Professional Documents
Culture Documents
Gr-1450exhyd S G
Gr-1450exhyd S G
φ570
OPTIONAL WEIGHT 11.1t
3,500 4,165 4,860
2,990
5,500
7,300
8,200
4,520 4,505
4,6
00
3,785
17.4º
16.2º
12.6º
11.9º
GENERAL DIMENSIONS
CRANE SPECIFICATIONS
SLEWING 15º tilt, Left side, 1 man type, steel construction with sliding door
Hydraulic axial piston motor driven through planetary slewing access and safety glass windows opening at side. Door window is
speed reducer. Continuous 360º full circle slewing on ball bearing powered control. Windshield glass window and roof glass window
turn table at 1.3min-1 {rpm}. Equipped with manually are shatter-resistant. Tilt-telescoping steering wheel. Adjustable
locked/released slewing brake. A 360º positive swing lock control lever stands for swing, boom elevating, boom telescoping,
manually engaged in cab. Twin slewing system: Free slewing or auxiliary winch and main winch. Control lever stands can change
lock slewing controlled by selector switch in cab. neutral positions and tilt for easy access to cab. 3 way adjustable
Slewing speed ................. 1.3 min-1 {rpm} operator's seat with high back, headrest and armrest. Engine
throttle knob. Foot operated controls: boom elevating boom
COUNTERWEIGHT telescoping, service brake and engine throttle. Hot water cab
Standard weight ................... 18,200 kg heater and air conditioning.
Extra weight right ................. 5,550 kg
Extra weight left ................... 5,550 kg Dash-mounted engine start/stop, monitor lamps, cigarette
lighter, drive selector switch, parking brake switch, steering mode
WINCH select switch, power window switch, pump engaged/ disengaged
MAIN WINCH switch, swing brake switch, telescoping/auxiliary winch select
Variable speed type with grooved drum driven by hydraulic axial switch, outrigger controls, free swing / lock swing selector switch,
piston motor through speed reducer. Power load lowering and eco mode switch, high speed winch (main/aux) switch and
raising. Equipped with automatic brake (neutral brake) and ashtray.
counterbalance valve. Controlled independently of auxiliary winch.
Equipped with cable follower and drum rotation indicator. Instruments - Torque converter oil temperature, engine water
temperature, air pressure, fuel, speedometer, tachometer, hour
MAIN DRUM meter and odometer / tripmeter. Hydraulic oil pressure is
Root diameter x wide .................................... 0.382 m x 0.742 m monitored and displayed on the AML-C display panel.
Wire rope diameter x length ............................... 19 mm x 320 m
Drum capacity ..................................................... 394 m, 7 layers
Maximum single line pull (1st layer)................ 97.0 kN (9,900 kgf)
Maximum permissible linepull wire strength...... 70.6 kN (7,200 kgf)
-2 -
SPEC. SHEET NO. GR-1450E-3-00102/EX-02
CRANE SPECIFICATIONS
TADANO AUTOMATIC MOMENT LIMITER
(AML-C) including: TADANO AML-C monitors outrigger extended length and
• Control lever lockout function with audible and visual automatically programs the corresponding "RATED LIFTING
pre-warning CAPACITIES" table.
• Boom position indicator
• Outrigger state indicator Operator's right hand console includes transmission gear selector
• Boom angle / boom length / jib offset angle / jib length / load and sight level bubble. Upper console includes working light
radius / rated lifting capacities / actual loads read out switch, roof washer and wiper switch emergency outrigger set up
• Ratio of actual load moment to rated load moment indication key switch, jib equipped/removed select switch, eco mode switch,
• Automatic speed reduction and slow stop function on boom high speed winch (main / aux) switch and Cab tilt switch. Slewing
elevation and slewing lock lever.
