Professional Documents
Culture Documents
Recommendation of Genuine Filter & Lubricants: Lubricant
Recommendation of Genuine Filter & Lubricants: Lubricant
Recommendation of Genuine Filter & Lubricants: Lubricant
Technical Support
Model : ZX470LC-5G
LUBRICANT
Interval of Periodic Service ( liter )
COMPONENT PART NUMBER DESCRIPTION 250 500 1000 1500 2000 2500 3000 4000
NOTES:
- Maintenance interval stated above when machine operated using B20
-(*) Maintenance required when operating in water or mud and under extreamly severe condition.
- ( ** ) Maintenance required only during first time check.
- ( *** ) Check and add grease.
- Change travel reduction gear oil every 1000h if travel ratio more than 20%.
- Change hydraulic oil will be shorter if use Hydraulic breaker as attachment, refer to maintenance manual book.
- Change coolant twice a year if not use Hitachi long life coolant.
FILTER
Interval of Periodic Service ( Pcs )
COMPONENT Part Number 250 500 1000 1500 2000 2500 3000 4000
Number of Filter 3 5 12 5 12 5 12 13
IMPORTANT !
> The maintenance guide table is affixed to the reverse side of the tool box cover.
> Always use recommended Fuels and Lubricants.
> Drain fuel sump every day in the morning before start the machine
> Failure to do so will result in machine damage and loss of Hitachi Products Warranty.
> The Turbocharge may be damage if the engine is not proprly shut down.
> Grease bucket and link pivots every day until break-in operation (50 hours) is complete.
> When any bucket others than the one with adjustment devices provided exclusively for Zaxis series is used, grease the two bucket connecting pin every 250 hrs.
Jun-19