Professional Documents
Culture Documents
BFMII Storage
BFMII Storage
Section 4 - Maintenance
SCHEDULED MAINTENANCE
MISCELLANEOUS
STORING THE MOBILE BOAT REMOVING THE MOBILE BOAT
HOIST HOIST FROM STORAGE
When the mobile boat hoist is to remain idle for 1. Completely lubricate the mobile boat hoist.
an extended period of time, protective procedures
must be taken to prevent corrosion damage to 2. Install the batteries. Make sure the batteries
components. are completely charged.
1. INSPECTION AND REPAIR. Completely 3. Remove protective covers from the tires.
inspect and test the mobile boat hoist. Make Check the tire air pressures.
all necessary repairs and adjustments so the
mobile boat hoist can be used immediately 'UDLQWKHIXHODQGK\GUDXOLFWDQNV¿OOWRWKH
at the end of the storage period. correct level with new fuel and hydraulic oil.
2. LUBRICATION. Lubricate the mobile boat 5. Read the engine manual for instructions on
hoist as in normal maintenance. removing the engine from storage.
3. PARKING. Clean the complete mobile 6. Completely clean the mobile boat hoist.
boat hoist. Park the mobile boat hoist on a Remove all rust preventive applied during
hard, dry, and level surface that is free from storage, as well as the preservation grease
grease and oil. Oil and grease will cause tire from polished surfaces. Inspect the unit for
deterioration. Set the parking brake. rust. Remove all rust and paint these surfaces.
NOTE
4. BATTERY. Remove the battery from the Check the IQAN Real-time clock to ensure it is
mobile boat hoist. Put the battery in a cool, set correctly when removing the mobile boat hoist
dry place where it can be inspected and from storage or when the unit has been without
charged at least every 30 days. The battery power for 7 days. To check, access the main
can be put on a trickle charger to keep it at screen on the IQAN display, press Menu, select
full charge. Preferences (clipboard icon) and press the Screen
5. RUST PREVENTION. Remove rust from the Menu button. On the IQAN Main page, press
mobile boat hoist and apply paint to these Menu, select Preferences, and select Date/Time
surfaces to inhibit further rust. Apply a good to check/reset the clock.
rust preventive to all exposed surfaces.