• Working condition register switch
• Load radius / boom angle / tip height / slewing range preset NOTE: Each crane motion speed is based on unladen conditions.
function
• External warning lamp
• Tare function
• Fuel consumption monitor
• Main winch / auxiliary winch select
• Drum rotation indicator (audible and visible type) main and
auxiliary winch
CARRIER SPECIFICATIONS
TYPE AXLE
Rear engine, left hand steering, driving axle 2-way 1st: Full floating type, steering and driving axle with planetary
selected type by manual switch, 6 x 2 1st drive, 6 x 4 1st and 3rd reduction and open differential.
drive. 2nd: Steering and not driving axle.
3rd: Full floating type, steering and driving axle with planetary
FRAME reduction and open differential.
High tensile steel, all welded mono-box construction.
STEERING
ENGINE Hydraulic power steering controlled by steering wheel. Four
Model MITSUBISHI 6M60-TL steering modes available: 2 wheel front, 4 wheel rear, 6 wheel
Type Direct injection diesel coordinated and 6 wheel crab.
No. of cylinders 6
Combustion 4 cycle, turbo charged and after cooled SUSPENSION
Bore x Stroke, mm. (in) 118 x 115 (4.646 x 4.528) 1st: Rigid mounted to frame.
Displacement, liters (cu. in) 7.54 (460) 2nd and 3rd: "Hydro-Pneumatic suspension cylinders" with
Air inlet heater 24 volt preheat levering adjustment and oscillation.
Air cleaner Dry type, replaceable element
Oil filter Full flow with replaceable element BRAKE SYSTEMS
Fuel filter Full flow with replaceable element Service: Air over hydraulic disc brakes on
Fuel tank, liters (gal.) 300 (79.2), right side of carrier all 6 wheels. Parking/Emergency: Spring applied-air released
Cooling Liquid pressurized, recirculating by-pass brake acting on input shaft of 1st and 3rd axle.
Radiator Fin and tube core, thermostat controlled Auxiliary: Electro- pneumatic operated exhaust brake.
Fan, mm (in.) Suction type, 6-blade, 600 (23.6) dia.
Starting 24 volt TIRES - 26.5R25☆☆ Air pressure: 650 kPa
Charging 24 volt system, negative ground
Battery 2-120 amp. Hour OUTRIGGERS
Compressor, air, l /min (CFM) 830 (29) at 2,600 rpm Hydraulically operated H-type outrigger.
Output, Max. kW (HP) Gross 200 (267) at 2,600 rpm Vertical jack cylinders equipped with integral holding valve. Each
Torque, Max. Nm (ft-lb) 785 (579) at 1,400 rpm outrigger beam and jack is controlled independently from cab.
Capacity, liters (gal.) Outrigger boxes are self-removable for ease of transportation.
Cooling water 13 (3.4) Outrigger jack floats are attached thus eliminating the need of
Lubrication 13–15 (3.4–4.0) manually attaching and detaching them. Controls and sight level
Fuel 300 (79.2) bubble located in superstructure cab. Four outrigger extension
lengths are provided with corresponding "RATED LIFTING
TRANSMISSION CAPACITIES" for crane duty in confined areas.
