Professional Documents
Culture Documents
Price List: Heavy Duty Foodwaste Disposers and Electrical Controls
Price List: Heavy Duty Foodwaste Disposers and Electrical Controls
Price List: Heavy Duty Foodwaste Disposers and Electrical Controls
TABLE OF CONTENTS
Disposer Line-up 2 Control Centers and Options 9
1
DISPOSER LINE-UP
HOW TO ORDER
Step 1: Choose Basic Disposer model number (add adaptor from EXAMPLE:
P.14 if required for a replacement disposer). H114S-R (Basic Disposer)……………
H-C15 (Mounting Ass’y)……………..
Step 2: Choose Mounting Assembly Option (Sink or Cone). MS-1 (Switch)…………………………….
Step 3: Choose Switch or Control Center from page 8 or 9. Total Cost………………..
2
MODEL NO. DESCRIPTION SHIP WT LIST
LBS PRICE
Includes:
6 mounting bolts
Splash Guard Gasket
Models H112 through H2 supplied with center support leg
Phases, Voltages and Hertz
1 Phase: 115/230V, 60Hz
3 Phase: 208-230/460V, 60Hz
For regular sink attachment. Suspend from standard sink having a 3-1/2” to 4”
diameter sink opening.
Includes:
Mounting Head and Gaskets
Sink Stopper
1/2” Solenoid Valve (specify voltage)
3GPM Flow Control Valve
1/2” Vacuum Breaker
8
H-RSA Sink Assembly
OR
For regular cone attachment. Suspends from cone welded to dish-table.
Includes:
Stainless Steel Cone (choice of 12”, 15” or 18”) and gasket
Water Swirl Inlet Valve
Vinyl Silver Saver Scrapping Ring
1/2” Solenoid Valve (specify voltage)
3GPM Flow Control Valve
1/2” Vacuum Breaker
H-C12
H-C15 12” Cone Assembly
15” Cone Assembly 18
H-C18
18” Cone Assembly
3
MODEL NO. DESCRIPTION SHIP WT LIST
LBS PRICE
Includes:
4-1/2” or 7” dia X 8” long flexible neoprene connector sleeve
2 Stainless Steel Clamps
Phases, Voltages and Hertz
1 Phase: 115/230V, 60Hz
3 Phase: 208-230/460V, 60Hz
OR
For regular cone attachment. Adjustable leg support.
Includes:
Stainless Steel Cone (choice of 12”, 15” or 18”) and gasket
Water Swirl Inlet Valve
Vinyl Silver Saver Scrapping Ring
1/2” Solenoid Valve (specify voltage)
8GPM Flow Control Valve
1/2” Vacuum Breaker
A-C412 For 4.5” Throat Size:
A-C415 12” Cone Assembly
A-C418 15” Cone Assembly
18” Cone Assembly 18
Includes:
7” dia. X 8” long flexible neoprene connector sleeve
2 Stainless Steel Clamps
All 7” diameter throat size
Phases, Voltages and Hertz
208-230/460V, 60Hz
190/380V, 50Hz
-O OFFSET DESIGN:
For Offset Drum Option replace –R with –0 at end of model number.
ADD: 35
FOR NEW INSTALLATION:
Includes:
7” dia. X 8” long flexible neoprene connector sleeve
2 Stainless Steel Clamps
All 7” diameter throat size
Phases, Voltages and Hertz
208-230/460V, 60Hz
190/380V, 50Hz
-O OFFSET DESIGN:
For Offset Drum Option replace –R with –0 at end of model number.
ADD: 40
FOR NEW INSTALLATION:
9.2 CU.FT.
For complete assembly in a new installation, Mounting
Assembly, Switch or Control Center must be added to
the Basic Disposer. Sink or Cone Assembly choices are
listed below and Switch or Control Center choices are
listed on pages 8 and 9.
OR
For regular cone attachment. Adjustable leg support.
