Professional Documents
Culture Documents
IR-Primeroyal-PP Datasheet LowRes
IR-Primeroyal-PP Datasheet LowRes
IR-Primeroyal-PP Datasheet LowRes
Metering Pump
Model PP
Applications
• Oil and Gas
–– Upstream – Injection of methanol at pressures of 1,034 bar (15,000 psi) and more at the wellhead for onshore and
offshore wells
–– Midstream – Injection of corrosion inhibitors for produced oil and gas integrity during transportation
–– Downstream – Injection of chemicals for separation and treatment of refined products
–– Produced water treatment – Injection of sodium hypochlorite, biocides, scale inhibitors, oxygen reducing agent, etc.
• Chemical and Petrochemical Processing
–– Dosing catalysts for polymerization of polyethylene
• Power Generation
–– High-pressure boiler feed water treatment
© 2016 Milton Roy, LLC. All Rights Reserved. 1 an Accudyne Industries brand
an Accudyne Industries brand
General Specifications
Accuracy ± 1% over a range of 10 to 100% nominal flowrate
Frequencies at 50 Hz 1,440 rpm 48, 73, 93, 117, 146, and 175 spm
Frequencies at 60 Hz 1,725 rpm 58, 88, 112, 140, and 175 spm
Design Specifications
Model PP with Packed Plunger Liquid End Type UT or N*
Freq. Freq.
(spm) (spm)
Pressure Max. Pressure Max.
Flow rate 50 Hz Motor (kW) Flow rate 60 Hz Motor (HP)
Motor Motor
Speed Speed Connections
(rpm) (rpm) ball valves
7.5 11 15 18.5 10 15 20 25
Pres. Pres.
10 bar U V W X 145 psi U V W X
Max. 1,440 Max. 1,725
l/h bar gph psi
N Liquid End - Ø 32 mm - Swept Volume: 59.38 cm3 N Liquid End - Ø 1.26 in - Swept Volume: 3.62 in3 1”
166 156 306 48 52.6 49.5 4,438 58
253 238 306 73 80.2 75.5 4,438 88
(Ø 25 mm - LS)
323 303 253 306 93 102.4 96.1 3,669 4,438 112
(Ø 0.98 in. - LS )
406 381 200 299 306 117 128.7 102.8 2,901 4,337 4,438 140
507 476 160 239 306 1461 Not applicable with a 60 Hz motor
UT Liquid End - Ø 63.5 mm - Swept Volume: 237.52 cm3 UT Liquid End - Ø 2.5 in - Swept Volume: 14.49 in3 1” 1/2
656 638 76 48 208.0 202.3 1,102 58
998 971 76 73 316.4 307.8 1,102 88
(Ø 40 mm - NS)
1,272 1,238 63 76 93 403.2 392.5 914 1,102 112
(Ø 1.575 in. - NS)
1,600 1,557 50 75 76 117 507.2 493.6 725 1,088 1,102 140
1,997 1,944 39 59 76 146 1
Not applicable with a 60 Hz motor
* This chart demonstrates the minimum and maximum flow rate and pressure of the pump. For other specifications, please consult your local representative.
*For “methanol” applications, please consult us.
*To have an ATEX certification in zone 1, please add probes = CONSULT
1
Do not use with 60 Hz motor
LS - Hardened valves - single valve
NS - Single valves
Design Specifications
Model PP with Packed Plunger Liquid End Type UT*
Freq. Freq.
Pressure Max. (spm) Pressure Max. (spm)
Design Specifications
Model PP with Metallic Diaphragm Liquid End with HPD Type H*
Freq. Freq.
Pressure Max. (spm) Pressure Max. (spm)
601 461 136 202 278 300 1751 Not applicable with a 60 Hz motor (Ø 25 mm - NS) (Ø 0.98” - NS)
Ø 63 mm - Swept Volume: 233.79 cm3 - Diaphragm: 268 mm Ø 2.48 in - Swept Volume: 14.26 in3 - Diaphragm: 10.55 in. 2”
639 603 80 48 202.6 191.2 1,160 58
972 918 80 73 308.1 291.0 1,160 88
1,239 1,170 66 80 93 392.8 370.9 957 1,160 112 (Ø 50 mm - NS)
1,559 1,472 52 78 80 117 494.2 466.6 754 1,131 1,160 140 (Ø 2 in. - NS)
Design Specifications
Model PP with Metallic Diaphragm Liquid End with HPD Type H*
Freq. Freq.
Pressure Max. (spm) Pressure Max. (spm)
Dimensions
Diaphragm liquid end simplex configuration
Simplex 1,984 900 2,425 1,100 65 x 59 x 55 (*) 1,650 x 1,500 x 1,400 (*)
Duplex 3,969 1,800 4,531 2,055 88.65 x 59 x 55 2,250 x 1,500 x 1,400
Triplex 5,292 2,400 5,953 2,700 116.23 x 59 x 55 2,950 x 1,500 x 1,400
PPF and PRF series (fixed stroke)
Literature #59196.01
© 2016 Milton Roy, LLC. All Rights Reserved. 5