Professional Documents
Culture Documents
Manual User: ZWG1100M ZWG1140M ZWG1120M
Manual User: ZWG1100M ZWG1140M ZWG1120M
User
Manual
Washing
Machine
ZWG1100M
ZWG1120M
ZWG1140M
Contents
Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _2 Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _13
Product description _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 What to do if ... _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 15
Control Panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5 Technical data _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 17
Washing programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ 7-8 Installation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 18
Helpful hints and tips _ _ _ _ _ _ _ __ _ _ _ _ _ _ _ 9 Electrical connection_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 19
First use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 10 Environmental concerns _ _ _ _ _ _ _ _ _ _ _ _ _ _19
Personalisation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 10
Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _11
Subject to change without notice
Safety information
Important! Read carefully & keep for future • Any objects such as coins, safety pins, nails,
reference. screws,stones or any other hard, sharp material
• The safety of your appliance complies with the can cause extensive damage and must not be
industry standards and with legal requirements on placed into the machine.
the safety of appliances. However, as • Only use the advised quantities of fabric softener
manufacturers, we feel it is our duty to provide the and detergent. Damage to the fabric can ensue if
following safety notes. you over-fill. Refer to the manufacturer’s
• It is most important that this instruction book recommendations of quantities.
should be retained with the appliance for future • Wash small items such as socks, laces, washable
reference. Should the appliance be sold or belts etc in a washing bag or pillow case as it is
transferred to another owner, or should you move possible for such items to slip down between the
house and leave the appliance, always ensure that tub and the inner drum.
the book is supplied with the appliance in order • Do not use your washing machine to wash articles
that the new owner can get to know the functioning with whalebones, material without hems or torn
of the appliance and the relevant warnings. material.
• You MUST read them carefully before installing or • Always unplug the appliance and turn off the
using the appliance. watersupply after use, cleaning and maintenance.
• Before first starting up, check the appliance for any • Under no circumstances should you attempt to
damage incurred during transport. Never connect repair the machine yourself. Repairs carried out by
up a damaged appliance . If parts are damaged, inexperienced people may cause injury or serious
contact your supplier. malfunctioning. Contact your local Service Centre.
• If the appliance is delivered in the winter months Always insist on genuine spare parts.
when there are minus temperatures, store it at
Installation
room temperature for 24 hours before using for the
• This appliance is heavy. Care should be taken
first time.
when moving it.
General safety • When unpacking the appliance, check that it is not
• It is dangerous to alter the specifications or attempt damaged. If in doubt, do not use it and contact the
to modify this product in any way. Service Centre.
• During high temperature wash programmes the
doorglass may get hot. Do not touch it!
• Make sure that small children and pets do not climb
into the drum.To avoid this, please check into the
drum before using.
2
ZANUSSI
• All packing and transit bolts must be removed If volatile cleaning fluids are used, care should be
before use. Serious damage can occur to the taken to ensure that the fluid is removed from the
product and to property if this is not adhered to. garment before placing in the machine.
See relevant section in the user manual. • Never pull the power supply cable to remove the
• After having installed the appliance, check that it is plug from the socket; always take hold of the plug
not standing on the inlet and drain hose and the itself.
worktop is not pressing the electrical supply cable • Never use the appliance if the power supply cable,
against the wall. the control panel, the working surface or the base
• If the machine is situated on a carpeted floor, are damaged so that the inside of the washing
please adjust the feet in order to allow air to machine is accessible.
circulate freely under the appliance.
Child safety
• Always be sure, that there is no water leakage
• This appliance is not intended for use by person
from hoses and their connections after the
(including children) with reduced physical sensory
installation.
or mental capabilities or lack of experience and
• If the appliance is installed in a location subject to
knowledge unless they have been given
frost, please read the “dangers of freezing” chapter.
supervision or instruction concerning use of the
• Any plumbing work required to install this appliance
appliance by a person responsible for their safety.
should be carried out by a qualified plumber or
• The packaging components (e.g. plastic film,
competent person.
polystyrene) can be dangerous to children - danger
• Any electrical work required to install this appliance
of suffocation! - Keep them out of children’s reach!
should be carried out by a qualified electrician or
• Keep all detergents in a safe place out of children’s
competent person.
reach.
