Professional Documents
Culture Documents
Sohail Ahmad: Piping Design Engineer
Sohail Ahmad: Piping Design Engineer
Sohail Ahmad: Piping Design Engineer
Personal Profile I am a hardworking, motivated and enthusiastic person with a proven track
record in piping and drafting. I always strive to achieve the highest standard
possible, at any given task and in any situation. I am accustomed in a challenging
and fast paced environment, particularly when dealing with multiple projects in
same time.
Career Objective Seeking a career with willingness to take up challenges and responsibilities. To
associate with a progressive organization that gives me scope to apply my
knowledge and skills along with my hard work and patience, and to be involved
as part of a team that works dynamically towards the growth of organization, and
where I can grow professionally and further enhance my skills, knowledge and
experience to face and overcome the challenges of today’s changing work
environment.
Experience 5 Years’ experience as Piping Layout Designer (SP3D/PDMS) in Oil and Gas, and
Summary Food and Beverages industries.
Responsibilities-
SP3D Modelling of Equipment’s as per Vendor Data.
SP3D Modelling of symmetric piping for Claus process unit which meets
the process requirement and stress analysis.
SP3D Modelling of steam jacketed piping from Sulphur tank to Sulphur pit.
SP3D Modelling of pipe routing for Sulphur pit.
SP3D Modelling of pipe routing of Condenser Tanks, Coolers, Pumps and
Heat exchanger.
Adding logical support and physical supports for all pipes.
Generating the isometric and back draft work.
Checking Isometrics before issuing.
Generating DGN file for Civil team.
Generating the model in Navis work for review.
Generating GA drawing for Claus Process.
Generating MTO for Claus Process.
Structural input for detailed modelling of Tech Structures and Racks by
structural department.
Responsibilities-
Preparation of Well Head P&ID for 10 wells.
Preparation of Inlet Train Manifold System P&ID.
Preparation of Test Separator and slug catcher P&ID.
Preparation of Methanol Injection System P&ID.
Preparation of Gas Heater System P&ID.
Preparation of Drain Drum System P&ID.
Preparation of Pig launcher and Pig Receiver P&ID.
Preparation of Valve Station P&ID.
Preparation of Gas flow meter P&ID.
Involved in generating reports of valve list and line list numbers.
Responsibilities-
SP3D Modeling of Pig launcher and Pig receiver equipment.
SP3D Modeling of Piping for Pig launcher and Pig Receiver.
SP3D Modeling of Piping for Valve Station.
SP3D Modeling of Piping for Gas flow meter.
Fixing the above Piping for Tie in connection point for pipeline.
Preparation of Isometric for above all stations and back draft work.
Preparation of GA drawings for above piping and equipment.
Preparation of MTO for above piping.
Responsibilities-
SP3D Modelling of Pipe routing for Low Temperature Separator unit.
SP3D Modelling of Pipe routing for Flare System Unit.
SP3D Modelling of Pipe routing for Heat Exchangers, Column and Pumps.
Data consistency and Clash checking for piping.
Preparation of Nozzle Orientation drawings.
Extracting pipe isometrics and checking of isometrics with latest P&ID,
line list, piping layout and piping material specification.
Inter Department co-ordination with other departments.
Modeling of primary and secondary supports.
Modelling of equipment’s like pumps, filters, columns and exchangers and
positioning them as per equipment layout.
Adding temporary structure such as platform and pipe rack at initial stage
for civil team.
Responsibilities-
Modelling of Equipment’s as per Vendor Data.
Reviewing project documentation, work scope & preparation of weekly
progress reports.
Modeling of equipment in SP3D like pumps, filters, exchangers and
arranging them as per equipment layout
Checking of lines for data consistency and clashes in SP3D and preparation
of clash reports
Extraction and preparation of general arrangement drawings using
Drawing manager.
Checking of ISO’s and preparation of BOM.
Participating of internal review & external review and updating the
comments.
Coordinating with Interdisciplinary & Interdisciplinary coordinates for
project related queries.
Responsibilities-
Modelling of Equipment’s as per Vendor Data.
Reviewing project documentation, work scope & preparation of weekly
progress reports.
Modeling of equipment in SP3D like pumps, filters, exchangers and
arranging them as per equipment layout
Checking of lines for data consistency and clashes in SP3D and preparation
of clash reports
Extraction and preparation of general arrangement drawings using
Drawing manager.
Checking of ISO’s and preparation of BOM.
Participating of internal review & external review and updating the
comments.