Includes:
Stainless Steel Cone (choice of 12”, 15” or 18”) and gasket
Water Swirl Inlet Valve
Vinyl Silver Saver Scrapping Ring
1/2” Solenoid Valve (specify voltage) *
(2)10GPM Flow Control Valves
1/2” Vacuum Breaker *
C-C12
12” Cone Assembly
C-C15 18
15” Cone Assembly
C-C18
18” Cone Assembly
* For 3/4” option, see page 10.
6
355
385
400
135
165
180
400
7
MS-1 5 4
MS-2 5 4
MC 3
RMS-2 3
RMS-3 5
RMS-5 7
8
RAC1 20
RAC1 20
1.0CU.FT
RAC2 20
RAC2 20
1.0CU.FT
RS 4
PF —— No
Charge
—— No
Charge
9
05-5-154 2
05-5-152 2
05-5-155 2
05-5-151 2
05-5-153 2
05-5-157 2
05-5-150 2
05-5-148 2
10-5-201 2
10-5-202 2
10-H-303
2
10-AB-308
2
10-C-310
2
50
10
06-HA-ST4 2
06-ABC-ST7 3
06-A-414 2
06-4-818 2
06-ABC-434 3
06-ABC-834
3
08-A-19 1
08-ABC-33 1
04-A-104 2
04-ABC-107 2
10-5-701 1
30-5-212 4
30-5-215 4
30-5-218 5
30-H-124 4
30-H-154 6
30-H-184 7
30-A-124 4
30-A-154 6
30-A-184 7
30-ABC-127 4
30-ABC-157 6
30-ABC-187 7
11
10-5-502 10
10-5-503 10
30-5-220 8
12
13
14
15
16
ITEM NO.______________
MODEL “H”
“H” SERIES ‐ BASIC DISPOSER
H12S‐R 1/2
1 4.25”
H12P‐R 1/2 3 4.25”
H34S‐R 3/4 1 4.25”
REGULAR
H34P‐R 3/4 3 4.25”
H114S‐R
1.25 1 4.25”
H114P‐R 1.25 3 4.25”
OPTIONAL FEATURES:
□ ADAPTOR KITS: Adaptor kits are available to allow installa
on of Red Goat Disposers to
virtually any sink or cone size or configura on. Refer to “Adaptor Kit Selec on Guide” for
specific kit model numbers.
PRODUCT INFORMATION:
□ APPLICATION: Small restaurant kitchen or salad prep areas in large kitchen. Snack bars,
schools and churches where food waste is light and volume is not great.
□ DESIGN AND CONSTRUCTION:
Motor: reversing, con nuous duty ra ng. Equipped with manual reset thermal over‐
load inherent protector. Permanently lubricated ball bearings for upper and lower
shelf support. Upper bearing is sealed on both sides.
Housings: Heavy aluminum grind and discharge housings. Four bolts fasten the motor
unit to the grind chamber, permit easy removal.
Moun ng: Disposer suspends from Cone or Sink Assembly.
Sta onary Shredder Ring: 1‐3/4” high, 4 machine ground primary ac on breaker bars,
42 secondary ac on grinding teeth.
Flywheel: Breaker blade, mounted at center, speeds grinding, prevents objects from
“riding” at center. Two hardened stainless steel cu er blocks (fastened to flywheel
with nylock screws) are replaceable, can be indexed for new cu ng edges. Ni‐Resist
flywheel is 6‐3/8” diameter, slots undercut the shredder ring to assure that par cles
are cut to proper size before passing to the drain line. Tight tolerance in the cu ng
mechanism allows for approximately 1/8” or 3.175mm or less of waste to pass
through to sanitary.Tight tolerance in the cu ng mechanism allows for approximately
1/8” or 3.175mm or less of waste to pass through to sanitary.
