce a solution of 15% - 20% concentration by
employment.
weight. For coatings on a porous substance, (paper or
We give no guarantee that the uses presented in this
cloth), faster drying solvents such as MEK and acetone
document do not come in conflict with any patents.
are recommended.
For the purpose of enhancement of performance or
For Spray coating, MIBK is used. For baking on metals, change of specifications, the contents in this document
ketone with a high boiling point such cyclohexanone is are subject to revision without notice.
used. For roll coatings, cyclohexanone or isophorone Permission is required to reprint our data.
Nissin Chemical Industry Co., Ltd. Technical data sheet for SOLBIN A 3,Mar, 2014 2