Professional Documents
Culture Documents
10 - 03 - 2021 - Me - R2016 / Chbcgs / Fe / Sem-1 / Mddlo1011 / Mech / Process Equipment Design/Mcq
10 - 03 - 2021 - Me - R2016 / Chbcgs / Fe / Sem-1 / Mddlo1011 / Mech / Process Equipment Design/Mcq
10 - 03 - 2021 - Me - R2016 / Chbcgs / Fe / Sem-1 / Mddlo1011 / Mech / Process Equipment Design/Mcq
10_03_2021_ME_R2016 / ChBCGS / FE /
SEM-1 / MDDLO1011 / MECH / PROCESS
EQUIPMENT DESIGN/MCQ
* Required
Q1. The thickness of thin cylinder is determined on the basis of, * 2 points
Radial stress
Longitudinal stress
Circumferential stress
API
TEMA
IS 2825
https://docs.google.com/forms/d/e/1FAIpQLSd9EqNfN-CFI8uz2HrSmicVvR1ZcHkAGfwLA203F9aX6lFhEA/formResponse 1/8
3/10/2021 10_03_2021_ME_R2016 / ChBCGS / FE / SEM-1 / MDDLO1011 / MECH / PROCESS EQUIPMENT DESIGN/MCQ
Q3. Type of head consists of profile generated by two different circles 2 points
having crown radius and knuckle radius *
Elliptical head
Spherical head
Flat head
Torispherical head
Leg
Skirt
Saddle
Lug
Material selection
Brazing
Welding
https://docs.google.com/forms/d/e/1FAIpQLSd9EqNfN-CFI8uz2HrSmicVvR1ZcHkAGfwLA203F9aX6lFhEA/formResponse 2/8
3/10/2021 10_03_2021_ME_R2016 / ChBCGS / FE / SEM-1 / MDDLO1011 / MECH / PROCESS EQUIPMENT DESIGN/MCQ
30
90
60
45
test water
operating fluid
Skirt
Type of joint
Type of material
https://docs.google.com/forms/d/e/1FAIpQLSd9EqNfN-CFI8uz2HrSmicVvR1ZcHkAGfwLA203F9aX6lFhEA/formResponse 3/8
3/10/2021 10_03_2021_ME_R2016 / ChBCGS / FE / SEM-1 / MDDLO1011 / MECH / PROCESS EQUIPMENT DESIGN/MCQ
Q10 Maximum joint efficiency factor for a full penetration butt weld while 2 points
designing as per internal pressure can be: *
0.45
0.5
0.6
Q11. In ASME section VIII ,the term U in UG,UB ,UW,UHA stands for * 2 points
Unfired
United
Undesirable
Uniform
https://docs.google.com/forms/d/e/1FAIpQLSd9EqNfN-CFI8uz2HrSmicVvR1ZcHkAGfwLA203F9aX6lFhEA/formResponse 4/8
3/10/2021 10_03_2021_ME_R2016 / ChBCGS / FE / SEM-1 / MDDLO1011 / MECH / PROCESS EQUIPMENT DESIGN/MCQ
Q12. While calculating as per external pressure, shell thickness is not a 2 points
function of: *
type of joint
https://docs.google.com/forms/d/e/1FAIpQLSd9EqNfN-CFI8uz2HrSmicVvR1ZcHkAGfwLA203F9aX6lFhEA/formResponse 5/8
3/10/2021 10_03_2021_ME_R2016 / ChBCGS / FE / SEM-1 / MDDLO1011 / MECH / PROCESS EQUIPMENT DESIGN/MCQ
Q15. In agitator, to prevent vortexing and rotation of the liquid mass 2 points
Impeller
Baffle
Draft tube
Motor
Q16. Basically for high speed agitator, type of impeller used is_________ * 2 points
Propeller
Turbines
Paddle
Q17. Tank used to store liquids, consisting of a cone- or dome-shaped roof 2 points
that is permanently affixed to a cylindrical shell. *
Fixed-roof tanks.
https://docs.google.com/forms/d/e/1FAIpQLSd9EqNfN-CFI8uz2HrSmicVvR1ZcHkAGfwLA203F9aX6lFhEA/formResponse 6/8
3/10/2021 10_03_2021_ME_R2016 / ChBCGS / FE / SEM-1 / MDDLO1011 / MECH / PROCESS EQUIPMENT DESIGN/MCQ
Q18. An open-topped cylindrical steel shell equipped with a roof that 2 points
floats on the surface of the stored liquid, rising and falling with the liquid
level. *
Fixed-roof tanks.
Q19. In TEMA heat exchanger, minimum centre to centre distance 2 points
between tubes is *
TEMA class A
TEMA class B
TEMA class C
TEMA class R
Back Submit
https://docs.google.com/forms/d/e/1FAIpQLSd9EqNfN-CFI8uz2HrSmicVvR1ZcHkAGfwLA203F9aX6lFhEA/formResponse 7/8
3/10/2021 10_03_2021_ME_R2016 / ChBCGS / FE / SEM-1 / MDDLO1011 / MECH / PROCESS EQUIPMENT DESIGN/MCQ
This form was created inside of Finolex Academy of Management and Technology. Report Abuse
Forms
https://docs.google.com/forms/d/e/1FAIpQLSd9EqNfN-CFI8uz2HrSmicVvR1ZcHkAGfwLA203F9aX6lFhEA/formResponse 8/8