Table Cutout
Sink mounting assembly will fit
3-1/4” ID 13” for 12” Cone
standard 3-1/2” to 4” diameter
opening. 16” for 15” Cone
18” Cone
19” for
6” for 12” Cone
5” for 15”Cone
DISPOSER SHOWN WITH SINK MOUNTING ASSEMBLY DISPOSER SHOWN WITH CONE MOUNTING ASSEMBLY
*GLOBE VALVE
POWER
SUPPLY
SOLENOID VALVE
FLOW CONTROL * GATE VALVE
VALVE
1/2” COLD WATER
SUPPLY
Red Goat Disposers
165 Independence Ct. Lancaster, PA 17601 * These items are not supplied by Red Goat Disposers.
800‐237‐6628 x 181 Fax: 717‐397‐1997
www.redgoat.com
ITEM NO.______________
MODEL “A”
“A” SERIES ‐ BASIC DISPOSER
TYPE Model No. HP PH Throat Size
OPTIONAL FEATURES:
□ For Hard Chrome op on, add HC to the end of the disposer model number.
□ ADAPTOR KITS: Adaptor kits are available to allow installa on of Red Goat Disposers to virtually any sink or
cone size or configura on. Refer to “Adaptor Kit Selec on Guide” for specific kit model numbers.
PRODUCT INFORMATION:
□ APPLICATION: Medium size restaurant kitchen. Ideal for vegetable prepara on, salad and pot sink areas of
large kitchens. Complies with military specifica ons, including shipboard use. Can be used with salt water
applica ons (specify HC op on).
□ DESIGN AND CONSTRUCTION:
Waste chamber design permits dual direc onal opera on when used with reversing control or switch,
doubling the life cycle of the sha ering mechanism. Regular waste chamber available with either a 4‐
1/2” or 7” throat size.
Tight tolerance in the cu ng mechanism allows for approximately 1/8” or 3.175mm or less of waste to
pass through to sanitary.
Basic body components are cast gray iron, machined, primed and powder coated. 8” Diameter rotor
with (2) bolt‐on reversible impact bars and sizing ring are cast duc le iron, machined, balanced and heat
treated.
“A” Series Bolt‐on, threaded discharge flange for easy removal and ridged drain connec on. Also includes flexible
drain connector that slips over flange and fastens quickly to either metal or PVC drain line (2” pipe size).
Regular Design
This allows installer op ons that best fit their need.
7” Throat Size Stainless steel legs and feet, adjustable from 0” to 2”.
Disposer connects to Cone or Sink Assembly by means of a neoprene isola on sleeve and (2) stainless
(Shown) steel clamps.
Offset Design: For maximum space u liza on, disposer is also available with an 8” offset waste chamber
Also available with: for both Cone and Sink a achments. (Available with 7” diameter throat size only)
□ MOTOR:
4.5” Throat Size Reversing, con nuous duty, 1725 RPM (1425RPM, 50Hz), full rated horsepower, double sealed, perma‐
nently lubricated ball bearings.
Or
Thermal overload protec on with manual reset bu on.
Offset Design with 7” Throat Available for single phase or three phase installa ons.
Available in 1‐1/2HP for light waste, 2HP for standard use, 3 & 5HP for heavy duty use.
Dual voltage windings allow mul ‐voltage opera on by motor lead connec on (see motor wiring dia‐
gram). 115‐230V, 60Hz; 110/220V, 50Hz, 1Ph; 208‐230/460V, 60Hz; 208/415V, 50Hz, 3Ph.
□ CONTROLS: NOTE: Electrical switches or control centers not included, must be selected as required.
□ PLUMBING:
Red Goat Disposers 8GPM @ 20PSIG, 1/2” NPT
165 Independence Ct. Lancaster, PA 17601 2” Drain line with trap
Not grease trap compliant
800‐237‐6628 x 181 Fax: 717‐397‐1997
□ ELECTRICAL:
www.redgoat.com Please refer to electrical requirements on the last page.
ITEM NO.______________
MODEL “A”
THREE PHASE THREE PHASE SINGLE PHASE SINGLE PHASE
HP Volts/60Hz Amps Volts/50Hz Amps Volts/60Hz Amps Volts/50Hz Amps
208 4.4 208 4.8 115 16 110 15
1.5 230 4.2 230 8 220 7.5
460 2.1 415 2.4
208 6 208 6.3 115 17.6 110 19
2 230 5.8 230 8.8 220 9.5
460 2.9 415 3.3
208 9.9
208 10.4
3 230 9 N/A N/A
460 4.5 415 5.2
208 14.8
5 230 14 N/A N/A N/A
460 7
NOTE: All dimensions shown at 0” foot height adjustment.
