Professional Documents
Culture Documents
Flow Chart: Design of A Non-Composite Beam Under Uniform Loading - Detailed Procedure
Flow Chart: Design of A Non-Composite Beam Under Uniform Loading - Detailed Procedure
Flow Chart: Design of A Non-Composite Beam Under Uniform Loading - Detailed Procedure
Start
EN 1993-1-1
Calculate the design shear
§ 6.2.6 VRd
resistance
This material is copyright - all rights reserved. Use of this document is subject to the terms and conditions of the Access Steel Licence Agreement
No VEd ≤ V Rd
Yes
No MEd ≤ Mc,Rd
Yes
No
No M Ed ≤ M b,Rd
Yes
End
Flow chart: Design of a non-composite beam under uniform loading - detailed procedure
Start
EN 1993-1-1 hw 72ε
§ 6.2.6 (6) ≤
tw η
Yes
EN 1993-1-1
Calculate the shear resistance
§ 6.2.6 (2)
VRd = Vc,Rd
No
This material is copyright - all rights reserved. Use of this document is subject to the terms and conditions of the Access Steel Licence Agreement
Return
Created on Tuesday, March 11, 2008
Flow chart: Design of a non-composite beam under uniform loading - detailed procedure
Start
Cross-section
data
Steel grade
Determine the class of the
cross-section
EN 1993-1-1
Table 5.2
Class 1 or 2 ? No
Class 3 ? No
EN 1993-1-5
Calculate the effective
Chapter 4 Weff,min
modulus
This material is copyright - all rights reserved. Use of this document is subject to the terms and conditions of the Access Steel Licence Agreement
Yes
Yes Calculate the elastic
moment resistance of the
effective cross-section
Mc,Rd = Weff,min fy / M0
Return
Created on Tuesday, March 11, 2008
Flow chart: Design of a non-composite beam under uniform loading - detailed procedure
SN002
Yes
Section properties
Steel grade
Determine slenderness using
Beam length
simple equation
design bending
moments No
EN 1993-1-1
Calculate critical buckling
§ 6.3.2.2 Mcr
moment Mcr
This material is copyright - all rights reserved. Use of this document is subject to the terms and conditions of the Access Steel Licence Agreement
λ LT =
Wy fy λ LT
M cr
Wy = Wpl,y for 1 Class or 2
Wy = Wel,y for Class 3
Wy = Weff,y for Class 4
EN 1993-1-1
LTB may be
§ 6.3.2.2 (4) λ LT > λ LT,0 No
ignored
Return
EN 1993-1-1
§ 6.3.2.3 Calculate the reduction factor
Formula 6.57 LT
LT
EN 1993-1-1
§ 6.3.2.3 (2) Calculate the modified
Formula 6.58 reduction factor LT,mod
LT,mod = LT / f
Created on Tuesday, March 11, 2008
EN 1993-1-1
§ 6.3.2.2 Calculate:
Formula 6.55 Mb,Rd
Mb,Rd = LT,mod Wy fy / M1
Quality Record
Flow chart: Design of a non-composite beam under uniform loading -
RESOURCE Title
detailed procedure
Reference(s) All languages
ORIGINAL DOCUMENT
Name Company Date
Created by Alain BUREAU CTICM 14/03/2005
Technical content checked by Yvan GALEA CTICM 14/03/2005
Editorial content checked by D C Iles SCI 31/5/05
Technical content endorsed by the
following STEEL Partners:
1. UK G W Owens SCI 31/5/05
2. France A Bureau CTICM 10/5/05
3. Sweden A Olsson SBI
4. Germany C Műller RWTH 13/5/05
5. Spain J Chica Labein 20/5/05
Resource approved by Technical
G W Owens SCI 06/6/06
This material is copyright - all rights reserved. Use of this document is subject to the terms and conditions of the Access Steel Licence Agreement
Coordinator
TRANSLATED DOCUMENT
This translation made and checked by:
Translated resource approved by
Created on Tuesday, March 11, 2008