Electronically controlled full automatic transmission. Torque Min. Extension 2.99 m center to center
converter driving full powershift with driving axle selector. 5 Mid. Extension 5.50 m center to center
forward and 2 reverse speeds, constant mesh. Mid. Extension 7.30 m center to center
2 speeds - high range - 2 wheel drive; 4 wheel drive Max. Extension 8.20 m center to center
3 speeds - low range - 4 wheel drive Float size (Diameter) 0.57 m
TRAVEL SPEED
15 km/h with counterweight
4 km/h without counterweight
-3 -
SPEC. SHEET NO. GR-1450E-3-00102/EX-02
STANDARD EQUIPMENT
- Winch drum mirror - Complete highway light package
- Positive control - Towing hooks-Front and rear
- 15º tilt cab - Hook block tie down (front bumper)
- Tilt-telescoping steering wheel - Weighted hook storage compartment
- Full instrumentation package - Halogen head lamp
- Control pedals for boom elevating and boom telescoping - Self-removable outrigger boxes
- 2nd and 3rd steer centering light - Independently controlled outriggers
- Air cleaner dust indicator - Self-storing outrigger pads
- Aviation obstruction light - Water separator with filter (high filtration)
- Additional weight 11.1 t - Back-up alarm
- Removable boom system - Tool storage compartment
- Wind speed indicator - Tire inflation kit
- Emergency steering system - Engine over-run alarm
- Electronic crane monitoring system - Lifting eyes
- Rear view mirrors (right and left side) - Telematics (machine data logging and monitoring system) with
- Fenders HELLO-NET via internet (availability depends on countries)
- Air dryer - Eco mode system
- Over-unwinding prevention - Self-removable counterweight
OPTIONAL EQUIPMENT
- Search light - 100 ton - 8 sheaves with hook block and safety latch
- Insert jib - Additional sheaves (Used at lifting more than 100 t)
- Short jib - 45 ton - 3 sheaves with hook block and safety latch
HOISTING PERFORMANCE
LINE SPEEDS AND PULLS DRUM WIRE ROPE CAPACITIES
Main or auxiliary winch - 0.382 m drum Main and auxiliary drum grooved lagging
Wire
Line speeds1 Line pulls Available2 19 mm wire rope
Layer rope
Low High Low Rope per layer Total wire rope
layer
m/min kN (kgf) Meter
1st 77 108 97.0 (9,900) 1 44.8 44.8
2nd 84 117 88.3 (9,010) 2 48.6 93.4
3rd 91 126 81.1 (8,270) 3 52.5 145.9
4th 97 136 74.9 (7,640) 4 56.3 202.2
5th 104 145 69.5 (7,090) 5 60.1 262.3
6th 110 154 64.9 (6,620) 6 63.9 326.2
7th3 117 163 60.8 (6,210) 7 67.7 393.9
-4 -
SPEC. SHEET NO. GR-1450E-3-00102/EX-02
BOOM
20° 40 Approx.
5° °
2.6 m
85
80
75
61
.0m
Bo 70
om
+1
JIB
61
.0m 8.
0m 65
81.5° Bo
om JI
+1 B
70° 0.
3m 60
JI Approx.
60° B 3.3 m
55
61 50°
.0
m
5
0°
0
0 5 10 15 20 25 30 35 40 45 50 55 60 65
NOTE: Boom and jib geometry shown are for unloaded condition and
machine standing level on firm supporting surface.
Boom deflection and subsequent radius and boom angle change
must be accounted for when applying load to hook.
-5 -
SPEC. SHEET NO. GR-1450E-3-00102/EX-02
90 Approx.
2.6 m
85
61
.0-
m 80
Bo
om
+7
.0-
m
75
IN
81.5° SE
70°
RT
JIB 70 JIB
+1
8.0
-m
60° JIB 65
61.
0-m 53° 60
Boo Approx.
m 3.3 m
50°
55
45
40
SINGLE TOP
0.6 m
35
Approx.
30 2.3 m
25
20
15
10
0
0 5 10 15 20 25 30 35 40 45 50 55 60 65
LOAD RADIUS (m)
NOTE: Boom and jib geometry shown are for unloaded condition and
machine standing level on firm supporting surface.
Boom deflection and subsequent radius and boom angle change
must be accounted for when applying load to hook.
-6 -
SPEC. SHEET NO. GR-1450E-3-00102/EX-02
90 Approx.
61 2.6 m
.0-
m
Bo
om 85
+1
4.0
-m
81.5°
INS
ER
80
TJ
IB
70° +1
8.0
-m
75
JIB
60° 70 JIB
58°
55° 65
61.
0-m 60
Boo Approx.
m
50
45
40
SINGLE TOP
0.6 m
35
Approx.
30 2.3 m
25
20
15
10
0
0 5 10 15 20 25 30 35 40 45 50 55 60 65
LOAD RADIUS (m)
NOTE: Boom and jib geometry shown are for unloaded condition and
machine standing level on firm supporting surface.
