Professional Documents
Culture Documents
M - L M RTO: Ulti Ayer Edia For S
M - L M RTO: Ulti Ayer Edia For S
PERFORMANCE.
Proven heat-recovery
technology which makes
your RTO perform in
ways you’ve never
imagined.
MULTI-LAYER
MEDIA FOR RTOS
® LANTEC PRODUCTS
MLM WWW.LANTECP.COM
MLM® Works Wonders for RTOs
MLM® from Lantec Products provides the most Original equipment costs are reduced with
comprehensive solution for efficient operation of MLM® designs. Operating at a high gas velocity
regenerative thermal oxidizers (RTOs). MLM® is allows an RTO to be designed with a greatly
available in various configurations allowing units reduced overall footprint. Designing for lower bed
to be designed specifically to maximize thermal depths and pressure drops enables the use of
efficiency or resistance to plugging, or minimize smaller blower motors with less costly starters and
bed height or pressure drop. Available versions controls, and less expensive control box and
include MLM-125, MLM-160, MLM160-6, installation wiring.
MLM-180, MLM-200, and MLM-S.
Cost-cutting retrofits with MLM® can raise ther-
MLM's parallel-plate structure packs more mal efficiency to reduce RTO fuel consumption,
ceramic material into each cubic foot (over 3 times lower the pressure drop to cut fan power use, or
more surface area than saddles) with less resist- both. Operating cost savings often result in a pay-
ance to air flow. The result is a unique combina- back period of less than 6 months.
tion of high heat capacity, rapid heat transfer, low
pressure drop, and great resistance to plugging by Capacity-boosting retrofits with MLM® allow
particulates. When 1'' saddles are replaced with RTOs to operate at gas velocities of 400 scfm/ft2
MLM-S, bed depths can be reduced by more than or higher, with excellent heat recovery and moder-
50%. ate pressure drop. What would otherwise require a
second RTO can be accomplished just by replac-
ing media and upgrading the fan.
WWW.LANTECP.COM
MLM P ERFORMANCE D ATA:
WWW.LANTECP.COM
Physical Properties of MLM®
Physical Properties (metric units) MLM-125 MLM-160 MLM-160-6 MLM-180 MLM-200 MLM-S
Standard Module Size (mm) 305 x 305 305 x 305 305 x 152 305 x 305 305 x 305 305 x 305
x 102 x 102 x 152 x 102 x 102 x 102
Heat Capacity (kJ/m3-°C) 670 810 810 940 1070 1070
Weight (kg/m3) 640 840 840 950 1060 1060
Void Fraction (%) 72 64 64 59 54 53
Specific gravity of ceramic 2.25 – 2.35 2.25 – 2.35 2.25 – 2.35 2.25 – 2.35 2.25 – 2.35 2.25 – 2.35
Water absorption (ASTM C373) < 0.5 % < 0.5 % < 0.5 % < 0.5 % < 0.5 % < 0.5 %
Acid resist. strength wt. loss (ASTM C279) < 4 % <4% <4% <4% <4% <4%
Maximum working temp 1290°C 1290 °C 1290°C 1290°C 1290°C 1290°C
Cold crushing strength (kg/cm2) 4,210 5,380 5,380 6,120 7,340 7,340
Also Available:
Low cost ceramic saddles
®
MLM
WWW.LANTECP.COM
Headquarters: 5302 Derry Ave, Unit E. Agoura Hills, CA 91301, 818.707.2285
Sales: 106 Access Road, Norwood, MA 02062, 781.769.1901