Professional Documents
Culture Documents
CMP Series High Power Anti-Surge Chip Resistors: Features Applications
CMP Series High Power Anti-Surge Chip Resistors: Features Applications
T
AN
n Thick film technology n Power supplies
LI
LO & MP
EE
n Power rating up to 1.5 watts @ 70 °C n Digital meters
FR
CO
N
S
GE
301
oH
HA
NT
IA
PL
CMP Series High Power Anti-Surge Chip Resistors
M
CO
S
oH
*R
Electrical Characteristics
Model
Characteristic
EE
FR
CMP0603 AD CMP0805 CMP1206 CMP2010 CMP2512
LE
M SA E
IA E
*
CO ON RE
PL R
NT
Maximum Overload Voltage 125 V 300 VHS SI D F
Ro VER LEA 500 V 400 V 600 V
Resistance Tolerance ±1 %, ±5 %
Temperature Coefficient
10 Ω to 1 MΩ
(±1 %, E24 & E96 Series) ±100 ppm/°C ±100 ppm/°C ±100 ppm/°C ±100 ppm/°C ±100 ppm/°C
10 Ω to 1 MΩ
(±5 %, E24 Series ±200 ppm/°C ±200 ppm/°C ±200 ppm/°C ±200 ppm/°C ±200 ppm/°C
Note: Solder pad and trace size should be evaluated and board surface temperature should not exceed +105 °C when applying
full rated power.
Product Dimensions
Model L W C D T L
1.60 ± 0.10 0.80 ± 0.10 0.30 ± 0.20 0.30 ± 0.20 0.45 ± 0.10
CMP0603
(.063 ± .004) (.031 ± .004) (.012 ± .008) (.012 ± .008) (.018 ± .004)
2.00 ± 0.10 1.25 ± 0.10 0.40 ± 0.20 0.40 ± 0.20 0.50 ± 0.10 L W
CMP0805
(.079 ± .004) (.049 ± .004) (.016 ± .008) (.016 ± .008) (.020 ± .004)
3.10 ± 0.10 1.60 ± 0.10 0.50 ± 0.25 0.50 ± 0.25 0.55 ± 0.10 C C
CMP1206 W
(.122 ± .004) (.063 ± .004) (.020 ± .010) (.020 ± .010) (.022 ± .004) T
5.00 ± 0.20 2.50 ± 0.20 0.65 ± 0.25 0.60 ± 0.25 0.60 ± 0.10
CMP2010
(.197 ± .008) (.098 ± .008) (.026 ± .010) (.023 ± .010) (.024 ± .004) C C
6.40 ± 0.20 3.10 ± 0.20 0.60 ± 0.25 1.80 ± 0.25 0.60 ± 0.15 T
D D
CMP2512
(.252 ± .008) (.122 ± .008) (.024 ± .010) (.071 ± .010) (.024 ± .006)
MM
DIMENSIONS:
(INCHES) D D
L
L
Model A B L
A
0.90 1.00 3.00
CMP0603
(.035) (.039) (.118)
1.30 1.15 3.50 A
CMP0805
(.051) (.045) (.138) B
Surge Performance
1000
Peak Power (Watts)
100
10
CMP2512
CMP2010
CMP1206
CMP0805
1 CMP0603
0.1
0.0001 0.001 0.01 0.1 1
Sn PLATING
Derating Curve
Rated Voltage
The rated voltage is calculated by the following formula:
-55 70 155
V= P X R V: Rated Voltage (V) Ambient Temperature (°C)
P: Rated Power (W)
R: Resistance Value (W)
Soldering Profile
275
<1> Maximum of 20 seconds between 260 °C peak
+255 °C and +260 °C <1>
255 °C
225
220 °C
Temperature (°C)
190 °C 90 - 150
seconds
175
150 °C Ramp Down
6 °C/second
125
60 - 120 seconds
10 seconds minimum
75
Ramp Up
3 °C/second maximum
25
0 50 100 150 200 250 300
Time (seconds)
How to Order
CMP 0603 - F X - 1002 E LF
Model
CMP = High Power Anti-Surge Resistor
Size
0603 = 0603 Size
0805 = 0805 Size
1206 = 1206 Size
2010 = 2010 Size
2512 = 2512 Size
Resistance Tolerance
F = ±1 %
J = ±5 %
TCR (See Electrical Characteristics chart)
W = ±200 PPM/°C
X = ±100 PPM/°C
Resistance Value
1 % Tolerance:
<100 Ω...............“R” represents decimal point (example: 24R3 = 24.3 Ω)
≥100 Ω...............First three digits are significant, fourth digit represents number of zeros to follow
(example: 8252 = 82.5K Ω)
5 % Tolerance:
≥10 Ω.................First two digits are significant, third digit represents number of zeros to follow
(example: 474 = 470K Ω)
Packaging
E = 5,000 pieces on 180 mm (7 inch) plastic reel, paper tape - CMP0603, CMP0805, CMP1206
4,000 pieces on 180 mm (7 inch) reel, plastic tape - CMP2010, CMP2512
Termination
LF = Tin-plated (RoHS Compliant)