Boom deflection and subsequent radius and boom angle change
must be accounted for when applying load to hook.
-7 -
SPEC. SHEET NO. GR-1450E-3-00102/EX-02
BOOM
Approx.
2.6 m
40
º
20º
70 JIB
61 65
81.5° .0-
m
Bo
om
70° +3
.6- 60 Approx.
m
JIB 3.3 m
60°
55
50° 50
45
40° LIFTING HEIGHT (m) SINGLE TOP
40
0.6 m
35°
35
Approx.
30 2.3 m
25
20
15
10
0
0 5 10 15 20 25 30 35 40 45 50 55 60 65
LOAD RADIUS (m)
NOTE: Boom and jib geometry shown are for unloaded condition and
machine standing level on firm supporting surface.
Boom deflection and subsequent radius and boom angle change
must be accounted for when applying load to hook.
-8 -
SPEC. SHEET NO. GR-1450E-3-00102/EX-02
NOTE: In this table, the thick line which divides strength area and stability area is not shown because the figure of this table is indicated the best performance
at the same boom length among the plural telescopic boom patterns.
- 9-
SPEC. SHEET NO. GR-1450E-3-00102/EX-02
COUNTERWEIGHT 29.3 t
ON OUTRIGGERS FULLY EXTENDED 8.2 m SPREAD
360º ROTATION
52.6-m Boom + 10.3-m Hydraulic offset jib 35.0-m Boom + 10.3-m Hydraulic offset jib
C 0º Tilt 20º Tilt 40º Tilt C 0º Tilt 20º Tilt 40º Tilt
R W R W R W R W R W R W
81.5 11.3 7.2 14.3 7.2 17.4 6.8 81.5 8.9 10.6 11.3 7.3
81 12.0 7.2 15.0 7.2 18.0 6.7 81 9.3 10.5 11.7 7.2
80 13.4 7.2 16.3 7.2 19.2 6.5 80 10.1 10.2 12.5 7.1
79 14.8 7.2 17.6 7.0 20.3 6.3 79 10.9 10.0 13.2 7.0
78 16.1 7.2 18.8 6.8 21.4 6.1 78 11.9 9.7 14.0 6.9
77 17.5 7.2 19.9 6.6 22.5 5.9 77 12.6 9.5 14.8 6.9
76 18.8 7.2 21.1 6.4 23.6 5.8 76 13.3 9.3 15.5 6.8
75 19.6 6.9 22.3 6.2 24.6 5.6 75 11.8 12.8 14.1 9.1 16.2 6.7
73 22.0 6.5 24.4 5.8 26.7 5.4 73 13.4 12.2 15.6 8.7 17.6 6.5
70 25.7 5.9 27.6 5.4 29.6 5.0 70 15.6 11.3 17.9 8.2 19.7 6.3
68 27.9 5.6 29.8 5.2 31.6 4.8 68 17.2 10.8 19.3 7.9 21.0 6.2
65 31.0 5.2 32.7 4.8 34.3 4.5 65 19.3 10.1 21.4 7.6 22.9 6.1
63 33.2 5.0 34.6 4.6 36.1 4.4 63 20.7 9.6 22.8 7.4 24.2 6.0
60 36.0 4.6 37.5 4.4 38.8 4.2 60 22.8 9.0 24.8 7.1 26.0 5.9
58 37.8 4.4 39.2 4.2 40.4 4.0 58 24.1 8.7 26.0 6.9 27.2 5.8
