Professional Documents
Culture Documents
Aarti - Repeatative Failure Issue in QTI Make Non Sparking Tools - Redacted
Aarti - Repeatative Failure Issue in QTI Make Non Sparking Tools - Redacted
Please find Photo of Non Sparking Tools which were broken in CLB Plant during Normal
Plant Usage.
Quality of All QTI make Supplier's Non Sparking Tools are very Poor & their cost is
almost five times then Normal Aluminium Bronze Non Sparking Tools. We are facing
frequent failure issue in QTI make Non Sparking Tools. Inspite of having Copper Titanium
MOC, Why these kind of repetitive failure found in spanners??
We want one to one replacement of all Broken QTI make Non sparking tools or else we
will not take QTI make Non Sparking Tools as too many manufactures are in market who
will supply Non Sparking Tools.
We want replacement of all broken Fix & Ring spanners as we are facing this problem
since last three months & few of the spanners were broken in a single use only so this is a
manufacturing defect only.
--
Regards,
Parin Shah
+91 9998982232/7069009962
Assistant Manager-Mechanical
parin.shah@aarti-industries.com
Plot No: 758/1-2-3, GIDC, PB No: 23, Jhagadia-393110, Dist- Bharuch |
www.aarti-industries.com
DISCLAIMER:
This message contains Aarti Industries Ltd's confidential information and is intended
only for the individual named. If you are not the named addressee, you are hereby
notified that disclosing, copying, distributing or taking any action in reliance on the
contents of this e-mail is strictly prohibited. Please notify the sender immediately by e-
mail if you have received this e-mail by mistake please delete this message from your