Use • Make sure that children or pets do not climb into
• This appliance is designed for domestic use. It the drum. To prevent children and pets becoming
must not be used for purposes other than those for trapped inside the drum this machine incorporates
which it was designed. a special feature.
• Only wash fabrics which are designed to be
machine washed.Follow the instructions on each
garment label.
• Do not overload the appliance. See the Washing
Programme Table.
• Before washing, ensure that all pockets are empty
and buttons and zips are fastened. Avoid washing
frayed or torn articles and treat stains such as
paint, ink, rust, and grass before washing.
Underwired bras must NOT be machine washed.
• Garments which have been in contact with volatile
petroleum products should not be machine
washed.
3
Product description
«MAX»
4
ZANUSSI
Control panel
1 2 3 4
9 8 7 6 5
5
Additional child lock.
• There is an additional, selectable child safety
feature. To select it, press button 5 for three
seconds. The Child Lock button also locks the
Start/Pause button. An English text and the image
of the head of a child appear in the display when
the lock is activated.
You can now also press the Pause button without
anything happening.
There will just be an error beep. When the
programme has finished, the door can be opened,
but to select the next wash you need to press the
Child Lock button once more to cancel the child
lock.
Turning the machine off and then on again will not
cancel the child lock, so it can be left permanently
locked.
6
Fabric
Maximum Maximum spin speed The maximum washing Detergent box Default Clothes to be
temperature Extra Rinse Pre-Wash
(Centigrade) RPM capacity (kilogram) operation time washed (suggestion)
Cycle I Pre-wash II Main wash Softener
Cottons
95 1000 1200 6 Optional Optional 1:23 Ordinary clothes
Quick
Kidswear
60 1000 1200 3 1:20 children's wear
7
ZANUSSI
8
Fabric
Maximum Maximum spin speed The maximum washing Detergent box Default Clothes to be
temperature Extra Rinse Pre-Wash
(Centigrade) RPM capacity (kilogram) operation time washed (suggestion)
Cycle I Pre-wash II Main wash Softener
Cottons
95 1400 6 Optional Optional 1:24 Ordinary clothes
Quick
Kidswear
60 1400 3 1:21 children's wear
Sorting out the laundry Ink: depending on the type of ink, moisten the fabric
Follow the wash code symbols on each garment label first with acetone*, then with acetic acid; treat any
and the manufacturer’s washing instructions. Sort the residual marks on white fabrics with bleach and then
laundry as follows: whites, coloureds, synthetics, rinse thoroughly.
delicates, woollens. Tar stains: first treat with stain remover, methylated
Before loading the laundry spirits or benzine, then rub with detergent paste.
Never wash whites and coloureds together. Whites Detergents and additives
may lose their «whiteness» in the wash. Good washing results also depend on the choice of
New coloured items may run in the first wash; they detergent and use of the correct quantities to avoid
should therefore be washed separately the first time. waste and protect the environment.
Button up pillowcases, close zip fasteners, hooks and Although biodegradable, detergents contain
poppers. Tie any belts or long tapes. substances which, in large quantities, can upset the
Remove persistent stains before washing. delicate balance of nature.
Rub particularly soiled areas with a special detergent The choice of detergent will depend on the type of
or detergent paste. fabric (delicates, woollens, cottons, etc.), the colour,
Treat curtains with special care. Remove hooks or tie washing temperature and degree of soiling.
them up in a bag or net. All commonly available washing machine detergents
Removing stains may be used in this appliance:
Stubborn stains may not be removed by just water • powder detergents for all types of fabric
and detergent. It is therefore advisable to treat them • powder detergents for delicate fabrics (60°C max)
prior to washing. and woollens
Blood: treat fresh stains with cold water. For dried • liquid detergents, preferably for low temperature
stains, soak overnight in water with a special wash programmes (60°C max) for all types of fabric,
detergent then rub in the soap and water. or special for woollens only.