55 40.4 4.1 41.7 3.9 42.7 3.8 55 26.0 8.2 27.9 6.7 28.9 5.7
53 42.0 3.9 43.3 3.8 44.1 3.6 53 27.2 7.9 29.0 6.5 29.9 5.7
50 44.4 3.6 45.5 3.4 46.1 3.3 50 29.0 7.6 30.7 6.4 31.4 5.7
48 45.8 3.3 46.8 3.1 47.4 3.0 48 30.1 7.4 31.7 6.3 32.4 5.6
45 47.7 2.8 48.6 2.7 49.1 2.6 45 31.7 7.1 33.2 6.1 33.8 5.6
43 49.0 2.5 49.8 2.4 43 32.7 7.0 34.2 6.1
40 50.8 2.2 51.5 2.1 40 34.1 6.8 35.4 6.0
38 51.8 1.9 52.6 1.9 38 35.1 6.6 36.3 5.9
35 53.5 1.7 54.0 1.6 35 36.4 6.2 37.5 5.9
33 54.4 1.5 54.9 1.4 33 37.2 5.9 38.2 5.7
30 55.7 1.3 56.1 1.2 30 38.3 5.5 39.2 5.4
28 56.6 1.2 56.8 1.1 28 39.0 5.3 39.7 5.2
25 57.7 1.0 57.8 1.0 25 39.9 5.0 40.4 4.9
23 58.3 0.9 23 40.4 4.9
20 59.1 0.8 20 41.1 4.7
G 1 G 2
COUNTERWEIGHT 29.3 t
ON OUTRIGGERS FULLY EXTENDED 8.2 m SPREAD
360º ROTATION
52.6-m Boom + 18.0-m Hydraulic offset jib 35.0-m Boom + 18.0-m Hydraulic offset jib
C 0º Tilt 20º Tilt 40º Tilt C 0º Tilt 20º Tilt 40º Tilt
R W R W R W R W R W R W
81.5 13.7 4.7 18.8 4.4 23.2 3.4 81.5 9.2 6.4 13.6 5.4 17.9 3.7
81 14.5 4.7 19.6 4.4 23.9 3.4 81 9.6 6.4 14.0 5.3 18.4 3.7
80 16.1 4.7 21.1 4.3 25.2 3.4 80 10.7 6.4 15.0 5.2 19.3 3.6
79 17.6 4.7 22.4 4.2 26.4 3.3 79 11.7 6.4 16.0 5.1 20.1 3.6
78 19.2 4.7 23.8 4.1 27.7 3.3 78 12.7 6.4 16.9 5.0 20.9 3.6
77 20.5 4.7 25.0 4.0 28.9 3.3 77 13.6 6.4 17.8 4.8 21.7 3.5
76 22.0 4.7 26.3 3.9 29.9 3.2 76 14.6 6.4 18.6 4.7 22.5 3.5
75 23.4 4.7 27.7 3.9 31.2 3.2 75 15.6 6.4 19.5 4.6 23.3 3.5
73 26.4 4.6 30.1 3.7 33.4 3.1 73 17.4 6.0 21.4 4.5 24.9 3.4
70 30.0 4.3 33.7 3.5 36.6 3.0 70 20.1 5.6 23.8 4.2 27.1 3.3
68 34.6 4.2 36.0 3.4 38.7 3.0 68 21.8 5.3 25.5 4.1 28.5 3.2
65 36.2 4.0 39.4 3.3 41.5 2.9 65 24.4 5.0 27.9 3.9 30.6 3.2
63 38.4 3.8 41.3 3.2 43.5 2.9 63 26.0 4.8 29.4 3.8 32.0 3.2
60 41.6 3.6 44.5 3.1 46.2 2.8 60 28.4 4.6 31.6 3.6 34.0 3.1
58 43.7 3.4 46.5 3.1 48.0 2.8 58 29.9 4.4 33.1 3.6 35.3 3.1
55 46.5 3.2 49.5 3.0 50.3 2.8 55 32.1 4.2 35.1 3.4 37.1 3.1
53 48.4 3.0 50.8 2.8 51.5 2.6 53 33.6 4.1 36.5 3.4 38.1 3.0
50 50.9 2.6 53.0 2.4 53.4 2.2 50 35.6 3.9 38.3 3.3 39.7 3.0