Coordinating with Interdisciplinary & Interdisciplinary coordinates for
project related queries
Projects
1. VCM PLANT Project
Client – RELIANCE INDUSTRIES LIMITED.
Tool-PDMS and AutoCAD
Responsibilities-
PDMS Modeling of equipment as per the vendor data, vendor package
drawing & SKID drawings.
Fixing the tie-in points for the area.
Preparation of piping material specification
Preparation of equipment layout of separator, water injection module
Preparation of nozzle orientation for vertical columns
Preparation of piping layout for utility service, process lines, firefighting
system.
Checking of equipment layout as per the vendor information available.
Checking of isometrics as per P&ID.
Updating of site queries and generation of as-build drawings.
2. DHDT MANTANANCE UNIT Project
Client – IOCL BARUNI INDIA
Tool-PDMS and AutoCAD
Responsibilities-
PDMS Modeling of equipment as per the vendor data, vendor package
drawing & SKID drawings
Involved in preparation of Equipment modeling in PDMS as per
Equipment detail drawings and layouts and preparing nozzle orientations
of horizontal and vertical vessels.
Modeling of Pipe routing in PDMS as per the P&ID, material specification
and Line List.
Checking of lines for Data Consistency and Clashes in PDMS.
Isometric Extraction and back draft work.
Involved in preparation of Piping GA Drawing, Equipment Arrangement
drawing.
Involved in internal and External Client review and updating of comments.
Checking of Isometrics.
Review PDMS models in Navisworks Review for Clash Checking
Visiting the Site frequently to check the work has done according to PDMS
model.
III Company Name: RELIANCE INDUSTRIES INDIA JAMNAGAR
Duration : OCT 2015 to OCT 2016
Projects
1. JAMNAGAR J3 PROJECT.
Client – RIL
Tool-PDMS and AutoCAD
Responsibilities-
PDMS Modeling of equipment as per the vendor data, vendor package
drawing & SKID drawings
Fixing the tie-in points for the area and skid piping
Preparation of piping material specification
Preparation of equipment layout of separator, water injection module
Preparation of nozzle orientation drawings for vertical columns
Preparation of piping layout for utility service, process lines, firefighting
system.
Checking of equipment layout as per the vendor information available
Checking of isometrics as per P&ID
Updating of site queries and generation of as-build drawings
Projects
1. CARDOLITE SPECIALTY CHEMICALS INDIA PVT. LTD, MSEZ,
MANGALORE
Client – CARDOLITE USA
Tool-PDMS and AutoCAD
Responsibilities-
Preparation of Equipment & Piping modeling.
Co-ordination with the other departments.
Preparation of Nozzle orientation as per general arrangement drawings.
Piping modeling with respect to P&ID and Plot Plan.
Involved in modelling of Equipment’s and Piping in SP3D.
Preparation of Intermediate & Final MTO.
Knowledge of Piping Codes Like ASME.
Designing of Platform and Ladder Assembly.
Model Review with the Naviswork, SPR.
Check the Isometrics as per the P&ID, Piping Specifications, Hookup.
Modeling of pipe supports as per given standards.
Extraction of isometric drawings in PDMS.
Projects:
2. OCP MEA EXPANSION, MOROCCO.
Client –TENOVA DELKOR, BANGALORE
Tool- PDMS and AutoCAD
Responsibilities-
Arrangements of Equipment’s as per the process Requirements and Plot
Plan.
13M Structural Walkway designed as per detailed drawing by client.
Based on slurry flow, slope and 3D bends are provided as per norms.
Preparing/updating Process Flow Diagrams and Piping & Instrumentation
Diagrams.
Pipe routing done by specified PMS given by process team.
Modeling of Supports as per Stress Requirement for critical and noncritical
lines.
For better maintenance and efficiency, suggested different routing for
pumps to thickener.
Modeling and positioning of Nozzles orientation for Thickener, Slurry feed
and Flocculent Tanks.
Providing temporary Platforms for Valve access and maintenance of
Equipment’s
Education
B.E IN MECHANICAL ENGINEERING from Vishveswaraiah Technological
University-Belgaum-2015
PUC from R.K.S College-2011
SSLC from N.A.V.M School-2008
Personal Details
Permanent address : AT+ P/O-SEKHWANIYA (KHAN TOLA ), KUSHINAGAR ,
UTTER PRADESH, INDIA 274402
Date of Birth : 07-10-1993
Marital status : Single
Nationality : Indian
Languages Known : English, Hindi, URDU,
Passport Number : N0434386
Place of issue : Bangalore
Declaration
I hereby declare that the particulars furnished above are correct and true to the
best of my knowledge.