The document provides recommended component hours and repair/inspection hours for a D10T dozer under high, medium, and low application severity. It defines the three levels of application severity and lists the base hourly rate for repairs as $46.17, assuming a 45,000 hour machine life.
The document provides recommended component hours and repair/inspection hours for a D10T dozer under high, medium, and low application severity. It defines the three levels of application severity and lists the base hourly rate for repairs as $46.17, assuming a 45,000 hour machine life.
The document provides recommended component hours and repair/inspection hours for a D10T dozer under high, medium, and low application severity. It defines the three levels of application severity and lists the base hourly rate for repairs as $46.17, assuming a 45,000 hour machine life.
Assumes 80/20 No Travel Time & Mileage $91/hr shop - $100/hr field Base configuration machine (no ripper)(GET and hardware not included) No fluids Term 45,000hrs
Definitions of Application Severity
(Performance Handbook Edition 36, Section-Owning and Operating Costs)
HIGH MEDIUM LOW
Heavy rock ripping. Production dozing in clays, Pulling scrapers, most Push loading and dozing in sands, gravels. agricultural drawbar, hard rock. Push loading scrapers, stockpile, & coal pile Working on rock surfaces. borrow pit ripping, most land applications. Continuous high impact clearing applications. No Impact. conditions. Medium impact conditions. Intermittent full throttle Production landfill work. operation.