Performance Characteristics
±1 % (E24): CMP0603
222 Resistance value is expressed by 3 digits. The first two digits represent the significant figures of the nominal
222
222
222
resistance value in ohms; the third digit represents the exponent for a base of 10.
Example: 222 = 22 x 102 = 2.2K ohms
±1 %01B
(E96): CMP0603
01B Resistance value is expressed by 2 digits followed by an alpha character multiplier. (Refer to marking table below.)
01B
01B Example: 01B = 100 x 101 = 1K ohms
14.9
CMP0603, CMP0805, CMP1206:
(.587)
MAX.
16.7
CMP2010, CMP2512:
(.657)
MAX.
4.00 ± 0.10
(.157 ± .004)
2.00 ± 0.05 1.75 ± 0.10 2.0 ± 0.5
1.50 +0.10/-0
(.079 ± .002) DIA. (.069 ± .004) (.079 ± .020)
(.059 +.004/-0)
13.0 ± 0.5
W (.512 ± .020)
60.0 ± 0.5
(2.36 ± .020)
F
B
4.00 ± 0.10 20
A MIN.
(.157 ± .004) (.787) 178.0 ± 2.0
(7.008 ± .080)
10.0 ± 1.5
CMP0603, CMP0805, CMP1206:
(.394 ± .059)
13.8 ± 1.5
CMP2010, CMP2512:
(.543 ± .059)
MM
DIMENSIONS:
(INCHES)
REV. 05/26/20
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
Legal Disclaimer Notice
This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and its
affiliates (collectively, “Bourns”).
Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change
without notice. Users should check for and obtain the latest relevant information and verify that such information is current and
complete before placing orders for Bourns® products.
The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions, and
statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical
requirements in generic applications. The characteristics and parameters of a Bourns® product in a user application may vary
from the data sheet characteristics and parameters due to (i) the combination of the Bourns® product with other components
in the user’s application, or (ii) the environment of the user application itself. The characteristics and parameters of a Bourns®
product also can and do vary in different applications and actual performance may vary over time. Users should always verify
the actual performance of the Bourns® product in their specific devices and applications, and make their own independent
judgments regarding the amount of additional test margin to design into their device or application to compensate for
differences between laboratory and real world conditions.
Unless Bourns has explicitly designated an individual Bourns® product as meeting the requirements of a particular industry
standard (e.g., ISO/TS 16949) or a particular qualification (e.g., UL listed or recognized), Bourns is not responsible for any
failure of an individual Bourns® product to meet the requirements of such industry standard or particular qualification. Users of
Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to their
devices or applications.
Bourns® products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining ap-
plications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property or
environmental damage. Unless expressly and specifically approved in writing by two authorized Bourns representatives on a
case-by-case basis, use of any Bourns® products in such unauthorized applications might not be safe and thus is at the user’s
sole risk. Life-critical applications include devices identified by the U.S. Food and Drug Administration as Class III devices and
generally equivalent classifications outside of the United States.