Oil based paint: moisten with benzine stain remover, The detergent and any additives must be placed in
lay the garment on a soft cloth and dab the stain; the appropriate compartments of the dispenser
treat several times. drawer before starting the wash programme.
Dried grease stains: moisten with turpentine, lay the If using liquid detergents, a programme without
garment on a soft surface and dab the stain with the prewash must be selected.
fingertips and a cotton cloth. Your appliance incorporates a recirculation system
Rust: oxalic acid dissolved in hot water or a rust which allows an optimal use of the concentrated
removing product used cold. Be careful with rust detergent.
stains which are not recent since the cellulose Follow the product manufacturer’s recommendations
structure will already have been damaged and the on quantities to use and do not exceed the «MAX»
fabric tends to hole. mark in the detergent dispenser drawer.
Mould stains: treat with bleach, rinse well (whites Quantity of detergent to be used
and fast coloureds only). The type and quantity of detergent will depend
Grass: soap lightly and treat with bleach (whites and on the type of fabric, load size, degree of soiling
fast coloureds only). and hardness of the water used.
Ball point pen and glue: moisten with acetone*, lay Follow the product manufacturers’ instructions
the garment on a soft cloth and dab the stain. on quantities to use.
Lipstick: moisten with acetone as above, then treat Use less detergent if:
stains with methylated spirits. Treat any residual • you are washing a small load
marks with bleach. • the laundry is lightly soiled
Red wine: soak in water and detergent, rinse and • large amounts of foam form during washing.
treat with acetic or citric acid, then rinse. Treat any
residual marks with bleach. * do not use acetone on artificial silk.
9
Degrees of water hardness
Water hardness is classified in so-called
«degrees» of hardness. Information on hardness
of the water in your area can be obtained from
the relevant water supply company, or from your
local authority. If the water hardness degree is
medium or high we suggest you use a water
softener, following the manufactures
instructions.
When the degree of hardness is soft, re-adjust
the quantity of the detergent.
First Use
• Ensure that the electrical and water connections • Run a cotton cycle at the highest temperature
comply with the installation instructions. without any laundry in the machine, to remove any
• Remove any material from the drum. manufacturing residue from the drum and tub. Pour
1/2 a measure of detergent into the main wash
compartment and start the machine.
Personalization
10
ZANUSSI
Daily Use
Load the laundry With this button you can select an additional Prewash
Open the door by or an additional Rinse or both.
carefully pulling the door When this button is pressed, the corresponding pilot
handle outwards. Place light illuminates. When it is pressed again, the pilot
the laundry in the drum, light goes out.
one item at a time,
Start the programme by pressing button 4
shaking them out as much
To start the selected programme, press this button.
as possible. Close the
The icon illuminates to indicate that the appliance
door.
starts operating and the door is locked.
If you have chosen a delayed start, the machine will
Measure out the detergent and the fabric softener
begin the countdown.
Pull out the dispenser drawer until it stops. Measure
out the amount of detergent required, pour it into the Select the Delay Start by pressing button 6
main wash compartment or in the appropriate Before you start the programme, if you wish to delay
compartment if the selected programme/option it the start, press this button to select the desired delay.
requires (see more details in «Detergent dispenser The selected delay time value will appear on the
drawer»). display for a few seconds, then the duration of the
If required, pour fabric softener into the compartment programme will appear again. By pressing this button,
marked (the amount used must not exceed the the washing programme can be delayed by 1 hour up
«MAX» mark in the drawer). Close the drawer gently. to a maximum of 24 hours.
You must select this option after you have set the
Select the required programme by means of the
programme and before you start the programme.
programme selector dial (3)
You can cancel or modify the delay time at any
Turn the programme selector dial to the required
moment, before you press button 4.
programme.
Selecting the delay start:
The selector dial can be turned either clockwise or
1. Select the programme and the required options.
anticlockwise.
2. Select the delay start by pressing button 6.
Turn the selector dial to position O to reset the 3. Press button 4:
programme or to switch the machine off. - the machine starts its hourly countdown.
