Professional Documents
Culture Documents
Naturist Antibakteriyel Jel - MSDS - ENG
Naturist Antibakteriyel Jel - MSDS - ENG
Pictogram
Signal Word DANGER
Hazard statement(s)
H225 Highly flammable liquid and vapour
Precautionary statement(s)
3. HAZARDS IDENTIFICATION
For the full text of the H-Statements mentioned in this Section, see Section 16.
5. FIRE-FIGHTING MEASURES
5.1 Extinguishing media
Suitable extinguishing media
Water spray jet, Foam, Carbon dioxide (CO2), Dry powder
Unsuitable extinguishing media
No data available
5.2 Special hazards arising from the substance or mixture
Carbon monoxides
5.3 Advice for firefighters
Wear self-contained breathing apparatus for firefighting if necessary.
Protective equipment and precautions for firefighters
Wear self-contained breathing apparatus for firefighting if necessary.
Further information
Keep containers and surroundings cool with water spray. Do not use a solid water stream as it may
scatter and spread fire. Collect contaminated fire extinguishing water separately. This must not be
discharged into drains.
Page No: 4/11
Printed on: 11.03.2020
Dated: 11.03.2020
Revision nr. :-
Methods and materials for containment : Soak up with inert absorbent material (e.g. sand, silica
and cleaning up gel, acid binder, universal binder, sawdust).
Flush with water.
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Full contact
Material: Nitrile rubber
Minimum layer thickness: 0.4 mm
Break through time: 480 min
Material tested:Camatril® (KCL 730 / Aldrich Z677442, Size M)
Splash contact
Material: Nitrile rubber
Minimum layer thickness: 0.2 mm
Break through time: 49 min
Material tested:Dermatril® P (KCL 743 / Aldrich Z677388, Size M)
data source: KCL GmbH, D-36124 Eichenzell, phone +49 (0)6659 87300, e-mail sales@kcl.de,
test method: EN374
If used in solution, or mixed with other substances, and under conditions which differ from EN 374,
contact the supplier of the CE approved gloves. This recommendation is advisory only and must
be evaluated by an industria situation of anticipated use by our customers. It should not be
construed as offering an approval for any specific use scenario.
Body Protection
Impervious clothing, The type of protective equipment must be selected according to the
concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use (US) or type ABEK (EN
14387) respirator cartridges as a backup to enginee protection, use a full-face supplied air
respirator. Use respirators and components tested and approved under appropriate government
Page No: 6/11
Printed on: 11.03.2020
Dated: 11.03.2020
Revision nr. :-
No data available
Specific target organ toxicity - repeated exposure
No data available
Aspiration hazard
No data available
Swallowed: Ingestion of large quantities may cause irritation to the digestive tract, nausea, vomiting or
diarrhea
Eye Contact: Causes serious eye damage
Skin: Repeated exposure may cause drying, redness, itching and irritation.
Inhaled: Inhalation of vapour or mist may cause irritation of the nose, throat and respiratory system.
14.1. UN number
UN Number (ADR / RID / ADN) : 1993
Un Number (IMDG) : 1993
Un Number (ICAO) : 1993
14.2. UN proper shipping name
15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture
Statutory Instruments
The Chemicals (Hazard Information and Packaging for Supply) Regulations 2009 (S.I 2009 No. 716).
Page No: 10/11
Printed on: 11.03.2020
Dated: 11.03.2020
Revision nr. :-
Guidance Notes
Workplace Exposure Limits EH40.
CHIP for everyone HSG(108).
EU Legislation
Regulation (EU) No 2015/830.
information is required to ensure that an appropriate risk assessment can be made, the user should
contact İYON CHEM KİMYA TEKNOLOJİ San. Ve Ltd.Şti. and Ask for Technical Manager. Safety
Data Sheets are updated regularly. Please ensure that you have a current copy. † Trademark used under
licence.