TABLE CUTOUT
6” for 12” Cone Cutout 5-1/2”
1” Cone
13” for 12”
4-1/2” 1”
5” for 15” Cone 4-1/2” ID
16” for 15” Cone
7” for 18” Cone
19” for 18” Cone
1” Min 6” Max
1” Min 6” Max
4.5” Regular Drum with Cone Moun ng Assembly 1”
8” 4.5” Regular Drum with Sink 7”
1” Moun ng Assembly
7”
Water Inlet
6” for 12” Cone 8”
1” Min
5” for 15” Cone
6” Max Drain Drain
7” for 18” Cone
19”
27
7” Drum and Sink 23” 14-1/2” Offset Drum and 14‐1/2”
Moun ng Assembly Cone Moun ng
Assembly
TYPICAL CONTROL PANEL INSTALLATION:
AUTOMATIC REVERSING, NEMA 4X WITH
OPTIONAL REMOTE START/STOP DISCONNECT SWITCH (MODEL RAC2)
VACUUM BREAKER
CONE ASSEMBLY WITH WATER INLET VALVE
*GLOBE VALVE
POWER
SUPPLY
CONNECTOR SLEEVE
SOLENOID VALVE
2” FLEXIBLE DRAIN CONNECTION
FLOW CONTROL * GATE VALVE
VALVE
1/2” COLD WATER
SUPPLY
*TRAP
Red Goat Disposers
165 Independence Ct. Lancaster, PA
17601 * These items are not supplied by Red Goat Disposers.
800‐237‐6628 x 181 Fax: 717‐397‐1997
ITEM NO.______________
MODEL “B”
“B” SERIES ‐ BASIC DISPOSER
TYPE Model No. HP PH Throat Size
OPTIONAL FEATURES:
□ ADAPTOR KITS: Adaptor kits are available to allow installa
on of Red Goat Disposers to
virtually any sink or cone size or configura on. Refer to “Adaptor Kit Selec on Guide” for
specific kit model numbers.
PRODUCT INFORMATION:
□ APPLICATION: Heavy waste area of large kitchen. Ideal for rib, steak, or lobster houses and
clam bars.
□ DESIGN AND CONSTRUCTION:
Waste chamber design permits dual direc onal opera on when used with reversing
control or switch, doubling the life cycle of the sha ering mechanism. Regular waste
chamber available with a 7” throat size.
Access to waste chamber by means of a cast aluminum lid having a 7” diameter throat
opening, removable by means of quick‐release head clamps
Basic body components are cast gray iron, machined, primed and powder coated.
10‐5/8” Diameter rotor/turntable with exclusive adjustable 45° angle and 6 integral im‐
pact breakers constructed of hardened duc le steel alloy for long life use. Matching 45°
sizing ring with 24 grind teeth constructed of hardened duc le steel alloy.
Tight tolerance in the cu ng mechanism allows for approximately 1/8” or 3.175mm or
less of waste to pass through to sanitary.
Bolt‐on, threaded discharge flange for easy removal and ridged drain connec on. Also
includes flexible drain connector that slips over flange and fastens quickly to either metal
or PVC drain line (2” pipe size). This allows installer op ons that best fit their need.
Stainless steel legs and feet, adjustable from 0” to 2”.
Disposer connects to Cone or Sink Assembly by means of a neoprene isola on sleeve and
(2) stainless steel clamps.
“B” Series
Offset Design: For maximum space u liza on, disposer is also available with an 8” offset
Regular Design waste chamber for both Cone and Sink a achments.
□ MOTOR:
7” Throat Size
Reversing, con nuous duty, 1725 RPM (1425RPM, 50Hz), full rated horsepower, double
(Shown) sealed, permanently lubricated ball bearings.
