Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

ventas@energyplam.

com

GENERATOR SETS POW ERED BY CUMMINS ENGINE


MODEL YN-35C
STANDBY POWER 28KW/35KVA
PRIME POWER 25KW/31KVA
STANDARD FEATURES
●Engine: POWER BY CUMMINS ENGINE 4B3.9-G2
●Alternator (PI144F), single bearing, IP22, Brushless,
Self-excited, Insulation class H
●Radiator 50℃ max, fans are driven by belt, with safety guard
●Control system
●charge alternator
●Air filter, fuel filter, oil filter
●Main line circuit breaker
●24V DC start motor and storage battery
●Ripple flex exhaust pipe, exhaust siphon, flange, muffler
●Open type dimension (m): 1.8x0.85x1.41
*Picture for reference only

Main specifications of generating set


ENGINE DATA
Diesel Engine Model 4B3.9-G2
Prime power 27KW
Standby Power 30KW
Aspiration Natural
Bore(mm)*Stroke(mm) 102x120
Cylinder Number 4
Displacement (liters) 3.9
Compression Ratio 16.5:1
Speed Governing Ratio Electronic Speed governing ratio 1%
Exhaust Gas Temperature (℃) 365
Rated Fuel Consumption at 50% load-L/h 4.5
Rated Fuel Consumption at 75% load-L/h 5.8
Rated Fuel Consumption at 100% load-L/h 7.6
Total lubrication system capacity (L) 11
Lube Consumption (g/kw.h) <1 with 100h of operation , <0.4 after 100h of operation
Coolant capacity ( inc. radiator) (L) 18

Pag.1 of 2
Main specifications of generating set
ALTERNATOR DATA
Alternator Model PI144F
Continuous Output(KW/KVA) 25.8/32.3
Power Efficiency
Type 4 Pole, Rotating Field
Exciter type Brushless, Self excited
Voltage regulator AVR.440
Voltage regulation ±1.0% with 4% engine governing
Insulation Class H
Protection IP22
Rated Power factor 0.8
Winding leads 12
Waveform distortion No load < 1.5%
Altitude ≤1000m

ASSEMBLY
The engine and alternator are closed coupled by means of an SAE flange.
A full torsional analysis has been carried out to guarantee no harmful vibration will occur.
Anti-vibration pads are affixed between engine alternator feet and the base frame.
Rubber diagonal isolators are specially designed to reduce engine and alternator vibration and
prevent distortion in the voltage and harmonic output of the generator.
All iron and steel surfaces of canopy fabrications have been treated for coating by grit blast cleaning ,
Then covered by a polyester powder paint which provides an excellent corrosion resistance surface

CONTROL SYSTEM
DSE4520 Features
• Largest back-lit icon display in its class • Engine hours counter
• Fully configurable via the fascia or PC using USB • Engine pre-heat
communication • Engine run-time scheduler
• Extremely efficient power save mode • Battery voltage monitoring
• 3 phase generator sensing • Start on low battery voltage
• 3 engine maintainance alarms • Configurable remote start input
• Engine speed protection • 1 alternative configuration
• Configurable event log (250) • Comprehensive warning,electrical trip or shutdown
• Control logic facilities protection upon fault condition
• Easy access diagnostic page • LCD alarm indication
• 3 configurable analogue/digital inputs • Event log (15)
• Configurable staged loading outputs • 3 phase mains (utility) sensing (DSE4520 only)
• 4 configurable digital inputs • Generator/load power monitoring (kW, kV A, kV Ar, pf)
• CAN and alternator speed sensing in one variant • Generator/load current monitoring and protection
• 4 configurable DC outputs (2 for DSE4510)• Fuel and crank outputs (configurable when using CAN)

The Yanan generator sets compliance with all main standards,such as ISO 8528,ISO14000,ISO3046
GB755,BS5000,VDE0530,
ISO3046,IEC34-1
Warranty policy
Guarantee for one year or 1200 hours (accord to whichever reach first)from ex-factory date.During the guarantee period,our
company will provide the free easy-damaged spare part for problems caused by our quality of production or raw
material,except the damageable spare parts of diesel engine caused by customer's incorrect man-made operation.After
expiration,our company provides cost spare parts maintenance for gen-set.

Pag.2 of 2
Powered by TCPDF (www.tcpdf.org)

You might also like