Professional Documents
Culture Documents
9681 Series: High Pressure Filters
9681 Series: High Pressure Filters
9681 Series: High Pressure Filters
9681 Series
High Pressure Filters
Coralon® lube and hydraulic oil filters deliver consistent, high level
fluid system protection across all applications, regardless of severity.
Coralon filters feature BetaX(C) >1000 filter efficiency, low pressure
drop and long service life.
Features
• Flows to 565 lpm (150 US gpm)
• Pressures to 420 bar (6100 psi)
• Port size: 1¼” and 1½”
E20
10
A24
0.5 B24
D24
5 K24
24 PORTS
0 0
0 20 40 60 80 100 120 140 160
Flow (gpm)
Ordering Information
For new installations, select one complete
part number from each section below
Part Number (Description) Breakdown 861C Electrical switch (SPDT) with Hirschmann connector
HH = housing with nitrile seals 771B Electrical switch (SPDT) with 3-pin
HZ = housing with fluorocarbon seals
9681 = 9681 Series housing Table 4: Differential Pressure Indicator Material
C20 = 1¼” BSP ISO 228 threads Code Description
C24 = 1½” BSP ISO 228 threads Omit If Brass Indicator is selected in Table 3
G20 = 1¼” ISO 6162 split flange ports (400 bar/5800 psi max pressure) SS If Stainless Steel Indicator is selected in Table 3
K20 = 1¼” Top Manifold Mount (recommended for high pressure applications with pressure
> 200 bar (3000 psi)
S20 = 1¼” Side Manifold Mount
S = 8” nominal length
T = 13” nominal length
U = 16” nominal length
W = Non-bypass
1 = 1 indicator warning device port
Table 1: Table 2:
Filter Performance Ratings Length Options
Code ßx(c) ≥1000 per ISO 16889 Code Description
CP 5 8 8” nominal length
CT 15 13 13” nominal length
16 16” nominal length
Dimensional Drawings
Dimensions in mm (inches)
63 mm
PORT CODE
(2.48 in)
The equipment has been assessed in
STAMP accordance with the guidelines laid down
44.5 mm in The European Pressure Directive 97/23/
(17.52 in) EC and has been classified within Sound
Engineering Practice S.E.P. Suitable for
use with Group 1 and 2 fluids only. Consult
32 mm Sales for other fluid gas group suitability.
(1.26 in) MIN.
88.9 mm
(3.5 in)
INLET
121 mm
(4.76 in) 101.6 mm
(4.0 in)
63.5 mm Ø 127 mm
(2.5 in) (5.0 in)
LENGTH
‘L’
Ø 103 mm
(4.05 in)
Portsmouth - UK Because of technological developments related to the products, systems, and/or services described herein, the data
+44 (0)23 9233 8000 telephone and procedures are subject to change without notice. Please consult your Pall representative or visit www.pall.com
to verify that this information remains valid.
+44 (0)23 9233 8811 fax
www.pall.com/contact © Copyright 2019, Pall Corporation. Pall, , and Coralon are trademarks of Pall Corporation.
® Indicates a trademark registered in the USA. Better Lives. Better Planet. and Filtration. Separation. Solution.SM
are service marks of Pall Corporation.