Thermal overload protec on with manual reset bu on (3 and 5 HP models only).
Also available with:
Exclusive sha extension with 3/4” wrench flats to externally de‐jam foreign ma er
Offset Design with 7” Throat without special tools.
Available in 3 & 5HP, 3Ph.
Dual voltage winding: 208‐230/460V, 60Hz ; 208/415V, 50Hz
□ CONTROLS: NOTE: Electrical switches or control centers not included, must be selected as
required.
□ PLUMBING:
(1)3GPM @ 20PSIG, 1/2” NPT & (1)10GPM @ 20PSIG, 1/2”NPT
2” Drain line with trap
Red Goat Disposers
Not grease trap compliant
165 Independence Ct. Lancaster, PA 17601 □ ELECTRICAL:
800‐237‐6628 x 181 Fax: 717‐397‐1997 Please refer to electrical requirements on the last page.
www.redgoat.com
ITEM NO.______________
MODEL “B”
THREE PHASE
THREE PHASE
HP Volts/60Hz Amps Volts/50Hz Amps
208 9.5 208 10.6
3 230 9.2
460
4.6 415 5.3
208 14.5 208 19.4
5 230 14
460 7.5 415 9.7
208 23
7.5 230 22 N/A N/A
460 11
208 30
10
230 28 N/A N/A
460 14
CUTOUT
NOTE: All dimensions shown at 0” foot height adjustment. 13” FOR 12” CONE
16” FOR 15” CONE
4.75” FOR 12” CONE 19” FOR 18” CONE
Cutout 5.5” FOR 15” CONE
1” Min 1”
8” 6.25 FOR 18” CONE 7”
6” Max 1” 8” Connector Sleeve
7”
1” Min
8” WATER
WATER INLET
INLET Drain
Drain
22.5” 27”
Adjustable 0”
Adjustable 0” to 2” to 2”
7-3/8” 9-5/8” 7-3/8” 9-5/8”
These items are not supplied by Red Goat Disposers.
Red Goat Disposers Trap, Globe Valve, and Gate Valve.
165 Independence Ct. Lancaster, PA 17601
ITEM NO.______________
MODEL “C”
“C” SERIES ‐ BASIC DISPOSER
OPTIONAL FEATURES:
□ For High Drum Op on, add HD to the end of the disposer model number.
□ For Hard Chrome Op on (includes 4 impact bars), add HC to the end of the disposer model
number.
□ ADAPTOR KITS: Adaptor kits are available to allow installa on of Red Goat Disposers to vir‐
tually any sink or cone size or configura on. Refer to “Adaptor Kit Selec on Guide” for specific
kit model numbers.
PRODUCT INFORMATION:
□ APPLICATION: Central waste areas of large ins tu ons having large quan es of the tough
waste. Ideal for large food processing houses having waste such as raw steer leg knuckle
bones, ribs, poultry carcasses, king crabs, lobster shells and vegetable waste. Complies with
military specifica ons, including shipboard use. Can be used with salt water applica ons
(specify HC op on).
□ DESIGN AND CONSTRUCTION:
Waste chamber design permits dual direc onal opera on when used with reversing con‐
trol or switch, doubling the life cycle of the sha ering mechanism.
Access to waste chamber by means of a cast aluminum lid having a 7” diameter throat
opening, removable by means of quick‐release head clamps
Basic body components are cast gray iron, machined, primed and powder coated. 15”
Diameter rotor with bolt‐on reversible impact bars and sizing ring are cast duc le iron,
machined, balanced and heat treated.
Tight tolerance in the cu ng mechanism allows for approximately 1/8” or 3.175mm or
less of waste to pass through to sanitary.
Flexible drain connector. Fastens quickly to either metal or PVC drain line (3” pipe size).
“C” Series Stainless steel legs and feet, adjustable from 0” to 2”.
Regular Design Disposer connects to Cone or Sink Assembly by means of a neoprene isola on sleeve and
7” Throat Size (2) stainless steel clamps.
(Shown) Offset Design: For maximum space u liza on, disposer is also available with an 8” offset
Also available with: waste chamber for both Cone and Sink a achments.