48 52.4 2.3 54.4 2.1 54.6 2.0 48 37.0 3.8 39.6 3.3 40.7 3.0
45 54.7 2.0 56.3 1.8 56.4 1.6 45 38.8 3.7 41.2 3.2 42.0 3.0
43 56.0 1.7 57.6 1.6 43 40.0 3.6 42.2 3.2
40 58.0 1.4 59.4 1.3 40 41.6 3.5 43.6 3.1
38 59.4 1.3 60.5 1.1 38 43.7 3.4 44.5 3.1
35 61.3 1.0 62.0 0.9 35 44.2 3.3 45.8 3.1
33 62.4 0.9 62.9 0.8 33 45.1 3.3 46.5 3.1
30 30 46.4 3.2 47.5 3.1
28 28 47.2 3.2 48.1 3.1
25 25 48.2 3.1 48.8 3.1
23 23 48.8 3.1
20 20 49.6 3.1
G 1 G 1
COUNTERWEIGHT 29.3 t
ON OUTRIGGERS FULLY EXTENDED 8.2 m SPREAD
360º ROTATION Insert jib: Option
52.6-m Boom + 7.0-m Insert jib + 18.0-m Hydraulic offset jib 35.0-m Boom + 7.0-m Insert jib + 18.0-m Hydraulic offset jib
C 5º Tilt 20º Tilt 40º Tilt C 5º Tilt 20º Tilt 40º Tilt
R W R W R W R W R W R W
81.5 15.8 3.9 20.8 3.6 25.1 2.8 81.5 10.1 5.4 14.7 4.5 19.4 3.3
81 16.7 3.9 21.6 3.6 25.8 2.8 81 10.8 5.4 15.3 4.5 19.9 3.3
80 18.5 3.9 23.4 3.6 27.4 2.8 80 12.0 5.4 16.5 4.5 21.0 3.3
79 20.1 3.9 24.8 3.5 28.9 2.8 79 13.1 5.4 17.6 4.4 22.0 3.2
78 21.8 3.9 26.3 3.4 30.3 2.8 78 14.3 5.4 18.6 4.2 22.9 3.2
77 23.4 3.9 27.8 3.3 31.6 2.7 77 15.4 5.4 19.6 4.1 23.8 3.1
76 25.1 3.9 29.2 3.2 32.9 2.7 76 16.4 5.3 20.6 4.0 24.8 3.0
75 26.5 3.8 30.6 3.1 34.1 2.6 75 17.5 5.1 21.6 3.8 25.7 3.0
73 29.4 3.6 33.3 3.0 36.6 2.5 73 19.6 4.8 23.6 3.6 27.4 2.8
70 33.4 3.3 37.3 2.8 40.2 2.4 70 22.6 4.3 26.5 3.3 30.0 2.7
68 36.2 3.2 39.8 2.7 42.4 2.3 68 24.5 4.0 28.4 3.2 31.7 2.6
65 40.2 3.0 43.4 2.5 45.7 2.2 65 27.4 3.7 31.1 3.0 34.0 2.5
63 42.5 2.8 45.7 2.4 47.9 2.2 63 29.2 3.5 32.8 2.8 35.6 2.4
60 46.1 2.7 49.0 2.3 50.8 2.1 60 32.0 3.2 35.3 2.7 37.9 2.3
58 48.4 2.6 51.3 2.3 52.8 2.1 58 33.6 3.0 36.9 2.6 39.3 2.2
55 51.5 2.4 54.2 2.2 55.5 2.0 55 36.2 2.8 39.2 2.4 41.3 2.2
53 53.3 2.1 55.8 1.9 56.9 1.8 53 37.8 2.7 40.7 2.4 42.6 2.1
50 55.7 1.7 58.1 1.5 58.8 1.4 50 40.2 2.6 42.9 2.3 44.4 2.1
48 57.4 1.5 59.5 1.3 60.1 1.2 48 41.6 2.5 44.2 2.2 45.4 2.0
45 59.7 1.2 61.5 1.0 61.9 0.9 45 43.8 2.4 46.2 2.1 47.0 2.0
43 61.1 1.0 62.9 0.8 43 45.1 2.3 47.3 2.1
40 40 47.0 2.2 49.0 2.0
38 38 48.2 2.1 50.0 2.0
35 35 49.9 2.1 51.4 1.9
