Professional Documents
Culture Documents
Bell 429 Throttle Setup
Bell 429 Throttle Setup
Bell 429 Throttle Setup
METHOD ONE :-
No throttle sliders, using keys F1 and F2.
Open Joystick & Equipment.
Open 412 plugin and ensure Enable hardware throttle(s) not ticked.
Now you can use F1 and F2 too control both throttles or click on up/down also
arrows on centre of collective control. You can program any toggle switch
to :-
sim/engines/throttle_up
sim/engines/throttle_down
METHOD TWO :-
Single slider as throttle.
When changing setup a re-start of X-Plane is required before setting take effect.
METHOD THREE :-
Two sliders as throttle 1 and 2.
When set as two separate throttles you need to be able to increase both throttles together or
you will have problems matching torques and end up chasing needles.