Bourns expressly identifies those Bourns® standard products that are suitable for use in automotive applications on such
products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two
authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard products in an automotive
application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. If Bourns
expressly identifies a sub-category of automotive application in the data sheet for its standard products (such as infotainment
or lighting), such identification means that Bourns has reviewed its standard product and has determined that if such Bourns®
standard product is considered for potential use in automotive applications, it should only be used in such sub-category of
automotive applications. Any reference to Bourns® standard product in the data sheet as compliant with the AEC-Q standard
or “automotive grade” does not by itself mean that Bourns has approved such product for use in an automotive application.
Bourns® standard products are not tested to comply with United States Federal Aviation Administration standards generally
or any other generally equivalent governmental organization standard applicable to products designed or manufactured for
use in aircraft or space applications. Bourns expressly identifies Bourns® standard products that are suitable for use in aircraft
or space applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically
approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard
product in an aircraft or space application might not be safe and thus is not recommended, authorized or intended and is at the
user’s sole risk.
The use and level of testing applicable to Bourns® custom products shall be negotiated on a case-by-case basis by Bourns and
the user for which such Bourns® custom products are specially designed. Absent a written agreement between Bourns and the
user regarding the use and level of such testing, the above provisions applicable to Bourns® standard products shall also apply
to such Bourns® custom products.
Users shall not sell, transfer, export or re-export any Bourns® products or technology for use in activities which involve the
design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use
Bourns® products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions
apply to all uses and applications that violate national or international prohibitions, including embargos or international
regulations. Further, Bourns® products and Bourns technology and technical data may not under any circumstance be
exported or re-exported to countries subject to international sanctions or embargoes. Bourns® products may not, without prior
authorization from Bourns and/or the U.S. Government, be resold, transferred, or re-exported to any party not eligible
to receive U.S. commodities, software, and technical data.
To the maximum extent permitted by applicable law, Bourns disclaims (i) any and all liability for special, punitive, consequential,
incidental or indirect damages or lost revenues or lost profits, and (ii) any and all implied warranties, including implied warranties
of fitness for particular purpose, non-infringement and merchantability.
For your convenience, copies of this Legal Disclaimer Notice with German, Spanish, Japanese, Traditional Chinese and Simplified Chinese
bilingual versions are available at:
Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies
PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf
C1753 05/17/18R
Mouser Electronics
Authorized Distributor
Bourns:
CMP0805-FX-1000ELF CMP0805-FX-1002ELF CMP0805-FX-1003ELF CMP0805-FX-1004ELF CMP0805-FX-
10R0ELF CMP0805-FX-27R0ELF CMP0603-FX-3300ELF CMP0603-FX-3901ELF CMP0603-FX-4703ELF
CMP0603-FX-5102ELF CMP0603-FX-1000ELF CMP0603-FX-1002ELF CMP0603-FX-1003ELF CMP0603-FX-
1004ELF CMP0603-FX-10R0ELF CMP0603-FX-27R0ELF CMP2512-FX-1003ELF CMP2512-FX-1004ELF
CMP2512-FX-3903ELF CMP2512-FX-4702ELF CMP2512-FX-5110ELF CMP2512-JW-221ELF CMP2010-FX-
10R0ELF CMP2010-FX-1502ELF CMP2010-FX-2402ELF CMP2010-FX-47R0ELF CMP2512-FX-1001ELF
CMP2512-FX-1002ELF CMP1206-FX-5601ELF CMP2010-FX-1000ELF CMP2010-FX-1001ELF CMP2010-FX-
1002ELF CMP2010-FX-1003ELF CMP2010-FX-1004ELF CMP1206-FX-1004ELF CMP1206-FX-10R0ELF
CMP1206-FX-1502ELF CMP1206-FX-1602ELF CMP1206-FX-4703ELF CMP1206-FX-5100ELF CMP0805-FX-
3300ELF CMP0805-FX-3901ELF CMP0805-FX-4703ELF CMP0805-FX-5102ELF CMP1206-FX-1001ELF CMP1206-
FX-1003ELF