Offset Design with 7” Throat □ MOTOR:
Reversing, con nuous duty, 1725 RPM full rated horsepower, double sealed, permanently
Or
lubricated ball bearings.
High Drum
Thermal overload protec on (heaters) in control; must be sized as required.
Available in 10 HP, 3Ph.
Dual voltage winding: 208‐230/460V, 60Hz
□ CONTROLS: NOTE: Electrical switches or control centers not included, must be selected as
required.
□ PLUMBING:
(2)10GPM @ 20PSIG, 1/2” NPT
3” Drain line with trap
Red Goat Disposers Not grease trap compliant
165 Independence Ct. Lancaster, PA 17601 □ ELECTRICAL:
800‐237‐6628 x 181 Fax: 717‐397‐1997 Please refer to electrical requirements on the last page.
www.redgoat.com
ITEM NO.______________
MODEL “C”
THREE PHASE THREE PHASE
HP Volts/60Hz Amps Volts/50Hz Amps
208 14.5 208 19.4
5 230
14
460 7.5 415 9.7
208 23
7.5 230 22 N/A N/A
460 11
208 30
10 230 28 N/A N/A
460
14
NOTE: All dimensions shown at 0” foot height adjustment. CUTOUT
13” FOR 12” CONE
Cutout 4.75” FOR 12” CONE 16” FOR 15” CONE
5.5” FOR 15” CONE 1” 19” FOR 18” CONE
1” Min 8” 7”
1” 6.25 FOR 18” CONE
6” Max 7”
8” Connector Sleeve
1” Min
8” WATER
WATER INLET
Drain
INLET
Drain
VACUUM BREAKER
CONNECTOR SLEEVE
SOLENOID VALVE
FLOW CONTROL
3” FLEXIBLE DRAIN CONNECTION
VALVE * GATE VALVE
MS-1
MODELS MS-2
MS MS-1
MS-2
3⁄4
3⁄4
to 2
to 2
115 or 230
208, 230 or 460
1
3
SERIES
MANUAL ON/OFF SWITCH
(NON-REVERSING)
PRODUCT INFORMATION:
■ APPLICATION: Economical non-reversing On/Off switch for use when
magnetic contactor and overload protection are not required.
LISTED
Consultant/Contractors Approval
3" 3 7/16"
[76 mm] [87 mm]
51/4"
[133 mm]
Red Goat is not responsible for any typographical errors. Due to continued product improvement specifications are subject to change without prior notice.
Red Goat is not responsible for any typographical errors. Due to continued product improvement specifications are subject to change without prior notice.
PRODUCT INFORMATION:
APPLICATION: Provides manually operated reversing of disposer
which doubles the life of impact bars and sizing ring. Use when
magne c contactor and overload protec on are not required.
DESIGN AND CONSTRUCTION: NEMA4, water ght painted enclosure.
Durable steel ac va ng lever with posi ve stops for forward and reverse
posi ons.
WARRANTY: One full year from date of purchase by end user, covering
defects in material or workmanship; parts and labor included.
1⁄2"
13⁄32"
41⁄2"
41⁄4"
1⁄4"
MOUNTING 5⁄16" 31⁄2" 3⁄8" MOUNTING 13⁄32"
SCREW SIZE SCREW SIZE 37⁄16"
75⁄8"
57⁄16" 61⁄8"
45⁄8"
51⁄8"
Red Goat is not responsible for any typographical errors. Due to continued product improvement specifications are subject to change without prior notice.
COLD
WATER
SUPPLY
8” POWER
SUPPLY
BOTTOM VIEW
53⁄4” 41⁄8”
Features:
‐ Exclusive 8 ¼” throat opening to allow for faster feeding
‐ Heavy cast alloy construction to provide extra long life disposer housing
‐ Exclusive shaft extension with ¾” wrench flats to externally
de-jam foreign matter without special tools
‐ Bolt on “continuous duty” motor to increase ease of repair and replacement
‐ Adjustable legs to level disposer and meet drain stub
‐ Removable discharge flange to increase ease of removal
‐ Exclusive adjustable 45° Rotor/Turntable to compensate for wearing parts
‐ Flexible neoprene collar to eliminate vibration and also allow
for easy installation and removal
Red Goat Disposers’ exclusive beveled edge,
adjustable rotor/ turntable makes it possible
to control the right size waste to pass
through the drain.