At the end of the programme the selector dial must be - the programme will start after the selected delay
turned to position O, to switch the machine off. has expired.
Important! If you turn the programme selector dial to
another programme when the machine is working, the
machine will not perform the new selected
programme.
Select the spin speed by pressing button 7
When selecting a programme, the appliance
proposes automatically a suggested spin speed for
that programme. (See «Washing programmes» for
the maximum allowed spin speed).
Press this button repeatedly to change the spin
speed, if you want your laundry to be spun at a
different speed. The relevant pilot light illuminates.
Select the available options by pressing buttons 2
11
Cancelling the Delay Start after having started the 3. Reduce the spin speed if needed, by pressing the
programme: relevant button.
1. Set the washing machine to PAUSE by pressing 4. Press button 4.
button 4. At the end of the programme, the door is released,
2. Press button 6repeatedly until the display shows 0'. after few minutes, and can be opened. Turn the
3. Press button 4 again to start the programme. programme selector dial to O to switch the machine
Important! off.
• The door will be locked throughout the delay time. Remove the laundry from the drum and carefully
If you need to open the door, you must first set the check that the drum is empty. If you do not intend to
washing machine to PAUSE by pressing button 4 carry out another wash, close the water tap. Leave
and wait a few minutes before opening the door. the door open to prevent the formation of mildew and
After you have closed the door, press the same unpleasant smells.
button again.
Stand-By:
Important! The Delay Start cannot be selected with
1. Once the programme has finished after a few
the draining programme.
minutes the energy saving system will be enabled.
Altering an option or a running programme The brightness of the display and the indicator pilot
It is possible to change some options before the lights are off.
programme carries them out. 2. If the appliance is switch on but in PAUSE, only the
Before you make any change, you must pause the brightness of the display is off.
washing machine by pressing button 4. By pressing any button the appliance will come out of
Changing a running programme is possible only by the energy saving status.
resetting it. Turn the programme selector dial to O
and then to the new programme position. Start the
new programme by pressing button 4 again.
The washing water in the tub will be not emptied out.
Interrupting a programme
Press the button 4 to interrupt a programme which is
running.
Press the button again to restart the programme.
Cancelling a programme
Turn the selector dial to O to cancel a programme
which is running, and wait few minutes to open the
door (it is possible only if in the tub there is not
water).
At the end of the programme
The machine stops automatically.
The blinking zero appears on the display.
If a programme or an option that ends with water left
in the tub has been selected, the door is locked to
indicate that the water must be emptied out before
opening the door.
Follow the below instructions to empty out the water:
1. Turn the programme selector dial to O.
2. Select the draining or spinning programme.
12
ZANUSSI
Care and cleaning
Pump cover
2 Pull out at the same time 3 Clean 4 When no more water comes out, unscrew the
pump cover and remove it. Always keep a rag nearby
Flush it out under a tap, to remove any traces of to dry up spillage of water when removing the cover.
accumulated powder. 5 Remove any objects from the pump impeller by
Cleaning the drawer recess rotating it.
Havin g removed the drawer, 6 Screw the pump cover fully in.
use a small brush to 7 Close the pump door.
clean the recess ensuring Warning!
that all washing powder When the appliance is in use and depending on the
residue is removed from programme selected there can be hot water in the
the upper and lower part pump. Never remove the pump cover during a wash
of the recess. cycle, always wait until the appliance has finished the
Replace the drawer and cycle, and is empty. When replacing the cover,
run the rinse programme without any clothes in the ensure it is securely retightened so as to stop leaks
drum. and young children being able to remove it.
13
If you wash rugs, it is compulsory to inspect and Frost precaution or emergency emptied out
clean the filter. If the machine is exposed to temperatures below 0°C
or if the water is not discharged, proceed as follows.
Cleaning the water inlet filters
1 Pull out the plug from the power socket.
Important!
2 Turn off the water tap.
If the appliance doesn't fill, takes long to fill with water,
3 Unscrew the inlet hose.
the starting button blinks yellow or the display (if
4 Place a bowl on the floor and place the end of the
available) shows the relevant alarm (see chapter
inlet and drain hoses into it. The water should drain
«What to do if...» for more details), check if the water
by gravity into the bowl.
inlet filters are blocked.