33 33 50.9 2.0 52.3 1.9
30 30 52.2 2.0 53.4 1.9
28 28 53.1 2.0 54.0 1.9
25 25 54.2 1.9 54.9 1.9
23 23 54.9 1.9
G 1 G 1
- 12 -
SPEC. SHEET NO. GR-1450E-3-00102/EX-02
COUNTERWEIGHT 29.3 t
ON OUTRIGGERS FULLY EXTENDED 8.20 m SPREAD
360º ROTATION Insert jib: Option
52.6-m Boom + 14.0-m Insert jib + 18.0-m Hydraulic offset jib 35.0-m Boom + 14.0-m Insert jib + 18.0-m Hydraulic offset jib
C 5º Tilt 20º Tilt 40º Tilt C 5º Tilt 20º Tilt 40º Tilt
R W R W R W R W R W R W
81.5 18.0 3.2 22.4 2.7 27.5 2.4 81.5 12.0 4.4 16.4 3.6 21.2 2.9
81 19.0 3.2 23.4 2.7 28.2 2.4 81 12.8 4.4 17.1 3.6 21.9 2.9
80 20.8 3.1 25.3 2.7 30.1 2.4 80 14.1 4.4 18.4 3.6 23.0 2.9
79 22.6 3.0 26.9 2.6 31.5 2.3 79 15.4 4.3 19.6 3.5 24.1 2.8
78 24.2 2.9 28.4 2.5 33.1 2.3 78 16.6 4.2 20.8 3.4 25.2 2.7
77 26.2 2.9 30.1 2.5 34.5 2.2 77 17.8 4.0 22.0 3.3 26.1 2.6
76 27.8 2.8 31.7 2.4 35.9 2.1 76 19.1 3.9 23.0 3.1 27.2 2.5
75 29.3 2.7 33.2 2.3 37.3 2.1 75 20.1 3.7 24.2 3.0 28.3 2.5
73 32.5 2.5 36.1 2.2 40.2 2.0 73 22.6 3.5 26.4 2.9 30.2 2.3
70 37.1 2.3 40.4 2.0 43.9 1.8 70 25.9 3.1 29.6 2.6 33.1 2.1
68 40.1 2.2 43.2 1.9 46.6 1.8 68 28.1 2.9 31.7 2.4 35.0 2.0
65 44.3 2.0 47.2 1.8 50.2 1.7 65 31.3 2.7 34.7 2.2 37.7 1.9
63 47.0 1.9 49.7 1.7 52.5 1.6 63 33.4 2.5 36.7 2.1 39.5 1.8
60 50.8 1.8 53.4 1.6 55.9 1.5 60 36.4 2.3 39.3 1.9 42.0 1.7
58 53.3 1.7 55.7 1.5 57.8 1.4 58 38.3 2.1 41.2 1.8 43.6 1.6
55 56.9 1.6 59.2 1.5 60.9 1.4 55 41.1 1.9 43.9 1.7 45.9 1.5
53 58.8 1.4 61.2 1.4 62.6 1.3 53 42.9 1.8 45.6 1.6 47.3 1.4
50 61.7 1.2 63.9 1.2 64.9 1.1 50 45.5 1.7 48.0 1.5 49.4 1.4
48 63.6 1.1 65.5 1.0 66.1 0.9 48 47.1 1.6 49.5 1.4 50.7 1.3
45 66.0 0.8 45 49.5 1.5 51.6 1.3 52.5 1.3
43 43 51.0 1.4 53.0 1.3
40 40 53.1 1.4 54.9 1.2
38 38 54.3 1.3 56.0 1.2
35 35 56.1 1.2 57.6 1.2
33 33 57.3 1.2 58.5 1.1
30 30 58.8 1.1 59.8 1.1
28 28 59.7 1.1 60.5 1.1
25 25 60.9 1.1 61.5 1.0
23 23 61.6 1.0
G 1 G 1
- 13 -
SPEC. SHEET NO. GR-1450E-3-00102/EX-02
COUNTERWEIGHT 29.3 t
ON OUTRIGGERS FULLY EXTENDED 8.2 m SPREAD
360º ROTATION Short jib: Option