All rotor/ turntables wear at the point where pulverized waste passes Red Goat Disposers’ sizing ring and outer edge of the rotor/
through the space between the rotor/ turntable and outer sizing ring. turntable are shaped to a 45° angle to mate. Because of this
When the “sizing” opening becomes enlarged, large particles of waste 45° angle design, Red Goat’s rotor/turntables can be adjusted
can pass though and clog the drain line to the sewer. Other food waste vertically to compensate for wear on bot parts. This adjust-
disposers have a vertical opening between the sizing ring and the rotor/ ment can be made a number of times without the need to re-
turntable. When these parts become worn from abrasive slurry, both place the rotor/turntable and sizing ring. The adjustment can
parts have to be replaced. be made “in house” by simply removing a “key” and screwing
the rotor/turntable upward, at .013 inch increments. This fea-
ture alone adds considerable life to your disposer and saves
hundreds of dollars in new replacement parts and labor.
Available only “B” Series Models.
PRODUCT INFORMATION:
APPLICATION: Prewired and preplumbed disposer in portable
stainless steel table to perform in Hostile and Corrosive Envi-
ronments, using readily available seawater.
FEATURES:
· Operates on seawater to conserve valuable fresh water supply.
· Automatic Reversing for even wear and longer life of turntable
and sizing ring.
· Control Panel with sealed printed circuit board.
· NEMA 4X Solenoid valve provides automatic water control.
· Includes clean-out cycle for easy completion of disposer cycle.
· Will handle 750-1000 lbs. of waste per hour...including bones.
· Exclusive 1/10 year warranty - 10 years on housing, 1 year on
other components.
DESIGN AND CONSTRUCTION:
· Extra long wearing turntable impact bars and sizing ring. Heat
treated ductile iron and nickel plated.
· Pallet type base for portable and easy fork lift transport.
· Conveniently located, easy drain connection with hose clamps.
· Recessed control panel, lighted buttons and disconnect switch
housed in NEMA 4X enclosure.
MOTOR:
Shown with optional
full enclosure
· Totally enclosed and fan cooled motor, heavy corrosion resis-
stainless panels tant epoxy painted, sealed bearings, 1.15 service factor.
· Thermal overload reset located on motor
· Available in 2, 3 and 5 horsepower, three phase.
· Explosion-proof motors available.
0RGHOV$YDLODEOH
$37+(
$37+(
$37+(
Extra long wearing turntable impact bars and sizing ring. Rockwell 70C heat treated
and hard chrome plated.
Operates on seawater to conserve valuable fresh water supply.
Control panel with sealed printed circuit board.
Explosion-proof motors and controls available.
Exclusive 1 year/10 year warranty.*
and more…
Corrosion resistant, 316L stainless steel construction 28”W x 22”D x 37”H, 350 lbs.
Totally prewired and preplumbed–just connect water (1/2”NPT), drainline and power.
3” lip
Conveniently located,
easy drain connection
with hose clamp included.
NEMA 4X
Solenoid valve
provides auto-
matic water
control.
Totally enclosed
and fan cooled
motor, heavy corro- Automatic reversing for
sion resistant epoxy even wear and longer life
painted, sealed of turntable and sizing
bearings, 1.15 serv- ring.
ice factor. Recessed control panel,
Will handle 750- lighted buttons and dis-
1000 lbs of waste connect switch housed in
per hour…includ- a NEMA 4X enclosure.
ing bones. Includes a clean out
cycle for easy completion
of disposer cycle.
*10 year warranty on housing.
1 year warranty on remaining components.
RED GOAT has been providing disposers for over 30 years for
the most diverse and adverse conditions imaginable.