Professional Documents
Culture Documents
Scope of Work For EOI and Tech Specs of Rig
Scope of Work For EOI and Tech Specs of Rig
To explore the global market for purchase/acquire newly built offshore jack up rigs,
meeting the Technical requirement as attached at Appendix 1.
1 Newly built rig means, rigs under construction, rigs with completed construction but not
delivered & rigs which are delivered but not contracted/operated.
To provide build cost of each offered rig along with a cost analysis/component-wise
3 breakup.
Appendix 1
TECHNICAL SPECIFICATIONS OF CANTILEVER TYPE HIGH SPEC. OFFSHORE
JACK UP RIG
A B
S. Minimum Technical Specification Details of the Rig to be filled by Rig
No. Owner/Seller
1. Type of Rig 1. Owner/Manager:
2. Rig Name:
The Jack-up Rig(s) is/are to be of High
Specification, Cantilever type, Self- Type & Design:
elevating, Independent legs, which can 3. Classification:
operate round the year in weather conditions
prevailing in India Water. Rig should be Date of construction:
equipped with state of art equipment. 4. Length:
Breadth:
Mast, Travelling Block & Crown 5. Displacement:
Block should have load capacity of Load Line Draft:
750 S.Ton
Operating Draft:
Draw Works should have rated power
of 3000 HP
Draw Works should have Disc Brake. 6. Design Criteria:
Joy Stick Control
7. Limiting Factor
(a) for Field Tow:
(b) for Ocean Tow:
Mast capacity:
Draw Works HP:
Joy Stick control:
2. Design of Rig (For Foot Print) Design of Rig :
(a) MLT-116 C/ BMC-300
Or (b) Equivalent
A B
S. Minimum Technical Specification Details of the Rig to be filled by Rig
No. Owner/Seller
3 Spud Can Spud Can
Spud Can pressure with full pre load should Spud Can Dimensions:
not exceed 39 Ton/Sq Meter.
Dia.
Maximum spud can diameter = 56 ft
Height:
Details of Spud Can Pressure:
4. Operating Water Depth Capability Operating Water Depth Capability:
b) Crown Block
Mfgr.
Model:
Capacity:
A B
S. Minimum Technical Specification Details of the Rig to be filled by Rig
No. Owner/Seller
c) Traveling Block
Mfgr.
Model:
capacity:
d) Drilling hook:
Mfgr.:
Model:
Capacity:
3) Drilling line
Size:
4) Rotating equipment
a) Rotary table
Mfgr -
Model:
size:
5) Disc Brake:
6) Iron roughneck:
6. Illumination Illumination
Illumination of light on various places on the
rig should be as per API RP 14F standard.
7. Leg Length Leg Length
a) Useable leg length below the Hull:
Total useable leg length below the hull b) Total leg Length:
should be minimum 360 feet (excluding leg c) Distance between Aft (Port & Star board) Leg
reserve) centers:
d) Distance between Forward and Aft (Port / Star
board) Leg centers:
A B
S. Minimum Technical Specification Details of the Rig to be filled by Rig
No. Owner/Seller
f) Distance between Aft (Port / Star board) Leg
centers and Hull Stern Edge:
8. Jetting System Leg Jetting System:
9. Variable Load (excluding hook load) Variable load in Metric Tons (excluding hook load)
3) Preload requirement/Capacity:
4) Mooring: -
a) Anchors
(i) No.
Size:
Type:
Condition:
4 Nos Anchor Racks
(ii) No.-------- Size--------Type---------Condition ---
---
c) Winch
No.
Type:
Power
Wire size:
Capacity
d) Other equipment
i) Buoys: , Pendants No. , Size: Length:
ii) Towing arrangement (describe):
3 Nos. Triplex Mud Pumps each rated for Details MP-1 MP-2 MP-3
minimum 2200 HP complete with suitable
supercharging pumps and suitable pulsation Mfgr
dampeners. Model
Input BHP
Available Liner
and Piston sizes
in Inch
Discharge (GPM)
as per Liner
Size(s)
Max. Pressure
(psi), as per liner
Size(s)
Details of
Pulsation
Dampeners
A B
S. Minimum Technical Specification Details of the Rig to be filled by Rig
No. Owner/Seller
Details of
Supercharger
Pumps
Provision of Yes
Suction Strainer
and Dampeners
(d) Mud Gas Separator (Poor Boy (d) Mud Gas separator : (poor-boy degasser)
Degasser)
A B
S. Minimum Technical Specification Details of the Rig to be filled by Rig
No. Owner/Seller
Mfgr.:
Model:
Capacity:
(e) Centrifuge: Two Nos. Mud Centrifuge
with fully variable speed independent main
drive and back drive motors and a maximum (e) Centrifuge (Variable speed design)
G force of 1900G or more and with :
(i) Mfgr.
Bowl size – 14 inch to 18 inch Model:
Capacity:
Bowl speed (rpm) – 3000 or more (variable)
(ii)Mfgr.
Feed Volume –240 GPM or more
Model:
Capacity:
(g) Brine filtration unit (optional) (g) Brine Filtration Unit as per specification
(optional): Available / Not available.
Details, if available
A B
S. Minimum Technical Specification Details of the Rig to be filled by Rig
No. Owner/Seller
19. Trip Tank: One trip tank of adequate Trip Tank
capacity, complete with centrifugal pump
and mud level indicator readable from the Volume:
driller’s station, sensitivity ½ bbl Sensitivity: 1/2 bbl
Trip tank complete with Centrifugal pump & Mud
Level indicator readable from Driller’s station.
c) Capacity
d) Torque rating
i) Continuous:
ii) Intermittent
e) Power requirement:
Power:
Source:
AC-VFD: -
3. Mfgr.
Type:
Load capacity:
Boom length:
Life rafts, Life boats, Rescue boats, Life Does it confirm to IMO/SOLAS regulations :
Vests, Ring Life Buoys.
(i) Transfer hoses on both port and starboard (i) Transfer hoses and its replacements on both sides
side and its replacements (Starboard & Port).
(ii) Mooring lines and its replacements (ii) Mooring lines and its replacements:
(iii) Oil and Gas burner boom assembly (iii) Oil and Gas burner boom assembly
38 1 year operational Spare parts for Details to be provided:
equipment / tool are to be provided for rig
operations.
END OF SPECIFICATIONS