5 Select and run a draining programme.
To clean the water inlet filters:
6 Clean the pump if necessary as previously
• Turn off the water tap.
described.
• Unscrew the hose
7 Screw the water inlet hose back on.
from the tap.
8 When you intend to start the machine up again,
• Clean the filter in the
make sure that the room temperature is above
hose with a stiff brush.
0°C.
• Screw the hose back onto the tap. Make sure the
connection is tight.
14
ZANUSSI
What to do if.....
Certain problems are due to lack of simple Before contacting your local Service Centre, please
maintenance or oversights, which can be solved carry out the checks listed below.
easily without calling out an engineer.
Malfunction Possible Cause / Solution
Close the washing machine's door.
The washing machine does not work
Press the ▽S tart/Pause▼key.
Water leakage Correctly connect the inlet water pipe.
The spin of the clothes is abnormal Reload and distribute the laundry evenly in the drum.
There is the peculiar smell in the wa- Run a Self-clean cycle without any clothes.
shing machine
No water is visible in the drum No fault-water is under the visible area.
There is the remaining water in the No fault- the effect of the softener will not be affected.
softener's box
The water-fast component of the non-phosphorus
detergent will be left on the clothes to form into spot.
The remaining detergent is left on
Please select «Rinse&Spin» programme.
the clothes
or brush away the fleck after the clothes is dried.
15
Malfunction Possible Cause / Solution
Check if the amount of detergent is excessive,
Foam spills from the detergent if it is the specialized detergent for the drum
drawer washing machine.
Dip one scoop of the softener mixed with 1/2 liter
of water to the detergent box II.
Reduce the amount of detergent used next time.
Alarm codes
If the washing machine cannot work normally, a alarm code will appear on the display. Please carry
out the following checks.
Inlet water Open the water tap, to check if the inlet hose is squashed
overtime or kinked, check if the filter in the inlet valve is blocked or
not; check if the water pressure is too low.
Overtime of
Check if the drain pump is blocked (see page 11).
the drainage
The door has Check if the door of the washing machine is closed˙check
not been closed if the clothes are trapped by the door seal.
Others Try to use again or contact your local service center if the
problem persists.
16
ZANUSSI
If you are unable to identify or solve the problem,
contact our service centre. Before telephoning, make
a note of the model, serial number and purchase date
of your machine. The Service Centre will require this
information.
Technical data
17
Installation
Water inlet
Caution! This appliance must be connected to a
Fill the holes with the cold water supply.
corresponding plastic Caution! Before connecting up the appliance to
plug caps supplied in the new pipework or to pipework that has not been
bag containing the used for some time, run off a reasonable amount of
instruction booklet. water to flush out any debris that may have collected
Caution! Do not use the hose from your previous
appliance to connect to water supply.
Electrical connection
Information on the electrical connection is given on to comply with the above safety precaution.
the rating plate on the inner edge of the appliance Caution! Should the appliance power supply cable
door. Check that your domestic electrical installation need to be replaced, this MUST be carried out by
can take the maximum load required, also taking into a Service Centre.
account any other appliances in use.
Caution! Connect the machine to an earthed The power supply cable must be easily accessible
socket. after installing the machine.
Caution! The manufacturer does not accept any
responsibility for damage or injury through failure
Environment concerns
The symbol on the product or on its packaging For more detailed information about recycling of this
indicates that this product may not be treated as product, please contact your local council, your
household waste. Instead it should be taken to the household waste disposal service or the shop where
appropriate collection point for the recycling of you purchased the product.
electrical and electronic equipment. By ensuring this
product is disposed of correctly, you will help prevent Packaging materials
potential negative consequences for the environment The materials marked with the symbol are recyclable.
and human health, which could otherwise be caused >PE<=polyethylene
by inappropriate waste handling of this product. >PS<=polystyrene
>PP<=polypropylene
>PAP<=paper
19
ZANUSSI
www.electrolux.com
www.zanussi.be