52.6-m Boom + 3.6-m Short jib 35.0-m Boom + 3.6-m Short jib
C 20º Tilt 40º Tilt C 20º Tilt 40º Tilt
R W R W R W R W
81.5 11.2 13.1 12.1 12.6 81.5 6.5 22.2 6.9 18.0
81 11.8 12.9 12.7 12.4 81 6.8 22.0 7.2 17.9
80 12.9 12.4 13.8 11.9 80 7.5 21.7 7.9 17.7
79 13.9 12.0 14.8 11.5 79 8.2 21.3 8.6 17.5
78 15.0 11.6 15.8 11.1 78 8.9 21.0 9.2 17.4
77 16.0 11.2 16.8 10.8 77 9.5 20.7 9.9 17.2
76 17.0 10.7 17.8 10.4 76 10.2 20.4 10.5 17.1
75 18.0 10.3 18.7 10.0 75 10.8 20.1 11.2 16.9
73 19.9 9.6 20.6 9.3 73 12.1 19.6 12.5 16.7
70 22.7 8.6 23.3 8.4 70 14.0 18.9 14.3 16.3
68 24.4 8.0 24.8 7.9 68 15.3 18.5 15.6 16.2
65 27.0 7.3 27.6 7.2 65 17.1 18.0 17.4 15.9
63 28.7 6.9 29.2 6.8 63 18.3 17.7 18.6 15.8
60 31.1 6.3 31.6 6.3 60 19.9 16.9 20.2 15.6
58 32.7 6.0 33.1 5.8 58 21.0 16.0 21.3 15.5
55 34.8 5.1 35.1 4.9 55 22.4 14.1 22.8 13.8
53 36.2 4.6 36.4 4.5 53 23.4 13.0 23.7 12.8
50 38.1 3.9 38.3 3.8 50 24.8 11.6 25.1 11.4
48 39.5 3.6 39.5 3.4 48 25.7 10.8 25.9 10.7
45 41.3 3.1 41.3 3.0 45 27.0 9.8 27.1 9.7
43 42.4 2.8 42.4 2.7 43 27.8 9.2 27.9 9.2
40 44.0 2.4 43.9 2.3 40 29.0 8.5 29.1 8.4
38 45.0 2.1 38 29.8 8.0
35 46.5 1.9 35 30.8 7.5
33 47.4 1.7 33 31.4 7.1
30 48.6 1.5 30 32.3 6.7
28 49.3 1.3 28 32.8 6.4
25 50.3 1.2 25 33.6 6.1
20 51.7 1.0 20 34.6 5.7
G 2 G 4
- 14 -
SPEC. SHEET NO. GR-1450E-3-00102/EX-02
A: Boom length (m) NOTE: The lifting capacity data stowed in the AUTOMATIC MOMENT LIMITER
B: Load radius (m) (AML-C) is based on the standard number of parts of line listed in the chart.
C: Loaded boom angle (º) Standard number of parts of line for on-rubber operation should be
D: Minimum boom angle (º) according to the chart.
for indicated length (no load)
E: Number of parts of line
Working area
Approx. Approx.
10˚ 10˚
-15-
SPEC. SHEET NO. GR-1450E-3-00102/EX-02
-16-
SPEC. SHEET NO. GR-1450E-3-00102/EX-02
-17-
MEMO
MEMO
(International Sales Division) Te l : +81-(0)3-3621-7750
Fax: +81-(0)3-3621-7785
4-12, Kamezawa 2-chome,
URL http://www.tadano.com/
Sumida-ku, Tokyo 130-0014, Japan Printed in Japan
E-mail info@tadano.com
2017-12-1