This document provides a checklist for applying melamine spray polish to wood work. It lists the raw materials and procedures that should be followed, including: 1) Using paint from an approved manufacturer that is not expired, 2) Sanding the surface with different grit emery papers, 3) Cleaning and applying wood filler, 4) Applying a natural wood sealer in two coats, 5) Scuffing and allowing more drying time, 6) Applying the finish coat by spraying at a certain pressure, and 7) Allowing surfaces to dry fully before use. The checklist is to be signed off on by the site engineer and project management consultant.
This document provides a checklist for applying melamine spray polish to wood work. It lists the raw materials and procedures that should be followed, including: 1) Using paint from an approved manufacturer that is not expired, 2) Sanding the surface with different grit emery papers, 3) Cleaning and applying wood filler, 4) Applying a natural wood sealer in two coats, 5) Scuffing and allowing more drying time, 6) Applying the finish coat by spraying at a certain pressure, and 7) Allowing surfaces to dry fully before use. The checklist is to be signed off on by the site engineer and project management consultant.
This document provides a checklist for applying melamine spray polish to wood work. It lists the raw materials and procedures that should be followed, including: 1) Using paint from an approved manufacturer that is not expired, 2) Sanding the surface with different grit emery papers, 3) Cleaning and applying wood filler, 4) Applying a natural wood sealer in two coats, 5) Scuffing and allowing more drying time, 6) Applying the finish coat by spraying at a certain pressure, and 7) Allowing surfaces to dry fully before use. The checklist is to be signed off on by the site engineer and project management consultant.
Paint of Approved Manufacturer, Checked for packed container 1
Date of expiry checked 2
Manufacturer's specification and approved procedure available 3 on the site Putty/Filler as Approved, Melamine as Approved 4 Procedures B Sanding by emery paper (180) 1 Sanding by emery paper (320) 2 Clean the surface of all loose particles 3 Apply wood filler & allowed to dry 1 to 2 hrs. 4 Remove excess filler by emery paper (320) 5
Apply approved natural wood sealer & allowed to dry 6 to 8 hrs 6
Scuff it with emery paper (320) & allowed to dry 6 to 8 hrs 7
Sealer 2nd coat applied (If Required) 8 Finish coat by spraying at pressure of 25 to 40 psi 9 Finish coats (2 nos.) applied with 2 to 3 hrs gaps 10 Surface dries 15 to 20 minutes & hard dries 24 to 48 hrs 11
Note 1: Sealer 1 to 2 coats as required
Note 2: Paint 2 to 3 coats as per manufacturer/site requirement